Black Friday x Black November Adam Ciferri Tetris Shader! Special edition run of machines at special pricing!

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• Custom Gold Green Textured Powder Coat Finish
• Matching Steel Swing Gate Vise
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's... also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Weighs 6.5 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Ghost Dog Liner! Special edition run of machines at special pricing!

Limited Sparkle Red x Gold

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Custom Keg Coil
• Custom Fractured Red Powder Coat Finish
• Deluxe 24K Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Ghost Dog Shader! Special edition run of machines at special pricing!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Custom Fractured Red Powder Coat Finish
• Deluxe 24K Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Cory Rogers Cracker Liner! Special edition run of machines at special pricing!

Highlights:

• CNC Cut Iron Cracker Liner Frame with Lightened / Drilled out Upright
• Custom Slide Vise with Inlaid Insert 
• Multicolored Powder Coat Finish
• Blackened Workhorse Hardware PLUS Custom Dice Contact
  
• 8 Wrap 1" Custom Coils

Specifications:

• Medium Speed with a Hard Hit
• Great Liner for Traditional Work
• 130-135 Hz. @ 6 V unloaded
• Pushes 5s to 11s with Ease
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Cory Rogers Cracker Liner! Special edition run of machines at special pricing!

Highlights:

• CNC Cut Iron Cracker Liner Frame with Lightened / Drilled out Upright
• Custom Slide Vise with Inlaid Insert 
• Multicolored Powder Coat Finish
• Blackened Workhorse Hardware PLUS Custom Dice Contact
  
• 8 Wrap 1" Custom Coils

Specifications:

• Medium Speed with a Hard Hit
• Great Liner for Traditional Work
• 130-135 Hz. @ 6 V unloaded
• Pushes 5s to 11s with Ease
  

Made in the USA

 BLACK FRIDAY X BLACK NOVEMBER V3/23 Sidewinder in Pink! Special edition run of machines at special pricing!

We found a small Batch of V3/23 Sidewinders and built them up with the updated V3/24 Needle Bar Tensioner and V3/24 armature and components. Slightly less hit than the V3/24, but still great for small to medium groupings. 

Machine Specs:

• HD Pink Powder Coated Brass Frame with Black Hardware
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

**The most significant update to this sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

 BLACK FRIDAY X BLACK NOVEMBER Eddy Deutsche Blade Runner! Special edition run of machines at special pricing!

Eddy Deutsche Blade Runner Liner!

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Black Long Nipple A Bar
  
• Custom HD Baby Blue Powder Coat
  
• Deluxe Blackened Hardware plus pure Matching Dice Copper Contact
• Custom Hand Wound 8 Wrap Natural Phenolic Coils

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running around 130-135 Hz Unloaded at 6.5V
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
  
• Weighs about 7 oz

Made in the USA

BLACK FRIDAY x BLACK NOVEMBER Joshua Bowers SC Bobber with Olive Sparkle Finish! Special edition run of machines at special pricing!

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Sparkle Gold Dark Olive Powder Coat Finish
  
• Matching Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

BLACK FRIDAY x BLACK NOVEMBER Joshua Bowers SC Bobber in Seafoam! Special edition run of machines at special pricing!

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Seafoam Powder Coat Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

 BLACK FRIDAY X BLACK NOVEMBER Juan Puente Liner Kit! Special edition run of machine kits at special pricing!

Kit includes all parts needed to build a great tattoo machine... but it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Juan Puente Frame
• Clear Powder Coat Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 6 Wrap Custom Soldered Coils
• Liner Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Speed with a Solid Hit
• 140-145 Hz at 6.5 V Unloaded
• Pushing 3-11's Easy
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

BLACK FRIDAY X BLACK NOVEMBER Lightweight Weiner Dog Frame! Special edition frames at special pricing!

Specifications:

• CNC Cut Iron Frame
  
• Designed by Seth Ciferri
  
• Red Oxide Finish
• Geometry for 1" Coils
• Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
  

Made in the USA

Black Friday x Black November Mike Pike PMA Direct Drive Rotary! Special edition run of machines at special pricing!

Limited Edition Raspberry x Gold

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time. 

Highlights:

• Limited Edition Run of Transparent Raspberry Powder Coat. 24k Gold Plated Motor Cap, Swing Gate Vise, and Hardware
• High-grade Aluminum body precision milled frames and components
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Clip cord connection
• Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem
• Great with needle on bar or cartridges
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
• Lightweight at a mere 4.5 oz

Made in the USA

Seth Ciferri Mini Fastback Liner

Highlights:

• CNC Cut Iron Mini Fastback Liner Frame with Chopped Vise
  
• Textured HD Black Powder Coat Finish
  
• Black Workhorse Deluxe Hardware and Raw Brass Coin Thumbscrew
  
• Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
  
• 1" 8 Wrap Custom Coils

Specifications:

• Medium Slow Speed with a Medium Hard Hit
  
• Running 125-130 Hz @ 6 V Unloaded
  
• Pushing 5's to 11's No Problem
• Weighs 7.2 oz
  
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Mike Pike x Destroy Troy Halfcup Liner! Special edition run of machines at special pricing!

Limited Edition Black x Gold with special UFO coils

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Cray Bar with added weight on the front end
  
• HD Matte Black Powder Coated Aluminum Frame
• 24k Gold Plated Destroy Troy Forward-Weighted Guillotine Vise
• Pure Silver Contact Screw
  
• Stainless Springs
• Custom 1" 8 Wrap Coils with Alien Etched Powder Metal Foil
  

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Mike Pike x Destroy Troy Halfcup Liner! Special edition run of machines at special pricing!

Limited Edition Black x Black with black and pink coils 

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• HD Matte Black Powder Coated Aluminum Frame
• Steel Destroy Troy Forward-Weighted Guillotine Vise
• All Black Hardware
  
• Stainless Springs
• Custom 1" 9 Wrap x 7 Wrap forward weight coil black and pink combo

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA