Workhorse Tube Cleaning Brushes!

Clean tubes prior to sterilization with ease! New high quality heavy-duty stainless-steel brushes, available in three sizes to meet all your scrubbing needs!

• Small: 0.10" Diameter, 4" Overall Length
  
• Medium: 0.25" Diameter, 10" Overall Length
  
• Large: 0.40" Diameter, 6" Overall Length

Hustle Butter Tattoo Aftercare Wrap, 7.9 IN X 8.8 YDS

Hustle Butter Tattoo Aftercare Wrap is FINALLY HERE. Artists, this is for you. This expertly-designed protective wrap is the PERFECT addition to your station. Use this professional grade tattoo aftercare wrap to keep the newly tattooed area clean, promoting a healthy environment for your masterpiece. This ensures a more convenient heal for your client, as our wrap helps form an effective barrier to contain weeping from the new tattoo. Be sure to instruct your client on how to use this easy-to-remove wrap and advise on the timeline per application.  

Hustle Butter Tattoo Aftercare Wrap is a VITAL STEP in your post-process regimen. With almost 9 yards of wrap, you will be covered for tattoos of all shapes and sizes. Our cleverly designed box allows you to measure and cut only what you need, while keeping the rest of the unused roll sanitary. Your art deserves to look its best today, tomorrow, forever, and starting off with the right wrap sets your client on the journey to fresh-looking artwork for life. So, what are you waiting for?

Before First Use:

1. Upon receiving the box, be prepared with two sets of clean, unused gloves.
2. Put on the first set and carefully tear the perforated strip in the center of the box. Remove the plastic surrounding the wrap inside the box.
3. With a new set of clean gloves (be sure to change once you are touching the wrap itself) remove the colored tape and put the wrap back inside the box.
4. Thread the wrap through the perforated slit.

How To Use:

1. Before application, with clean gloves, clean, rinse and dry the tattoo area thoroughly. Be sure there is no remaining soap, ink or other residue before applying the wrap.
2. With a new set of clean gloves, measure the amount of wrap needed (unrolling the wrap as required) and cut accordingly. Be sure the film is measured to exceed the perimeter of the tattoo by 1.5 inches. If needed, more than one piece can be used to provide complete coverage.
3. Peel the film’s papers and gently apply the adhesive side to the area being protected. Using light pressure, smooth from the middle out to limit any air pockets.
4. Remove the film’s top layer.
5. To remove, peel film from the edges, using warm water in small amounts to help loosen as needed.

Please Note:

• If applying a wrap to the same area more than once, gently clean, rinse and pat dry the area between applications.
• Do not reuse the same piece of wrap, each application is designed for single use only.
• Do not wear any one piece of wrap for longer than 5 days. For larger pieces, it is recommended to change the wrap after the first 24 hours, depending on the level of seepage. It is normal for fluids to collect under the wrap as the tattoo heals. Always instruct your clients on the best course for their particular tattoo.
• If you recently got a tattoo and have any questions, it is always best to reach out to your artist for your unique instructions.

Warnings:

• Use only as directed.
• For external use only.
• May cause allergic reactions in persons with adhesive allergies. Discontinue use and consult a medical professional if reaction occurs.
• Only apply to clean, rinsed and dry skin and be sure to thoroughly wash off any residue prior to use. Product residue left on skin prior to application can cause a reaction with the adhesive.

Workhorse x Good Judy ECO Gripless Tubes

Traditional tube performance with a more environmentally conscious approach.

Developed in collaboration with Good Judy, these ECO Gripless Tubes are manufactured from compostable PLA, PBS, and mineral-based bioplastic and designed for use with reusable locking tattoo grips.

By separating the tube from the grip, artists can dramatically reduce waste while maintaining the feel, control, and precision of traditional tube and needle-on-bar tattooing. The system provides a familiar setup with the convenience of quick tube changes and reduced material waste.

Highlights

• Compostable PLA, PBS, and mineral-based bioplastic construction

• Designed for use with locking tattoo grips

• 20 Tubes Per Box

• Lightweight and precise

• Excellent needle stability and visibility

• Compatible with standard needle-on-bar setups

• Compatible with all major gripless tube locking grip systems

• Creates a completely traditional plastic-free tube and grip system when paired with reusable metal grips

• Made in collaboration with Good Judy

Available Configurations

Available in standard configurations for:

• Rounds

• Angled Rounds

• Diamonds

• Open Mags

• Closed Mags

Usage Information

For use with reusable locking grips.

