Limited Mike Pike x Cory Rogers Linear Rotary!

Special Edition Seafoam x Purple colorway with custom laser etched skull & dagger design by Cory Rogers

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Highlights:

• High-grade Aluminum body precision milled
• Custom Purple Anodized Parts with HD Seafoam Powder Coated Frame, plus Polished Brass Deluxe Binders and Cast Workhorse Wingnut
  
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way

Specifications:

• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with needle on bar or cartridges
• Lightweight weighing in at a mere 4.5 oz

Made in the USA

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of Hot Pink Powder Coated Bodies with Blackened Motor Cap, Swing Gate Vise, and Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

• High-grade Aluminum body precision milled
• Custom Green Anodized Parts with Rainbow Glitter Powder Coated Frame, plus 24k Gold Plated Binders and Wingnut
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

New Mike Pike PMA Direct Drive Rotary!

Limited Edition White Disco Gold x Gold colorway

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

Highlights: 

• Limited Edition Run of White Disco Gold Powdered Coated Aluminum Frames PLUS 24k Gold Plated Motor Cap, Swing Gate Vise, and Hardware.
• High-grade Aluminum body precision milled frames and components
• Clipcord connection
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
  
• Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes 
  
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
  
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
• Lightweight at a mere 4.5 oz

Made in the USA

SOBA B&G Race Horse Shader

New B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Highlights:

• Anodized Featherweight Aluminum Frame
  
• Steel Swing Gate Vise guaranteed to lock tight on all tubes
  
• Deluxe Black Hardware
  
• 8 Wrap 1" Custom Coils
  

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
• Weighs 5.4 oz
  
  

Made in the USA

Adam Ciferri Ghost Dog Compression Machine

• Tuned for all-day, every-day street shop and/or custom tattooing
• Adjustable to accommodate any style of tattooing, simply adjust the compression spring after the machine is broken in
• Initially comes set up as a shader / power liner, good for Quick Color Packing or B&G Work / Color Blends
• CNC Cut Iron with the highest precision and care
• Mini frame with 1" Custom Keg Coil
• Classic Black Finish
• Deluxe Plated Hardware
• Weighs in at a mere 6 oz
• MADE IN THE USA

A few words from Adam addressing Frequently Asked Questions:

1) Is this a liner or a shader? Yes. Adjust the gap and the compression spring via the adjustment screw beneath the frame and you’ve got a whole lot of range that will make a whole spectrum of tat wizardry possible.

2) Will it push cartridges? Yes, once it’s broken in a bit, you can get down however you’d like-I certainly won’t judge you.

3) How long does it take to break in? 1-2 hours of tattooing should do it. How much does it weigh? 5.8 ounces.

4) What types of needle groupings will this thing push? 5 needle outlines and up, 7 mags and up.

The Diamond Direct Drive Rotary

A collaborative project by Adam Ciferri and Mike Giant

Highlights:

• Aluminum Body
  
• Black Powder Coat Finish

Specifications:

• Running a versatile 4mm stroke
  
• Smooth black n grey or color blends at 4-5 volts
  
• Solid black and color packing at around 6 volts
  
• Outlines happen at around 7 volts
• Weighs 4 oz

Made in the USA

Special Edition with artwork by Julia Campione of Good Omen Tattoo!

Limited Mike Pike x Cory Rogers Linear Rotary!

🔥Purple x Dark Blue GOOD OMEN COBRA🔥

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Gold Hard Anodized Components and Seafoam x Olive Powder Coated Frame
  
• Custom Good Omen Cobra Etching by Julia Campione
  
• Blackened Deluxe Hardware
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

Limited Mike Pike x Cory Rogers Linear Rotary!

Special Edition with artwork by Julia Campione of Good Omen Tattoo!

🔥Watermelon Flavored GOOD OMEN COBRA🔥

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Highlights:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Pink Hard Anodized Components and Bright Green Frame
  
• Custom Good Omen Cobra Etching by Julia Campione
  
• Blackened Deluxe Hardware
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way

Specifications:

• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA

Thanks and enjoy,
Mike & Cory

Special Edition with artwork by Julia Campione of Good Omen Tattoo!

Limited Mike Pike x Cory Rogers Linear Rotary!

🔥Purple x Green GOOD OMEN COBRA🔥

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Purple Hard Anodized Frame and Green Anodized Parts
• Polished Nickel Plated Hardware
• Custom Good Omen Cobra Etching by Julia Campione
  
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

Limited Mike Pike x Cory Rogers Linear Rotary!

Special Edition with artwork by Julia Campione of Good Omen Tattoo!

🔥Cotton Candy Flavored GOOD OMEN COBRA🔥

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Highlights:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Blue Hard Anodized Components and Bright Pink Frame
  
• Custom Good Omen Cobra Etching by Julia Campione
  
• Blackened Deluxe Hardware
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way

Specifications:

• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA

Thanks and enjoy,
Mike & Cory

SOBA B&G Race Horse Shader

New Limited Run of B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Highlights:

• BLUE Anodized and Laser Etched Featherweight Aluminum Frame
  
• Swing Gate Vise guaranteed to lock tight
  
• Deluxe Black Hardware
  
• 8 Wrap 1" Custom Fish Scale Coils

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
  
• Weighs 5.4 oz
  

Made in the USA