New SOBA V2 Mini Clipper Liner!

Limited Edition Purple!

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

Highlights:

• CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
  
• Anodized Satin Galactic Purple Finish
  
• Heavy Weight Brass Vise and Thumbscrew with a Cosmic Universe Black Powder Coated Finish
  
• Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder 
  
• 1" 8 Wrap Custom Coils

Specifications:

• Great for Medium to Large Groupings
  
• Medium Speed with a Hard Hit 
  
• Pushing 5's to 14's All Day
  
• Running 130-135 Hz @ 6.5 V Unloaded
  
• Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
  

Made in the USA

New SOBA V2 Mini Clipper Liner!

Limited Edition Lime Green x 24k Gold

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

Highlights:

• CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
  
• Anodized Satin Lime Green Finish
  
• Heavy Weight Brass Vise and Thumbscrew with 24k Gold Plated Finish
  
• Matching 24k Gold Hardware plus Custom Drop Down Rear Binder 
  
• 1" 8 Wrap Custom Matching Coils

Specifications:

• Great for Medium to Large Groupings
  
• Medium Speed with a Hard Hit 
  
• Pushing 5's to 14's All Day
  
• Running 130-135 Hz @ 6.5 V Unloaded
  
• Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
  

Made in the USA

Black Friday x Black November Workhorse Model 6 Liner Kits! 

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• SPECS:

  • Full Size Frame milled in house from a solid block of Ductile Iron
  • HD Flat Black Powder Coat Finish
  • Deluxe Workhorse Hardware with Black Oxide Finish
  • Swing Gate Steel Vise
  • Custom 8 Wrap 1" Coils with 1/4" Steel Yoke 
  • High End Specialty Steel Springs
  • Solid Copper Contact with Allen Key Insert
  • Reverse Rear Binder Setup with frame ground on coil deck
  • Long Stroke with a solid hit great for 5s to 14s
    
  • Medium Speed, running around 135-140 unloaded @ 6.5 Volts
  • 6.5 Ounce Weight
  • Made in the USA

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Marv Lerning OG Liner Kit

Kit includes all parts needed to build a nice tattoo machine...it does not however include the skills to build a nice tattoo machine, sorry.

Components:

• CNC Cut Iron Marv Lerning Frame
  
• Black Oxide Finish on Frame
  
• Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
  
• Armature Bar 
  
• Steel binding posts and Chris Smith copper contact screw 
  
• 1 Spring Sets with each kit
  
• 1.25" 6 Wrap Soldered Workhorse Coils 
  
• All Screws you'll need
  
• Washer Package including all washers needed... (steel, fiber, and shims)

Made in the USA

Mike Pike Brass Jonesy Liner

Highlights:

• CNC Cut Billet Brass Frame with PIKE Stamp
• Deluxe Blackened Workhorse Hardware
• Over Under Rear Binder Setup
• Custom Designed Pike Vise
• 1" 8 Wrap Gaffers Taped Coils

Specifications

• Quick with a Solid Medium Hit
• Running 150 -160 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 Ounces
  

Made in the USA

Mike Pike Bullseye Liner with Swing Gate

Highlights: 

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Taped Coils

Specifications:

• Medium Speed with a Hard Hit
• Running 125 - 135 Hz @ 6.5V unloaded
• Pushing 3's-11's with ease
• Weighs 7.2 oz

Made in the USA

Mike Pike Clipper Power Liner

Clippers previously built by SOBA are now being built by Mike Pike as part of SOBA's partial machine retirement! Same quality, care, and performance that the Clipper has always possessed, put together by another one of our highly qualified builders.