Most artists will use a machine bag, pen cover, or barrier film over the grip, then apply grip wrap or cohesive bandage for comfort and control.

After use, reusable grips can be autoclaved, cold sterilized, or disinfected according to the manufacturer's recommendations. Tubes should be disposed of according to local regulations for tattoo waste. Industrial composting may be available in some municipalities, though acceptance of biohazard-related waste varies by location.

Why This System?

Developed with performance as the priority, these tubes were created to provide the stability, visibility, and control artists expect from traditional disposable tubes while reducing material waste.

When paired with reusable metal grips, the system eliminates traditional disposable plastic tube and grip waste while preserving the workflow many artists prefer.

Compostability / Biodegradability

Tubes

• CMA CG124 covered-in-vessel tested for decomposition in under 45 days

Packaging

• TÜV OK Compost Home Certified (TA8022105659)

• SGS PFAS (PFOA) Tested (TAOHG2000381701)

• Plastic-free

• Unbleached

• Compostable and recyclable

Packaging

The tubes are only part of the equation.

The packaging for these tubes is completely plastic-free, unbleached, PFAS-free, compostable, and recyclable, reflecting our shared commitment to reducing waste without compromising quality or performance.

Traditional tattooing. Modern eco-conscious thinking.

Please Note: Tubes are designed for use with locking grips. Grips sold separately.

Workhorse x Good Judy ECO Gripless Tubes

Traditional tube performance with a more environmentally conscious approach.

Developed in collaboration with Good Judy, these ECO Gripless Tubes are manufactured from compostable PLA, PBS, and mineral-based bioplastic and designed for use with reusable locking tattoo grips.

By separating the tube from the grip, artists can dramatically reduce waste while maintaining the feel, control, and precision of traditional tube and needle-on-bar tattooing. The system provides a familiar setup with the convenience of quick tube changes and reduced material waste.

Highlights

• Compostable PLA, PBS, and mineral-based bioplastic construction

• Designed for use with locking tattoo grips

• 20 Tubes Per Box

• Lightweight and precise

• Excellent needle stability and visibility

• Compatible with standard needle-on-bar setups

• Compatible with all major gripless tube locking grip systems

• Creates a completely traditional plastic-free tube and grip system when paired with reusable metal grips

• Made in collaboration with Good Judy

Available Configurations

Available in standard configurations for:

• Rounds

• Angled Rounds

• Diamonds

• Open Mags

• Closed Mags

Usage Information

For use with reusable locking grips.

Most artists will use a machine bag, pen cover, or barrier film over the grip, then apply grip wrap or cohesive bandage for comfort and control.

After use, reusable grips can be autoclaved, cold sterilized, or disinfected according to the manufacturer's recommendations. Tubes should be disposed of according to local regulations for tattoo waste. Industrial composting may be available in some municipalities, though acceptance of biohazard-related waste varies by location.

Why This System?

Developed with performance as the priority, these tubes were created to provide the stability, visibility, and control artists expect from traditional disposable tubes while reducing material waste.

When paired with reusable metal grips, the system eliminates traditional disposable plastic tube and grip waste while preserving the workflow many artists prefer.

Compostability / Biodegradability

Tubes

• CMA CG124 covered-in-vessel tested for decomposition in under 45 days

Packaging

• TÜV OK Compost Home Certified (TA8022105659)

• SGS PFAS (PFOA) Tested (TAOHG2000381701)

• Plastic-free

• Unbleached

• Compostable and recyclable

Packaging

The tubes are only part of the equation.

The packaging for these tubes is completely plastic-free, unbleached, PFAS-free, compostable, and recyclable, reflecting our shared commitment to reducing waste without compromising quality or performance.

Traditional tattooing. Modern eco-conscious thinking.

Please Note: Tubes are designed for use with locking grips. Grips sold separately.

Workhorse x Good Judy ECO Gripless Tubes

Traditional tube performance with a more environmentally conscious approach.

Developed in collaboration with Good Judy, these ECO Gripless Tubes are manufactured from compostable PLA, PBS, and mineral-based bioplastic and designed for use with reusable locking tattoo grips.

By separating the tube from the grip, artists can dramatically reduce waste while maintaining the feel, control, and precision of traditional tube and needle-on-bar tattooing. The system provides a familiar setup with the convenience of quick tube changes and reduced material waste.

