Mike Pike Limited Brass Jonesy Liner!

Limited edition Distressed Magic Purple

Highlights:

• Distressed Magic Purple Powder Coated CNC Cut Billet Brass Frame with PIKE Stamp
• Blackened Deluxe Steel Hardware plus Solid Copper Contact and Polished Brass Binders
• Over Under Rear Binder Setup
• Custom 1" 8 Custom Purple Coils

Specifications: 

• Quick with a Solid Medium Hit
• Running 145 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 oz. (Brass weights a little more, but naturally reduces vibration)
  
  

Made in the USA

Mike Pike Limited Brass Jonesy Liner 

Limited Magic Purple x Gold colorway!

Highlights:

• Magic Purple Powder Coated CNC Cut Billet Brass Frame with PIKE Stamp
• Over Under Rear Binder Setup
• 24k Gold Plated Deluxe Hardware plus Solid Silver Contact
• Custom 1" 8 Custom Coils

Specifications:

• Quick with a Solid Medium Hit
• Running 145 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 oz (Brass weights a little more, but naturally reduces vibration)'
  

Made in the USA

Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

Highlights:

• High-grade Aluminum body precision milled with a durable Black Anodize Finish
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
  
• Clipcord connection
• Vertical swing gate tube vice that will bite and hold all disposable and stainless tubes 
  
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
  

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
  
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
  
• Lightweight - a mere 4.5 oz
  

Made in the USA

New Mike Pike Smith & Howard Liner!

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a "Blackie Frame" for its association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

Highlights:

• Mini Pike S&H Frame CNC Cut from Iron Bars
  
• Black zinc frame finish with Deluxe Workhorse Blackened Hardware to match
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
• Long fluted armature speed bar
• Blackened steel binding posts
• 1" 8 Wrap Workhorse Coils

Specifications:

• Medium Speed with a Long Stroke and Hard Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 14s
  
• Weighs 6.4 oz

Made in the USA

Special Limited Edition run of Mike Pike Smith & Howard Machine Kits!

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a Blackie frame for its association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Pike S&H Frame
  
• Black Zinc Finish 
  
• Deluxe Workhorse Blackened Hardware
  
• Armature Bar 
  
• Steel binding posts
  
• 2 Spring Sets with each kit
  
• 1.25" 8 or 6 Wrap Soldered Workhorse Coils 
  
• All Screws you'll need PLUS necessary wrenches
  

Typical Liner Specs:

• Medium Speed with a Long Stroke and Hard Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 14s

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Mike Pike Teacup Liner

Tough and versatile, this liner machine designed by Mike Pike is a true workhorse.

Highlights:

• Black Zinc CNC Cut Iron Frame
• 1 1/8" Deluxe 6 Wrap Coils with Gaffers Tape
• Deluxe Blackened Hardware
• Side Mount Rear Binder

Specifications:

• Running Quick and Steady with a Medium Hit
• 150-155Hz @ 6.5 V unloaded
• Pushing 3's to 9's all day long
  
• Weighs 7.3 oz
  
  

Made in the USA

NEW Mike Pike x Destroy Troy Halfcup Liner!

Limited Edition Black x Gold

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Cray Bar with added weight on the front end
  
• HD Matte Black Powder Coated Aluminum Frame
• 24k Gold Plated Steel Destroy Troy Forward-Weighted Guillotine Vise
• Deluxe Gold Plated Hardware
• 24k Gold Plated Spring Shelf Yoke for Superior Connectivity
• Pure Silver Contact Screw
• Stainless Springs
• Custom 1" 9 Wrap x 7 Wrap forward weight coil combo

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

Mike Pike x Destroy Troy Jonesy Liner

These are the second special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, originally the Jonesy was going to be their first collaborative machines, but the Teacups jumped in first while we dialed in these Jonesy machines. Now after many frame adjustments, tweaks and updates, they have evolved and improved, and we couldn't be happier with the result. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Black Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• Black Super Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar and Deluxe Hardware
  
• Custom 8 Wrap Matching Fish Scale Coils
  
• Baby Blue HD Powder Coat Brass Jonesy Upright
  

Specifications:

• Medium Speed with a Solid Hit
• Running 140-145 Hz Unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Mike Pike x Destroy Troy Jonesy Liner

These are the second special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, originally the Jonesy was going to be their first collaborative machines, but the Teacups jumped in first while we dialed in these Jonesy machines. Now after many frame adjustments, tweaks and updates, they have evolved and improved, and we couldn't be happier with the result. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• Super Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Destroy Troy Warp Drive Cray Bar
• Custom 7 Wrap Black Electrical Coils
  
• Pure Silver Contact
• Raw Light Polished Brass Jonesy Upright
  
• Black Oxide Vise and Deluxe Hardware

Specifications:

• Medium Speed with a Solid Hit
• Running 130-135 Hz Unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
  

Made in the USA

Mike Pike x Destroy Troy Jonesy Liner

Limited Edition Disco Blue colorway

These are the second special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while; originally the Jonesy was going to be their first collaborative machines, but the Teacups jumped in first while we dialed these in. Now after many frame adjustments, tweaks, and updates, they have evolved and improved. Runs incredibly smooth, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use. We are immensely happy with how these turned out and hope you will be too.