Highlights:

• Built and Tuned Specifically for Large Grouping Liner Work
• Cast Iron Clipper Frame
• Hand Sanded and Cleaned up with a HD Black Powder Coat Finish
• Deluxe Black Hardware
• Soba 0.50" Wide Power A-bar
• 1.125" 6 Wrap Black Tape Coils

Specifications:

• Slow Speed with a Heavy Hit
• Pushing 7's to 18's Easy
• Running 115-120Hz @ 6.5 V Unloaded
• Weighs 8 oz 
  

Made in the USA

Mike Pike Half Cup Liner

Highlights:

• CNC Cut Iron Frame with PIKE Stamp
• Workhorse Red Oxide Finish
• Standard Blackened Workhorse Hardware
• 1" 8 Wrap Black Heat Shrink Mini Coils

Specifications:

• Very Quick with a Medium Hit
• Running 145-155Hz @ 6.5 V unloaded
• Pushing 3's-9's Easy
• Weighs a mere 6.5 oz

Made in the USA

Special Edition Mike Pike Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

This is a special limited edition run of Mike Pike's Half Cup Machine Kits! 

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

Included Components: 

• CNC Cut Iron Pike Half Cup Frame, the mini version of the famous full size Mike Pike Teacup frame
• Raw Finish Ready for paint, powder coat, oxide, or torch finish
• Deluxe Workhorse Blackened Hardware
• Armature Bar
• Steel binding posts
  
• 2 Spring Sets with each kit
  
• 1" 8 Wrap Soldered Workhorse Coils 
  
• All Screws you'll need PLUS necessary wrenches
  
• Washer Package including all washers needed... (steel, fiber, and shims)

Typical Half Cup Liner Specifications:

• Liners are Very Quick with a Medium Hit
  
• Running 145-155Hz @ 6.5 V unloaded
  
• Pushing 3's-9's Easy
  
• Weighs 6.5 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, as it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Special Edition Mike Pike Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

This is a special limited edition run of Mike Pike's Half Cup Machine Kits! 

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

Included Components:

• CNC Cut Iron Pike Half Cup Frame, the mini version of the famous full size Mike Pike Teacup frame
  
• Raw Finish Ready for paint, powder coat, oxide, or torch finish
  
• Deluxe Workhorse Blackened Hardware
  
• Armature Bar 
  
• Steel binding posts
  
• 2 Spring Sets with each kit
  
• 1" 8 Wrap Soldered Workhorse Coils 
  
• All Screws you'll need PLUS necessary wrenches
  
• Washer Package including all washers needed... (steel, fiber, and shims)

Typical Half Cup Shader Specifications:

• Shaders are Quick with a Hard Hit
  
• Running 100-105 Hz @ 6.5V unloaded
  
• Pushing 7's-15's Easy
  
• Weighs 6.5 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, as it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Mike Pike Limited Brass Jonesy Liner!

Special Edition Illusion Ice Blue colorway

Highlights:

• HD Illusion Ice Blue Powder Coated CNC Cut Billet Brass Frame with PIKE Stamp
• Deluxe Nickel Plated Hardware plus Solid Silver Contact
• Over Under Rear Binder Setup
• Custom Designed Pike Vise
• Custom 1" 8 Custom Coils

Specifications:

• Quick with a Solid Medium Hit
• Running 145 Hz @ 6.5V unloaded
• Pushing 3's-9's All Day
• Weighs 8 oz

Made in the USA

Mike Pike Limited Brass Jonesy Liner 

Highlights:

• Polished 24k Gold Plated CNC Cut Billet Brass Frame with PIKE Stamp
  
• Deluxe 24k Gold Plated Hardware plus Gold Plated Solid Silver Contact
  
• Over Under Rear Binder Setup
  
• Custom Designed Pike Vise
  
• Custom 1" 8 Custom Green Coils

Specifications:

• Quick with a Solid Medium Hit
  
• Running 145-150 Hz @ 6.5V unloaded
  
• Pushing 3's-9's All Day
  
• Weighs 8 oz
  

Made in the USA

Mike Pike Limited Brass Jonesy Liner 

- Polished Nickel Plated CNC Cut Billet Brass Frame with PIKE Stamp
- Deluxe Blackened Hardware plus Solid Silver Contact
- Over Under Rear Binder Setup
- Custom Designed Pike Vise
- Custom 1" 8 Custom Coils
- Quick with a Solid Medium Hit
- Running 145 Hz @ 6.5V Unloaded
- Pushing 3's-9's All Day
- Weighs 8 Ounces
- MADE IN THE USA