The Mixed Spring Set. Includes:

• 16 Rears (4- Short .018", 4- Long .018", 4- Short .02", 4- Long .02") 
• 18 Fronts - (3- Short .018", 6- Medium .018", 3- Long .018", 2- Short .02", 2- Medium .02", 2- Long .02") Total of 34 individual springs.

 The 18 Gauge Set Includes:

• 16 Rears (8- Short .018", 8- Long .018") 
• 16 Fronts (4- Short .018", 8- Medium .018", 4- Long .018") Total of 32 individual springs. 

**18's and 20's now come with a front hole punched in the rear spring and a slotted rear hole for a universal fit**

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Polished Raw Brass Frame (for earned natural patina it will gain over time and use) plus Blackened Hardware
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin. Also good for shading and color blends if you adjust your stroke and voltage.
  
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

KN95 Face Mask (Sealed Packs of 20)

• Active carbon high-filtration mask with 5 layers
• Up To 50 Times Protection Against Non-Toxic Dusts, Fibres & Aqueous Mists
• High filtration efficiency and low breathing resistance
• Adjustable nose clip
• Easy To Store Due To Fold Flat design

*Not intended for medical use. So please, DO NOT purchase face masks with the false understanding they are 100% effective preventing infection from the Coronavirus. They are more about protecting others to reduce spread.

**Due to the personal hygiene nature of the product, face masks are non-returnable.

COVID-19 UPDATES:

• We are shipping daily and have now expanded our requirements to include Medical Professionals. We still do not sell to at home tattooers but gladly sell to any medical professionals that need supplies. You are top priority, thank you for all you do!

• Based on the guidelines from the Centers for Disease Control, we are taking all measures to ensure there is no contamination of our packages.
  
• Due to the ongoing pandemic, manufacturers have drastically increased the cost of all PPE, masks included. We are working hard to keep these costs down, keep PPE in stock, and find other sources to provide better options with better pricing.

Pack of 25 - Available in 10 Shims or 5 Shims

New V4 Adam Ciferri Ghost Dog Liner!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Standard Workhorse Red Oxide Finish
• Standard Workhorse Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Workhorse Alignment Tool!

Designed by SOBA, this is the best tool possible to perfectly align your abar with your tube vise and coils, plus turn it sideways and it features a slot you can slide your abar into to tweak it if your frame is a little out of whack.

- 5/16" x 3.5" Stainless Bar
- Knurled Grip
- Armature Bar Nipple Slot on the top for alignment use
- Armature Bar Groove in side for tweaking / turning your abar if necessary....we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.
- A must have for machine building and machine repair
- Skills not included, sorry

*machine obviously not included

Joshua Bowers High-Jack

The High-Jack attaches to your workstation magnetically and plugs in to the "machine" port on your power supply effectively moving your clipcord jack 5 feet into the air. This is the ideal position for your clipcord to hang from to keep it off the floor and free from rubbing, tugging, and snagging as you work.

• No more rolling over your cord with your chair
• Keep your cord off the floor
• Reduces the weight hanging off the back of the machine
• Reduces tugs and snags as you tattoo
• Extends the life of your clipcord

A few words from Joshua about The High-Jack:

"The High-Jack is a product I developed to make my clipcord drape and move more easily. The High-Jack magnetically attaches to your work station and plugs in to the Machine port on your power supply. Your clip cord then plugs in to the High-Jack, effectively lifting the clipcord jack 5 feet in to the air. This allows the cord to drape naturally from above you, doesn’t rub on the floor, doesn’t snag across your lap and it takes weight off of the back of the machine easing hand fatigue greatly.

The High-Jack Switch has all the great features of the basic High-Jack with the great new feature of having a switch box at the end to be able to toggle back and forth between two cords. This is a great feature for people using multiple cord types or just want two cords connected so they don’t have to switch cords back and forth. The toggle move from side to side selecting which cord is powered with off in the middle, so you can run on constant and turn your machine off at the High-Jack.

I have been using this product for over a year now, along with the rest of my shop. We were originally just testing them out but I speak for me and the rest of the shop when I say that we can’t imagine tattooing without them now."

ReproFX Spirit™ Thermal Tattoo Transfer Papers are made for the professional artist from the highest quality materials to create the highest visibility purple dyes and best ripstop stencil sheets in the world.

• Compatible with all thermal printers
• Consistant, high quality images
• Skin safe & shelf-stable

Manufactured in the United States since 1948.

Al Brodeur Workhorse RCA/Clip Cord Adapter

- LIFETIME WARRANTY: if you ever have trouble send it in for repair or replacement
- Cords are 16 gauge, oxygen free, super flexible
- Braided wire for strength
- Jacks are sealed, high quality, internally locking so the cord won't come loose
- Copper lug ends for better current flow
- Very low voltage loss
- Machines run smoother and at lower voltage
- Super secret spring mechanism that regains tension when heated
- Combo comes with an Al Brodeur 6ft Straight Plug RCA Cord and an Al Brodeur RCA/Clip Cord Adapter
- Return shipping costs are not included with the warranty
- MADE IN THE USA

These are literally the best cords in the world.

Paper Surgical Tape

- 12 Rolls, 1" x 10 yards
- Provides maximum breath-ability decreasing risk of skin compromise
- Superior adhesion
- Easy to apply, tears off easily
- Hypoallergenic
- Latex Free

Bottle Bags (Box of 500)
6" x 8" Poly Bag

Each Spring Set includes: Fully punched front and rear springs.

Liner - Zephyr Liner, Cory Rogers Liner, Cracker Liner

Liner Short Rear- Rex Liner

Shader Short Rear- Cory Rogers Shader, Rex Shader

Shader Long Rear- Zephyr Shader, Cracker ShaderStainless Steel Liner Forked Rear- Speedballer Liner   

                                               

Vitamin A&D Ointment Available in Foil Packs

- 1 Box of Foil Packs, 5-Gram, 144-Count. $11
- 1 Case, 6 boxes of Foils Packs, 5-Gram, 864 Count. $54

The First and Only USDA Certified Petroleum Replacement developed for specifically for Tattoo artists and Collectors. Lubricant, Barrier and Aftercare all in one. Looks and feels like Petroleum based products, but is 100% Natural!

For use DURING and AFTER a tattoo. DURING- Use during the tattoo to soothe and replace petroleum based products. AFTER- Wash hands before use. Gently massage evenly into tattoo. Apply a small amount 2-3 times daily.

We offer two convenient sizes - 6 oz size for use while tattooing as well as a 1/4 oz sample size, great to give to customers for aftercare so you can ensure your work is well taken care of and heals out as it should.

Dental Barrier Film

Eliminates cross contamination while working with handheld equipment.
- Covers most surface areas.
- Apply to almost any surface without worrying about leaving sticky residues behind
- Provides all-purpose cleanliness by protecting difficult-to-clean areas
- Comes in a 4"×6" perforated roll
- Tear off single or multiple sheets as needed