Highlights

• Compostable PLA, PBS, and mineral-based bioplastic construction

• Designed for use with locking tattoo grips

• 20 Tubes Per Box

• Lightweight and precise

• Excellent needle stability and visibility

• Compatible with standard needle-on-bar setups

• Compatible with all major gripless tube locking grip systems

• Creates a completely traditional plastic-free tube and grip system when paired with reusable metal grips

• Made in collaboration with Good Judy

Available Configurations

Available in standard configurations for:

• Rounds

• Angled Rounds

• Diamonds

• Open Mags

• Closed Mags

Usage Information

For use with reusable locking grips.

Most artists will use a machine bag, pen cover, or barrier film over the grip, then apply grip wrap or cohesive bandage for comfort and control.

After use, reusable grips can be autoclaved, cold sterilized, or disinfected according to the manufacturer's recommendations. Tubes should be disposed of according to local regulations for tattoo waste. Industrial composting may be available in some municipalities, though acceptance of biohazard-related waste varies by location.

Why This System?

Developed with performance as the priority, these tubes were created to provide the stability, visibility, and control artists expect from traditional disposable tubes while reducing material waste.

When paired with reusable metal grips, the system eliminates traditional disposable plastic tube and grip waste while preserving the workflow many artists prefer.

Compostability / Biodegradability

Tubes

• CMA CG124 covered-in-vessel tested for decomposition in under 45 days

Packaging

• TÜV OK Compost Home Certified (TA8022105659)

• SGS PFAS (PFOA) Tested (TAOHG2000381701)

• Plastic-free

• Unbleached

• Compostable and recyclable

Packaging

The tubes are only part of the equation.

The packaging for these tubes is completely plastic-free, unbleached, PFAS-free, compostable, and recyclable, reflecting our shared commitment to reducing waste without compromising quality or performance.

Traditional tattooing. Modern eco-conscious thinking.

Please Note: Tubes are designed for use with locking grips. Grips sold separately.

Workhorse x Good Judy ECO Gripless Tubes

Traditional tube performance with a more environmentally conscious approach.

Developed in collaboration with Good Judy, these ECO Gripless Tubes are manufactured from compostable PLA, PBS, and mineral-based bioplastic and designed for use with reusable locking tattoo grips.

By separating the tube from the grip, artists can dramatically reduce waste while maintaining the feel, control, and precision of traditional tube and needle-on-bar tattooing. The system provides a familiar setup with the convenience of quick tube changes and reduced material waste.

Highlights

• Compostable PLA, PBS, and mineral-based bioplastic construction

• Designed for use with locking tattoo grips

• 20 Tubes Per Box

• Lightweight and precise

• Excellent needle stability and visibility

• Compatible with standard needle-on-bar setups

• Compatible with all major gripless tube locking grip systems

• Creates a completely traditional plastic-free tube and grip system when paired with reusable metal grips

• Made in collaboration with Good Judy

Available Configurations

Available in standard configurations for:

• Rounds

• Angled Rounds

• Diamonds

• Open Mags

• Closed Mags

Usage Information

For use with reusable locking grips.

Most artists will use a machine bag, pen cover, or barrier film over the grip, then apply grip wrap or cohesive bandage for comfort and control.

After use, reusable grips can be autoclaved, cold sterilized, or disinfected according to the manufacturer's recommendations. Tubes should be disposed of according to local regulations for tattoo waste. Industrial composting may be available in some municipalities, though acceptance of biohazard-related waste varies by location.

Why This System?

Developed with performance as the priority, these tubes were created to provide the stability, visibility, and control artists expect from traditional disposable tubes while reducing material waste.

When paired with reusable metal grips, the system eliminates traditional disposable plastic tube and grip waste while preserving the workflow many artists prefer.

Compostability / Biodegradability

Tubes

• CMA CG124 covered-in-vessel tested for decomposition in under 45 days

Packaging

• TÜV OK Compost Home Certified (TA8022105659)

• SGS PFAS (PFOA) Tested (TAOHG2000381701)

• Plastic-free

• Unbleached

• Compostable and recyclable

Packaging

The tubes are only part of the equation.

The packaging for these tubes is completely plastic-free, unbleached, PFAS-free, compostable, and recyclable, reflecting our shared commitment to reducing waste without compromising quality or performance.

