BLACK FRIDAY X BLACK NOVEMBER Roundback Liner Kit! Special edition run of machines at special pricing!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Aaron Cain Roundback Liner V2.0

Based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

Highlights:

• CNC Cut Iron Frame
  
• Bead Blast Finish Ready for Paint, Powder, or Plating
• Deluxe Workhorse Blackened Steel Hardware
  
• 1" 8 Wrap Coils

Typical Specifications:

• Quick with a Medium Stroke and a Solid Medium Hit
  
• Running 150-155 Hz @ 6.5 V unloaded
  
• Pushing 3's to 9's with ease
  
• Weighs 6.45 oz
  

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

 BLACK FRIDAY X BLACK NOVEMBER Roundback Shader Kit! Special edition run of machines at special pricing!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Aaron Cain Roundback Shader V2.0

Based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

Highlights:

• CNC Cut Iron Frame
  
• Bead Blast Finish Ready for Paint, Powder, or Plating
• Deluxe Workhorse Blackened Steel Hardware
  
• 1" 8 Wrap Coils

Specifications:

• Long Stroke with a Medium Hit
  
• Running 100-105 Hz @ 6.5 V unloaded
  
• Pushing 5's to 11's no problem
  
• Weighs 6.45 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

**NEW DK Pricing - Starting October 1st we shifted all Dan Kubin machine pricing lower! Thanks to Dan for some clever engineering and milling updates / investments, we are now able to shift all DK pricing down. Times are tough and tariffs are crazy right now...thankfully we produce all DK machines in the USA and have the ability to pass the savings onto our customers. 

Special Limited Edition Biomech Dan Kubin V3/24 Sidewinder carved by Aaron Cain!

Highlights:

• Custom Aaron Cain Hand Carved Bio-Mech Brass Frame, Armature, and Motor Cover with custom patina finish (carving varies a little on each machine)
  
• Limited Edition of 2
• Polished Brass Frame with Black Hardware (*Finish may vary)
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar:
  • Needle Bar Tensioner - when setting up your needle and tube, position needle tensioner in desired position depending on the amount of tension you want to add to the needle bar. Adjust position by loosening the thumbscrew and then tightening when you reach desired tension. 
  • Rubber Band alternative setup - Loosen / remove thumbscrew to take the needle tensioner off. Then when setting up the machine, wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples. 
    
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.

Description:

The most significant update to the V3/24 Sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

Aside from the added Needle Bar Tensioner, this new version of remastered V3 Sidewinder is dialed in and updated with various improvements to increase machine longevity and consistency. 

The V3/24 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

Made in the USA!

All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Aaron Cain Copper Tools now available!

Based off Aaron's hand carved Copper Tools, we worked with Aaron on designing a version we could cut and CNC mill to add some extra shape and depth to them, while also keeping them affordable. These tools were a lot of work, but a fun project and very useful a daily carry addition. They work great as a bottle opener, door opener, button pusher, defense mechanism, or really any other creative purpose. Copper is naturally antimicrobial, making it a great material for insulating oneself from high touch surfaces that may contain harmful microbes and disease.

Specs:

• Cut from 1/4" Copper
• Milled, Chamfered, Sanded, Tumbled, Stamped, and Lightly Polished
• 2.5" x 5" Overall Dimension
• Oblong 1.25" x 1.125" Finger Hole
• Limited Run

Made in the USA

**The use of a Copper Alloy surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. The Copper Alloy surface material has been shown to reduce microbial contamination, but it does not necessarily prevent cross-contamination.

Aaron Cain Roundback Liner V2.0

Based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

Highlights:

• CNC Cut Iron Frame
  
• HD Black Powder Coat Finish
  
• Deluxe Workhorse Blackened Steel Hardware
  
• 1" 8 Wrap Custom Dyed Money Coils

Specifications:

• Medium speed with a Medium Stroke and a Solid Hit
  
• Running 130-135 Hz @ 6.5 V unloaded
  
• Pushing 3's to 7's with ease, turn up volts to push 9-11s
  
• Weighs 6.45 oz
  

Made in the USA