MadaCide-FD is a hospital-level Disinfectant/Cleaner/Deodorizer that is designed specifically for the infection control needs of healthcare. Efficacy tests have demonstrated that this product is an effective bactericide, virucide, germicide, and fungicide.

It is formulated to disinfect hard, non-porous, inanimate, environmental surfaces, including chrome, glass, painted surfaces, plastics and stainless steel. It is ideal for use with most medical surfaces such as operating rooms, respiratory therapy equipment and medical instruments. Unique anti-corrosion formulation will not damage lenses, cement, plastics, rubber, steel, aluminum, brass or other metal when used as directed.

Kills Influenza A, HIV, Hepatitis B & C, TB, MRSA, VRE, and SARS.

* 3 minute MRSA kill time.
* 5 minute VRE kill time.
* 6 minute TB kill time.
* 30 second HIV kill time.
* 3 minute Hepatitis B & C kill time.

MadaCide MSDS

MadaCide Information

*Spring Sale $75 off Limited Time Only*

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Black Oxide Brass Frame with Black Hardware(*Finish may vary)
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

*Completely black oxided.  *please note that the brass will peak though over time where it sees heavy wear, adding to its character.

For more info please watch the V3R Setup and Tuning Video:

6 Feet of Blue Tempered Spring Steel. 1/2" or 3/4" wide by .018 thick

Each spring set includes: fully punched 18 gauge front and rear springs.

Adam Ciferri Liner Spring Set: Pitbull Liner, Ghost Dog Liner
Adam Ciferri Shader Spring Set: Bulldog Shader, Ghost Dog Shader

Ghost Dog Revival Spring - For the Dan Kubin X Adam Ciferri Ghost Dog Revival

The #sobagrip is a comfort grip for Apple Pencil 1st and 2nd Generation.

The new 2nd Gen Apple Pencil can only be charged and paired by magnetically snapping to the iPad Pro. This makes all other grips obsolete! My solution is the channel which allows the pencil to be charged even with the grip still on it! The channel is wide enough to be compatible with the Apple iPad Pro smart cover. (Should you use a different brand of cover, the #sobagrip can be EASILY removed for charging. Easy on, Easy off!)

The 2nd Gen Apple Pencil has a double tap feature to quickly switch between brushes. The scoop in the front end of the #sobagrip allows for this function.

Made from firm rubber, the grip is very comfortable for long drawing sessions.

The #sobagrip is 100% made in Michigan!!

Apple Pencil and iPad obviously not included.

 Adenna Shadow Black Nitrile Powder Free Gloves- Box of 100 (XL box of 90)

Superior protection against punctures, tears, and chemicals. These synthetic gloves are softer and more elastic than other nitrile exam gloves, without the latex additives. These 100% latex-free gloves eliminate potential allergic reactions to latex proteins. Adenna Shadow gloves have textured surface providing a strong grip for both wet and dry applications.

Here they are, all of our available thumbscrews that our builders typically use on Workhorse machines and customs.

Black Thumbscrews are laser cut steel welded on 8-32 blackened precision screws and each include two black steel washers.

Workhorse Coin Thumbscrews are made from custom stamped brass Workhorse coins welded on 8-32 blackened precision screws and each include two black steel washers. 

Key Thumbscrews are made from old brass keys that we cut and then weld on 8-32 blackened precision screws and include two black steel washers. *May vary from picture, each key is different, no two thumbscrews are the same.

The official Seth Ciferri "build it your fucking self" tattoo machine kit.

Includes everything needed to build a nice tattoo machine... (mojo not included)

• new "fastback" walker-style frame in iron - liner or shader. these new castings feature improved geometry, tighter tolerances, a more user-friendly surface finish, and nice big "PDX,OR" (portland oregon, for those who dont know) cast on the interior of the frame upright, to let folks know it's the real deal, and from whence it came...
• coil set with capacitor and lugs - (iron liners come with 1.25" 6 wrap. iron shaders come with 1.25" 8 wrap.)
• armature bar (liner or shader, depends on what you order)
• spring set
• all screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
• insulator package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
• our beautiful new steel binding posts and Chris Smith copper contact screw. (exclusive to us. unavailable from any other builder or supplier)
• washer package - includes all washers needed... (black, fiber, shims, and lock)
• wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
• full guarantee on the quality of all parts

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

we are proud to say that all parts are made in the USA, the majority of which being made right here in Portland, Oregon.

thanks, good luck, and have fun with your new project!

seth c.