Traditional tattooing. Modern eco-conscious thinking.

Please Note: Tubes are designed for use with locking grips. Grips sold separately.

Workhorse x Good Judy ECO Gripless Tubes

Traditional tube performance with a more environmentally conscious approach.

Developed in collaboration with Good Judy, these ECO Gripless Tubes are manufactured from compostable PLA, PBS, and mineral-based bioplastic and designed for use with reusable locking tattoo grips.

By separating the tube from the grip, artists can dramatically reduce waste while maintaining the feel, control, and precision of traditional tube and needle-on-bar tattooing. The system provides a familiar setup with the convenience of quick tube changes and reduced material waste.

Highlights

• Compostable PLA, PBS, and mineral-based bioplastic construction

• Designed for use with locking tattoo grips

• 20 Tubes Per Box

• Lightweight and precise

• Excellent needle stability and visibility

• Compatible with standard needle-on-bar setups

• Compatible with all major gripless tube locking grip systems

• Creates a completely traditional plastic-free tube and grip system when paired with reusable metal grips

• Made in collaboration with Good Judy

Available Configurations

Available in standard configurations for:

• Rounds

• Angled Rounds

• Diamonds

• Open Mags

• Closed Mags

Usage Information

For use with reusable locking grips.

Most artists will use a machine bag, pen cover, or barrier film over the grip, then apply grip wrap or cohesive bandage for comfort and control.

After use, reusable grips can be autoclaved, cold sterilized, or disinfected according to the manufacturer's recommendations. Tubes should be disposed of according to local regulations for tattoo waste. Industrial composting may be available in some municipalities, though acceptance of biohazard-related waste varies by location.

Why This System?

Developed with performance as the priority, these tubes were created to provide the stability, visibility, and control artists expect from traditional disposable tubes while reducing material waste.

When paired with reusable metal grips, the system eliminates traditional disposable plastic tube and grip waste while preserving the workflow many artists prefer.

Compostability / Biodegradability

Tubes

• CMA CG124 covered-in-vessel tested for decomposition in under 45 days

Packaging

• TÜV OK Compost Home Certified (TA8022105659)

• SGS PFAS (PFOA) Tested (TAOHG2000381701)

• Plastic-free

• Unbleached

• Compostable and recyclable

Packaging

The tubes are only part of the equation.

The packaging for these tubes is completely plastic-free, unbleached, PFAS-free, compostable, and recyclable, reflecting our shared commitment to reducing waste without compromising quality or performance.

Traditional tattooing. Modern eco-conscious thinking.

Please Note: Tubes are designed for use with locking grips. Grips sold separately.

Workhorse x Good Judy ECO Gripless Tube Sample Pack

New to gripless tubes? This is a great place to start.

Developed in collaboration with Good Judy, these ECO Gripless Tubes are manufactured from compostable PLA, PBS, and mineral-based bioplastic and designed for use with reusable locking tattoo grips.

By separating the tube from the grip, artists can dramatically reduce waste while maintaining the feel, control, and precision of traditional tube and needle-on-bar tattooing. This sample pack provides a practical way to experience the system across some of the most commonly used tube configurations.

Sample pack includes

• 5 x 7 Round Tubes

• 5 x 9 Diamond Tubes

• 5 x 7 Closed Mag Tubes

• 5 x 9 Open Mag Tubes

20 Tubes Total

Highlights

• Compostable PLA, PBS, and mineral-based bioplastic construction

• Designed for use with locking tattoo grips

• 20 tubes per pack (5 of each style)

• Lightweight and precise

• Excellent needle stability and visibility

• Compatible with standard needle-on-bar setups

• Compatible with all major gripless tube locking grip systems

• Creates a completely traditional plastic-free tube and grip system when paired with reusable metal grips

• Made in collaboration with Good Judy

Usage information

For use with reusable locking grips.

Most artists will use a machine bag, pen cover, or barrier film over the grip, then apply grip wrap or cohesive bandage for comfort and control.

After use, reusable grips can be autoclaved, cold sterilized, or disinfected according to the manufacturer's recommendations. Tubes should be disposed of according to local regulations for tattoo waste. Industrial composting may be available in some municipalities, though acceptance of biohazard-related waste varies by location.

Why this system?

Developed with performance as the priority, these tubes were created to provide the stability, visibility, and control artists expect from traditional disposable tubes while reducing material waste.