Highlights:

• Lightweight Ice Blue Anodized Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• Black Oxided Extra Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Deluxe Hardware
  
• Blackened Destroy Troy Cray Bar
  
• Custom 9 Wrap Purple Coils with Pike x Destroy Troy Washers
  
• Disco Blue x Clear HD Powder Coat Brass Jonesy Upright and Wingnut
  

Specifications:

• Medium Speed with a Solid Hit
• Running 140 Hz unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz forward weighted machine

Made in the USA

Mike Pike x Destroy Troy Jonesy Liner

These are the second special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, originally the Jonesy was going to be their first collaborative machines, but the Teacups jumped in first while we dialed in these Jonesy machines. Now after many frame adjustments, tweaks and updates, they have evolved and improved, and we couldn't be happier with the result. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• 24k Gold Plated Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• 24k Gold Plated Super Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
• Custom 8 Wrap Custom Money Coils with Reflective Fish Tape
  
• 24k Gold Plated Brass Jonesy Upright
  
• 24k Gold Plated Vise and Deluxe Hardware

Specifications:

• Medium Speed with a Solid Hit
• Running 135-140 Hz Unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Mike Pike x Destroy Troy Jonesy Liner!

These are the second special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while; originally, the Jonesy was going to be their first collaborative machines, but the Teacups jumped in first while we dialed in these machines. Now after many frame adjustments, tweaks, and updates, they have evolved and improve. Running incredibly smooth, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use. We couldn't be happier with the result and hope you feel so too.

Highlights:

• Lightweight Purple Anodized Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• Black Oxided Extra Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Deluxe Hardware
  
• Blackened Destroy Troy Cray Bar
  
• Custom 8 Wrap Matching Reflective Coils
  
• Rainbows End HD Powder Coat Brass Jonesy Upright
  

Specifications:

• Medium Speed with a Solid Hit
• Running 140-145 Hz unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz forward weighted machine
  

Made in the USA

Mike Pike x Destroy Troy Jonesy Liner!

These are the second special collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while; originally the Jonesy was going to be their first collaborative machines, but the Teacups jumped in while we dialed in these machines. Now after many frame adjustments, tweaks, and updates, they have evolved and improved. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use. We couldn't be happier with the result and hope you will be too.

Highlights:

• Lightweight Olive Green Anodized Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• Ugly Green HD Powder Coat Brass Jonesy Upright
• Black Oxided Extra Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Oxided Deluxe Hardware
  
• Blackened Destroy Troy Cray Bar
  
• Custom 8 Wrap Matching Reflective Coils
  

Specifications:

• Medium Speed with a Solid Hit
• Running 140-145 Hz unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz forward weighted machine

Made in the USA

Mike Pike x Destroy Troy Teacup Liner - Gold / Black

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Destroy Troy Warp Drive Cray Bar
• Refreshing Custom 8 Wrap Topo Chico Anniversary Coils
  
• Raw Light Polished and Stamped Aluminum Frame
• Black Oxide Vise and Deluxe 24k Gold Plated Hardware
• Steel Spring Shelf Yoke for Superior Connectivity

Specifications:

• Medium Quick Speed with a Solid Hit
• Running 135-140 Hz Unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Mike Pike x Ernie Carafa Cast Iron FRAME

Very special collaborative frame designed and cast in Iron by Mike Pike and Ernie Carafa years ago, recently found and pulled from rusty buckets, cleaned up, cnc milled with collet vises brazed in. These are very limited and once they are gone they will forever be gone. 

Frame Specs:

• Cast Iron Frame
• Raw Oiled Finish
• Brazed Collet Vise
• Forward facing wingnut that won't ride your hand or get in the way
• Welded Cast Iron Wingnut Thumbscrew Included

Typical Machine Specs:

• Typically Built as a Long Stroke Liner....can be built as a Shader or Hybrid as well
• Slow Speed with a Solid Hit
• Running 125-130 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 11s

As described by Mike Pike:

”I think it was around 2003 or 2004 Ernie wanted to make up some of these cast frames he made up a drawing and a buddy of mine that worked at the foundry in downtown LA made the match plate. Ernie was a good guy, and it was kind of like a tribute to him. It literally took forever for the guy to get the frames done and then milling was going to be done by another guy that had all the Frames but ended up passing away and then I mailed some in the garage and Ernie milled some and we built them up. He wanted to make he wanted to make the castings kind of thick to where they could be mailed to take any size coil and have a lot less draft angle than the ones that he did with Paul Rogers”

Made in the USA by Mike Pike