Limited Deluxe Chris Smith Carnivore Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Aluminum Carnivore Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1.125" 6 Wrap Custom Soldered Coils
• 1/8" Yoke
• 2 Liner Armature Bar Options
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
  

Typical Liner Specs:

• Pushes 5’s to 11’s Easy
• Running Slower and Harder
• 130-135Hz at 6.5 V unloaded
• Weighs 5.5 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find them here in our Tool Category

Made in the USA

Chris Smith Carnivore Liner

Highlights:

• CNC Cut Iron Frame with Standard Red Oxide Finish
  
• Deluxe Blackened Hardware, Spring Saddle, and Over-sized Thumbscrew
  
• 6 Wrap 1.25” Coils
  

Specifications:

• Pushes 5’s to 11’s Easy
  
• Running Slower and Harder
  
• 130-135Hz at 6.5 V unloaded
  

Made in the USA

Chris Smith Supreme Liner! 

Built with an aluminum upright and ass end with a steel base/vise, this half and half machine is lightweight, well-balanced, and built for all day everyday tattoos.

Highlights:

• CNC Cut Aluminum Frame
• Steel Base and Vise Inlaid into the Aluminum Frame
• Deluxe Blackened Steel Hardware, Spring Saddle, and Clip Cord Yoke Screw
  
• 6 Wrap 1.25” Tape Coils with Oversized Cap
  

Specifications:

• Pushes 5’s to 14’s Easy
• Long Stroke, Medium Speed with a Heavy Hit
  
• 130-135 Hz at 6.5 V unloaded
• Weighs a mere 5.6 oz
  

Made in the USA

Chris Smith Hater Liner

Highlights:

• CNC Cut Iron Frame with Standard Red Oxide Finish
  
• Deluxe Blackened Hardware, Spring Saddle, and Over-sized Thumbscrew
  
• 8 Wrap 1” Coils

Specifications:

• Pushes 5’s to 11’s Easy
  
• Medium Speed with a Medium Hard Hit
  
• 130-135 Hz at 6.5 V unloaded
  
• Weighs 6 oz 
  

Made in the USA

New Chris Smith Streamliner Shader

Highlights:

• Meticulously CNC Machined Classic Streamliner Frame
  
• Double Slit Collet Vise with Welded Wingnut Thumbscrew
  
• Standard Workhorse Red Oxide Finish 
  
• Standard Workhorse Hardware 
  
• Full Size 1.25" 8 Wrap Custom Black Heat Shrink Coils

Specifications:

• Medium Speed with a Hard Hit and Long Throw
  
• Running 95-100 Hz @ 7.5-8 Volts Unloaded
  
• Great for Traditional Work and Solid Color Shading
  
• Pushes 5's-13s Easy
  
• Weighs 7.2 oz
  

Made in the USA

Limited Chris Smith Supreme Liner - Black x Black

Highlights:

• Black CNC Cut Aluminum Frame
• Black Steel Base and Vise Inlaid into the Aluminum Frame
• Deluxe Blackened Steel Hardware, Spring Saddle, and Clip Cord Yoke Screw
  
• 6 Wrap 1.25” Tape Coils with Oversized Cap
  

Specifications:

• Pushes 5’s to 14’s Easy
• Long Stroke, Medium Speed with a Heavy Hit
  
• 130-135 Hz at 6.5 V unloaded
• Weighing in at a mere 5.6 oz
  

Made in the USA

Limited Deluxe Chris Smith Carnivore Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Carnivore Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1.25" 6 Wrap Custom Soldered Coils
• 2 Liner Armature Bar Options
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
  

Typical Liner Specs:

• Pushes 5’s to 11’s Easy
• Running Slower and Harder
• 130-135Hz at 6.5 V unloaded
• Weighs 6.8 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find them here in our Tool Category

Made in the USA

Limited Deluxe Chris Smith Hater Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Carnivore Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils
• 2 Liner Armature Bar Options
• 2 Liner Armature Bar Options
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 5.6 oz

Typical Liner Specs:

• Pushes 5’s to 11’s Easy
• Long Stroke, Medium Speed with a Heavy Hit
  
• 130-135 Hz at 6.5 V unloaded

*Comes without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find it here in our Tool Category

Made in the USA

Limited Deluxe Chris Smith Supreme Liner Kit!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Aluminum Frame
• Steel Base and Vise Inlaid into the Aluminum Frame
• Deluxe Blackened Steel Hardware, Spring Saddle, and Clip Cord Yoke Screw
  
• 6 Wrap 1.25” Soldered Coils
  
• Liner Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 5.6 oz

Typical Liner Specs:

• Pushes 5’s to 14’s Easy
• Long Stroke, Medium Speed with a Heavy Hit
  
• 130-135 Hz at 6.5 V unloaded

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find them here in our Tool Category

Made in the USA