When paired with reusable metal grips, the system eliminates traditional disposable plastic tube and grip waste while preserving the workflow many artists prefer.

Compostability / biodegradability

Tubes

• CMA CG124 covered-in-vessel tested for decomposition in under 45 days

Packaging

• TÜV OK Compost Home Certified (TA8022105659)

• SGS PFAS (PFOA) Tested (TAOHG2000381701)

• Plastic-free

• Unbleached

• Compostable and recyclable

Packaging

The tubes are only part of the equation.

The packaging for these tubes is completely plastic-free, unbleached, PFAS-free, compostable, and recyclable, reflecting our shared commitment to reducing waste without compromising quality or performance.

Traditional tattooing. Modern eco-conscious thinking.

Please Note: Tubes are designed for use with locking grips. Grips sold separately.

Workhorse x Good Judy Single Lock Grip

Developed for use with the Workhorse x Good Judy ECO Gripless Tube system, this reusable 1" stainless steel grip combines traditional tube feel with a simple, lightweight, and dependable locking design.

The single locking mechanism securely holds the tube while allowing for quick setup and easy adjustment.

Machined from stainless steel and built for years of daily use, these grips provide a clean, stable platform for artists looking to reduce waste without sacrificing performance.

Compatible with Workhorse x Good Judy ECO Gripless Tubes as well as virtually all major gripless tube systems.

Highlights:

• True 1" Grip Diameter
• Stainless Steel Construction
• Single-Locking Design
• Secure Tube Retention with Easy Adjustment
• Lightweight and Durable
• Compatible with All Major Gripless Tube Systems
• Compatible with Workhorse x Good Judy ECO Gripless Tubes
• Reusable and Autoclavable
• Suitable for Cold Sterilization Methods
• Built for Years of Daily Use

Pair with a machine bag or barrier film and your preferred grip wrap for a clean, comfortable, and environmentally responsible setup.

Built to last. Built to work.

High Point Super Lock Grip

Developed by Jeremy Eikenberry (@jeremyeik) and Hunter Cross (@hubtattoos), the High Point Super Lock Grip combines the weight, balance, and feel of a traditional metal tube setup with the convenience and versatility of modern gripless tubes.

Featuring a solid 1" brass grip, the dual-locking design secures the tube at both ends, creating an exceptionally stable setup with minimal movement or sway.

Machined from solid brass, these grips naturally help absorb vibration while providing a balanced feel in the hand. Many artists find reduced vibration and improved stability contribute to greater comfort, control, and consistency throughout long tattoo sessions.

Compatible with Workhorse x Good Judy ECO Gripless Tubes as well as virtually all major gripless tube systems.

Highlights:

• True 1" Grip Diameter
• Solid Brass Construction
• Dual-Locking Mechanism Secures Tube at Both Ends
• Exceptional Tube Stability with Minimal Movement or Sway
• Naturally Helps Absorb Vibration
• Balanced Feel for Comfort and Control
• Compatible with All Major Gripless Tube Systems
• Compatible with Workhorse x Good Judy ECO Gripless Tubes
• Reusable and Autoclavable
• Suitable for Cold Sterilization Methods
• Built for Years of Daily Use

Pair with a machine bag or barrier film and your preferred grip wrap for a clean, comfortable setup.

Built to last. Built to work.

Workhorse x Good Judy Double Lock Ergo Grip

Developed for use with the Workhorse x Good Judy ECO Gripless Tube system, this reusable 1" stainless steel grip combines traditional tube feel with a simple, lightweight, and dependable locking design.

Machined from stainless steel and built for years of daily use, these grips provide a clean, stable platform for artists looking to reduce waste without sacrificing performance.

Compatible with Workhorse x Good Judy ECO Gripless Tubes as well as virtually all major gripless tube systems.

Highlights:

• True 1" Grip Diameter
• Stainless Steel Construction
•  Dual-Locking Mechanism Secures Tube at Both Ends
• Secure Tube Retention with Easy Adjustment
• Lightweight and Durable
• Compatible with All Major Gripless Tube Systems
• Compatible with Workhorse x Good Judy ECO Gripless Tubes
• Reusable and Autoclavable
• Suitable for Cold Sterilization Methods
• Built for Years of Daily Use

Pair with a machine bag or barrier film and your preferred grip wrap for a clean, comfortable, and environmentally responsible setup.

Built to last. Built to work.