Lime Green - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years. If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

Dan Kubin V3/24 Sidewinder!

Highlights:

• Verdigris Patina Plated Brass Frame with matching Verdigris Motor Cover (*Finish may vary)
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar:
  • Needle Bar Tensioner - when setting up your needle and tube, position needle tensioner in desired position depending on the amount of tension you want to add to the needle bar. Adjust position by loosening the thumbscrew and then tightening when you reach desired tension. 
  • Rubber Band alternative setup - Loosen / remove thumbscrew to take the needle tensioner off. Then when setting up the machine, wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples. 
    
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Description:

The most significant update to the V3/24 Sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

Aside from the added Needle Bar Tensioner, this new version of remastered V3 Sidewinder is dialed in and updated with various improvements to increase machine longevity and consistency. 

The V3/24 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Limited Edition Juan Puente OG Liner Machine Kit

Kit includes all parts needed to build a great tattoo machine... but it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Juan Puente Frame
• Blackened Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 6 Wrap Custom Soldered Coils
• Liner Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Speed with a Solid Hit
• 140-145 Hz at 6.5 V Unloaded
• Pushing 3-11's Easy
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Black Friday x Black November Workhorse Model 6 Liner Kits! 

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• SPECS:

  • Full Size Frame milled in house from a solid block of Ductile Iron
  • HD Flat Black Powder Coat Finish
  • Deluxe Workhorse Hardware with Black Oxide Finish
  • Swing Gate Steel Vise
  • Custom 8 Wrap 1" Coils with 1/4" Steel Yoke 
  • High End Specialty Steel Springs
  • Solid Copper Contact with Allen Key Insert
  • Reverse Rear Binder Setup with frame ground on coil deck
  • Long Stroke with a solid hit great for 5s to 14s
    
  • Medium Speed, running around 135-140 unloaded @ 6.5 Volts
  • 6.5 Ounce Weight
  • Made in the USA

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Ozer Wireless Quick Stencil Printer

Limited Deluxe Chris Smith Carnivore Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Aluminum Carnivore Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1.125" 6 Wrap Custom Soldered Coils
• 1/8" Yoke
• 2 Liner Armature Bar Options
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
  

Typical Liner Specs:

• Pushes 5’s to 11’s Easy
• Running Slower and Harder
• 130-135Hz at 6.5 V unloaded
• Weighs 5.5 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find them here in our Tool Category

Made in the USA

Lilac - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years. If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

Medium Blue - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years. If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

Workhorse Aprons done in Collaboration with Sidnaw Company (formerly Mercy Supply)

Handcrafted locally by renowned artisan Rusty Zylstra, these Workhorse exclusives are designed specifically for use in tattooing with features not found amongst other products offered by Mercy Supply.

Apron Details:
- Extra long cut with a wider bottom to ensure your legs stay covered when seated
- 10 oz waxed canvas made in the USA and strong enough to withstand disinfectant sprays and wipes
- Double bottom upper chest pockets to hold your phone and drawing utensils...no lower pockets to get in the way, bunch up, or catch disease
- Hand hammered solid copper rivets
- 5 oz durable, adjustable leather straps that fastens on the side like a belt would
– excess strap can be tucked back in behind the brass buckle
- Solid brass buckles
- Finished with leather trim around all edges

*DO NOT PUT IN WASHING MACHINE, DO NOT DRY CLEAN, SPOT CLEAN ONLY.