BLACK FRIDAY X BLACK NOVEMBER Eddy Deutsche Blade Runner! Special edition run of machines at special pricing!

Eddy Deutsche Blade Runner Liner!

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Black Long Nipple A Bar
  
• Custom HD Baby Blue Powder Coat
  
• Deluxe Blackened Hardware plus pure Matching Dice Copper Contact
• Custom Hand Wound 8 Wrap Natural Phenolic Coils

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running around 130-135 Hz Unloaded at 6.5V
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
  
• Weighs about 7 oz

Made in the USA

 BLACK FRIDAY X BLACK NOVEMBER Workhorse Model 6 Shader! Special edition run of machines at special pricing!

Workhorse Model 6 Shader - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• HD Blue x Purple Powder Coat Faded Iron Frame 
• Deluxe 24K Gold Plated Hardware
• Matching 24k Gold Plated Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Gold Plated Silver Contact Screw w/ Matching Dice 
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 15s
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

 BLACK FRIDAY X BLACK NOVEMBER Workhorse Model 6 Liner! Special edition run of machines at special pricing!

Workhorse Model 6 Liner - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Blue x Purple
• Deluxe 24K Gold Plated Hardware
• Matching 24k Gold Plated Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Gold Plated Silver Contact Screw w/ Matching Dice 
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

Black Friday x Black November SOBA V2 Mini Clipper Liner! Special edition run of machines at special pricing!

Limited Edition Purple x Purple x Ugly Green!

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

Highlights:

• CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
  
• Anodized Satin Galactic Purple Finish PLUS Lilac + Ugly Green HD Powder Coat
• Heavy Weight Brass Vise and Thumbscrew with a Flat Black Powder Coated Finish
  
• Deluxe Steel Hardware plus Custom Blackened Steel Drop Down Rear Binder 
  
• 1" 8 Wrap Custom Coils with Matching Etched Ugly Green Powder Coated Foil 

Specifications:

• Great for Medium to Large Groupings
  
• Medium Speed with a Hard Hit 
  
• Pushing 5's to 14's All Day
  
• Running 130-135 Hz @ 6.5 V Unloaded
  
• Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
  

Made in the USA

Black Friday x Black November Adam Ciferri Tetris Shader! Special edition run of machines at special pricing!

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• Custom Gold Green Textured Powder Coat Finish
• Matching Steel Swing Gate Vise
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's... also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Weighs 6.5 oz
  

Made in the USA

Black Friday x Black November Adam Ciferri Tetris Liner! Special edition run of machines at special pricing!

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame 
• Custom Gold Green Textured Powder Coat Finish
• Matching Steel Swing Gate Vise
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Medium speed with enough power to push 3's to 14's no problem
• Tuned for all-day, every-day street shop and/or custom tattooing
• Runs about 130 Hz @ 6.5 Volts Unloaded, crank up to 7-8 Volts for large groupings
  
• 6.5 oz weight
  

Made in the USA

 BLACK FRIDAY X BLACK NOVEMBER Workhorse Model 6 Shader! Special edition run of machines at special pricing!

Workhorse Model 6 Shader - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Polished Nickel Frame
• Deluxe Nickel Workhorse Hardware
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Silver Contact Screw
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 15s
  
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA
  

 BLACK FRIDAY X BLACK NOVEMBER Workhorse Model 6 Liner! Special edition run of machines at special pricing!

Workhorse Model 6 Liner - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Polished Nickel Frame
• Deluxe Nickel Workhorse Hardware
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Silver Contact Screw
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

 BLACK FRIDAY X BLACK NOVEMBER V3/23 Sidewinder in Pink! Special edition run of machines at special pricing!

We found a small Batch of V3/23 Sidewinders and built them up with the updated V3/24 Needle Bar Tensioner and V3/24 armature and components. Slightly less hit than the V3/24, but still great for small to medium groupings. 

Machine Specs:

• HD Pink Powder Coated Brass Frame with Black Hardware
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

**The most significant update to this sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

BLACK FRIDAY x BLACK NOVEMBER Joshua Bowers SC Bobber with Olive Sparkle Finish! Special edition run of machines at special pricing!

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Sparkle Gold Dark Olive Powder Coat Finish
  
• Matching Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

Black Friday x Black November Seth Ciferri Distressed Black Mini-Fastback Liner! Special edition run of machines at special pricing!

Highlights:

• CNC Cut ALUMINUM Mini-Flatside Liner Frame
  
• DISTRESSED Black Anodized Finish
  
• Deluxe Blackened Hardware
  
• Forward Facing Guillotine Vise, Great for Right or Left Handed Use
  
• 1" 8 Wrap Heat Shrink Coils
  

Specifications:

• Medium/Slow Speed with a Heavy Hit
  
• Running 125 Hz @ 6 V Unloaded For Steady Single-Pass Heavy Lines
  
• Pushing 5's to 11's Easy, turn up for 14s depending how you tattoo
  
• Weighing in at 5.3 oz

Made in the USA

A few words From Seth about this machine: 
"Woooooo damn these little dudes hit HARD. Weighing a mere 5.3 oz and CNC cut from a solid block of aluminum, they’re built to push the big stuff, from 7 on up. The common shortcomings of aluminum frames have been eliminated, with a steel insert at the clipcord connection, and beefy side plate with nice smooth radii where it meets the base and spring shelf, making this frame just as stiff as iron. 8 layer shorty coils stay nice and cool while pushing those baggy 18 liners all damn day. The guillotine style vise with hold any tube, steel or plastic."

BLACK FRIDAY X BLACK NOVEMBER Ghost Dog Shader! Special edition run of machines at special pricing!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Custom Fractured Red Powder Coat Finish
• Deluxe 24K Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Ghost Dog Liner! Special edition run of machines at special pricing!

Limited Sparkle Red x Gold

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Custom Keg Coil
• Custom Fractured Red Powder Coat Finish
• Deluxe 24K Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Cory Rogers Cracker Liner! Special edition run of machines at special pricing!

Highlights:

• CNC Cut Iron Cracker Liner Frame with Lightened / Drilled out Upright
• Custom Slide Vise with Inlaid Insert 
• Multicolored Powder Coat Finish
• Blackened Workhorse Hardware PLUS Custom Dice Contact
  
• 8 Wrap 1" Custom Coils

Specifications:

• Medium Speed with a Hard Hit
• Great Liner for Traditional Work
• 130-135 Hz. @ 6 V unloaded
• Pushes 5s to 11s with Ease
  

Made in the USA

Black Friday x Black November Adam Ciferri Tetris Shader! Special edition run of machines at special pricing!

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's... also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Weighs 6.5 oz
  

Made in the USA