New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard CAin geometry set up to wrong quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Milled Carved Iron Frames
• Limited HD Matte Olive Green Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

Aaron Cain x Mike Pike Custom Carved Jonesy Liner!

• Mike Pike CNC Cut Billet Brass Frame
• Biomech Carved Frame and Parts by Aaron Cain!
• Deluxe Blackened Cain Hardware
• Over Under Rear Binder Setup
• Custom Coin Wingnuts
  
• 1" 8 Wrap $5 Bill Coils
• Quick with a Medium Hit, Best for Smaller Work
  
• Running 145-150 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 Ounces
• Limited Edition of 5
• MADE IN THE USA

• OG Full Size CNC Cut Ductile Iron Rusto Frame
• Biomech Carved and Frame Finish by Aaron Cain!
• Carved and Blackened Deluxe Hardware
• Custom 1.25" 6 Wrap T-Top Coils with Dyed $5 Bills
  
• Custom Matching Handmade SOBA Washers!
• Medium Quick with a Solid Hit
• Great for Small to Medium Sized Groupings
• Pushes 3's to 9's easy, turn up for 11's
  
• Running 135-145 Hz @ 6.5 V Unloaded
• Weighs 6.8 oz
• MADE IN THE USA

Brian Bruno RAFFLE TICKET - Aaron Cain x Chris Smith Custom Carved Liner!

$20 Raffle Tickets for this Custom collaborative machine made by Chris Smith and Aaron Cain with 100% of ticket sales donated to Brian Bruno and his family. For more info or to donate directly please visit the GoFundMe page here - https://www.gofundme.com/f/brian-bruno-brain-surgery-recovery

Raffle Details:

• $20 a ticket
• 200 Tickets available, one ticket = one entry
• No limit on entries per person, buy as many as you would like :)
• Drawing will be Friday, May 5th
  

Machine Specs:

• 4-piece Custom Cut and Welded Frame with Chris Smith Vise
• Biomech Carved Frame and Parts by Aaron Cain!
• Deluxe Hardware
• Custom Money Coils
• Medium Speed with a Solid Hit, Good for Medium to Large Grouping Work
  
• Running 125 Hz @ 5.5V Unloaded
• Pushing 7's-14's All Day
• Weighs 8 Ounces
• Custom 1 of 1
  
• MADE IN THE USA

Special Limited Edition Biomech Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid carved by Aaron Cain!!!

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Biomech Carved and Finished by Aaron Cain!
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner or a quick shader. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Heat Blackened Finish
  
• Deluxe DK Blackened Hardware and Stainless Spring
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible

Special Limited Edition Biomech Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid carved by Aaron Cain!!!

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Biomech Carved and Finished by Aaron Cain!
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner or a quick shader. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom HD Seafoam Powder Coat Finish
• Deluxe DK Blackened Hardware and Stainless Spring
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Special Limited Edition Biomech Dan Kubin V3R Sidewinder carved by Aaron Cain!!!

Machine Specs:

• Raw Brass Frame (for earned natural patina it will gain over time and use) plus Blackened Hardware
  
• Carved and Finished by Aaron Cain!!
• DK Thumbscrew, Batch 4 weighted Armature Bar, and Stroke Wheel
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin. Also good for shading and color blends if you adjust your stroke and voltage.
  
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Aaron Cain Bottle Opener Specs:

- CNC Cut Iron Frames
- Blackout Finish
- Deluxe Workhorse Blackened Hardware
- 1" 8 Wrap Custom Black Gaffers Coils
- Quick and Zippy, Medium Stroke and Medium Hit
- Running 145-150 Hz @ 6.5 V unloaded
- Pushing 3's to 7's with ease, turn up for 9's
- Weighs 6.45 Ounces
- MADE IN THE USA

And yes, it does actually open bottles :)

*BLACK FRIDAY Special Edition run at special pricing! Murdered Out Black on Black on Black Bottle Openers setup to run quick and zippy for smaller groupings!

Aaron Cain Bottle Opener Specs:

- CNC Cut Iron Frames
- Blackout Finish
- Deluxe Workhorse Blackened Hardware
- 1.25" 8 Wrap Custom Black Gaffers Coils
- Medium Speed, Long Stroke, Medium Hit
- Running 105-110 Hz @ 6.5 V unloaded
- Pushing 5's to 9's with ease, turn up for 11's
- Weighs 6.45 Ounces
- MADE IN THE USA

And yes, it does actually open bottles :)

Limited Edition Aaron Cain Octet Liner! Classic Aaron Cain styling mixed with hiprecision building and tuning resulting in a basic Workhorse version of his famed customs and carved machines.

These special edition Black Friday machines are setup a little different than Aaron's typical quick and zippy Liners. Utilizes a heavier armature, these limited machines have a bit more hit to push medium to larger groupings at a medium speed. 

- CNC Cut Iron Mini Frames
- HD Textured Black Powder Coat Finish
- Deluxe Workhorse Blackened Steel Hardware
- 1" 8 Wrap Black Tape Shrink Coils
- Medium Speed with a Solid Hit
- Running 135-140 Hz @ 6.5 V unloaded
- Pushing 3's to 9's with ease
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Roundback Liner Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- CNC Cut Iron Mini Frames
- 2 Tone Distressed Green Powder Coat Finish
- Standard Workhorse Blackened Steel Hardware
- 1" 8 Wrap Custom Dyed Money Coils
- Quick with a Medium Stroke and a Solid Medium Hit
- Running 145-150 Hz @ 6.5 V unloaded
- Pushing 3's to 7's with ease, turn up volts to push 9s
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Roundback Shader Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- New CNC Cut Iron Frame
- 2 Tone Distressed Green Powder Coat Finish
- Standard Workhorse Blackened Steel Hardware
- 1" 8 Wrap Custom Dyed Money Coils
- Long Stroke with a Medium Hit
- Running 100-105 Hz @ 6.5 V unloaded
- Pushing 5's to 11's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to run quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Milled Carved Iron Frames
• HD High Gloss Translucent Burnt Earth Frame
  
• Deluxe Workhorse Polished Brass Hardware
• 1.125" 10 Wrap Custom Etched Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running around 145 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

Aaron Cain Limited Edition Nickel Silver Bolt-Up Liner

This special run of limited machines is built on Aaron's bolt up base with a custom bio mech sideplate composed of a Stainless Steel and Bronze composite with zirblast finish. High performing machines with Aaron's iconic aesthetics.

- CNC Cut Iron Base
- 1" Deluxe 8 Wrap Custom Dollar Bill Coils
- Deluxe Blackened Hardware
- Vertical Rear binder
- Quick  Speed with a Solid Hit
- 145-150 Hz @ 6 V unloaded
- Pushing 3's to 7's no problem, turn up for 9's
- Tough and Versatile, a true Workhorse
- Weighs 7.3 oz
- MADE IN THE USA