BLACK FRIDAY Joshua Bowers Micro-Liner - Red x Nickel
Regular price$350.00 USD
BLACK FRIDAY × BLACK NOVEMBER 2026 SPECIAL RELEASE!
Part of our annual BLACK NOVEMBER sale, this special edition machine is available in a limited run at exclusive pricing. Check out our full BLACK NOVEMBER collection for more special releases every Friday throughout November!
Highlights:
3 Piece Bolt-Up Body
Blackened Steel Vise and Spring Shelf
Anodized Red Aluminum Body
Deluxe Nickel Plated Hardware
Weighing in at a mere 2.95 oz!
Runs best between 6-7 Volts
Pushes any grouping with ease
Specifications:
Runs best between 6-7 Volts
Pushes any grouping with ease
Made in the USA
A few words from Joshua about this machine:
"This machine is designed, built and tuned to run like a coil machine. The tuning is in the frame geometry and setup so there's no knobs or settings to fall out of adjustment. Ready to tattoo out of the box. Light, but not too light. Very punchy and snappy on the tip of the stroke and backs off slightly in the middle of the stroke. Great for sculpting fine finesse lines ran off the needle tips and also great for burying a large grouping liner and pulling a solid single pass line quickly." Joshua Bowers Micro Liner Care Instructions
BLACK FRIDAY Joshua Bowers Micro-Liner - Red x Brass
Regular price$350.00 USD
BLACK FRIDAY × BLACK NOVEMBER 2026 SPECIAL RELEASE!
Part of our annual BLACK NOVEMBER sale, this special edition machine is available in a limited run at exclusive pricing. Check out our full BLACK NOVEMBER collection for more special releases every Friday throughout November!
Highlights:
3 Piece Bolt-Up Body
Blackened Steel Vise and Spring Shelf
Anodized Red Aluminum Body
Deluxe BRASS Hardware
Weighing in at a mere 2.95 oz!
Runs best between 6-7 Volts
Pushes any grouping with ease
Specifications:
Runs best between 6-7 Volts
Pushes any grouping with ease
Made in the USA
A few words from Joshua about this machine:
"This machine is designed, built and tuned to run like a coil machine. The tuning is in the frame geometry and setup so there's no knobs or settings to fall out of adjustment. Ready to tattoo out of the box. Light, but not too light. Very punchy and snappy on the tip of the stroke and backs off slightly in the middle of the stroke. Great for sculpting fine finesse lines ran off the needle tips and also great for burying a large grouping liner and pulling a solid single pass line quickly." Joshua Bowers Micro Liner Care Instructions
BLACK FRIDAY x Joshua Bowers Micro-Liner - Hunter Green x Brass
Regular price$350.00 USD
BLACK FRIDAY × BLACK NOVEMBER 2026 SPECIAL RELEASE!
Part of our annual BLACK NOVEMBER sale, this special edition machine is available in a limited run at exclusive pricing. Check out our full BLACK NOVEMBER collection for more special releases every Friday throughout November!
Highlights:
3 Piece Bolt-Up Body
Blackened Steel Vise and Spring Shelf
Anodized Green Aluminum Body
Deluxe BRASS Hardware
Weighing in at a mere 2.95 oz!
Runs best between 6-7 Volts
Pushes any grouping with ease
Specifications:
Runs best between 6-7 Volts
Pushes any grouping with ease
Made in the USA
A few words from Joshua about this machine:
"This machine is designed, built and tuned to run like a coil machine. The tuning is in the frame geometry and setup so there's no knobs or settings to fall out of adjustment. Ready to tattoo out of the box. Light, but not too light. Very punchy and snappy on the tip of the stroke and backs off slightly in the middle of the stroke. Great for sculpting fine finesse lines ran off the needle tips and also great for burying a large grouping liner and pulling a solid single pass line quickly." Joshua Bowers Micro Liner Care Instructions
The High-Jack attaches to your workstation magnetically and plugs in to the "machine" port on your power supply effectively moving your clip cord jack 5 feet into the air. This is the ideal position for your clip cord to hang from to keep it off the floor and free from rubbing, tugging, and snagging as you work.
No more rolling over your cord with your chair
Keep your cord off the floor
Reduces the weight hanging off the back of the machine
Reduces tugs and snags as you tattoo
Extends the life of your clipcord
A few words from Joshua about The High-Jack:
"The High-Jack is a product I developed to make my clipcord drape and move more easily. The High-Jack magnetically attaches to your work station and plugs in to the Machine port on your power supply. Your clip cord then plugs in to the High-Jack, effectively lifting the clipcord jack 5 feet in to the air. This allows the cord to drape naturally from above you, doesn’t rub on the floor, doesn’t snag across your lap and it takes weight off of the back of the machine easing hand fatigue greatly.
The High-Jack Switch has all the great features of the basic High-Jack with the great new feature of having a switch box at the end to be able to toggle back and forth between two cords. This is a great feature for people using multiple cord types or just want two cords connected so they don’t have to switch cords back and forth. The toggle move from side to side selecting which cord is powered with off in the middle, so you can run on constant and turn your machine off at the High-Jack.
I have been using this product for over a year now, along with the rest of my shop. We were originally just testing them out but I speak for me and the rest of the shop when I say that we can’t imagine tattooing without them now."
Workhorse Irons
Joshua Bowers SC Bobber - Blood Red
Regular price$495.00 USD
The SC Bobber
Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!
Highlights:
Precision Machined Aluminum Body with Blood Red Double Powder Coat Finish
Matching Steel Swing Gate Vise that works great with all tubes!
Deluxe Brass Hardware
Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord
Specifications:
Operating Range between 4-7 Volts
Snappy Stroke
Pushes any grouping with ease
Great for Lining and Shading
Needle on Bar or Cartridge Use
Weighs 4 oz
Made in the USA
A few words From Joshua about this machine: This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.