Workhorse Model 6 Liner

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Full Size Frame milled in house from a solid block of Ductile Iron
• HD Flat Black Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 8 Wrap 1" Coils with 1/4" Steel Yoke 
• High End Specialty Steel Springs
• Solid Copper Contact with Allen Key Insert
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

Joshua Bowers Micro-Liner Rotary Tattoo Machine

Now with a Swing Gate Vise that works great with all tubes! 

Highlights:

• 3 Piece Bolt-Up Body
• Blackened Steel Vise and Spring Shelf
• Anodized Black Aluminum Body
• Deluxe Brass Hardware
• Now with Bowers Brass Weighted Wingnut for better balance

Specifications:

• Runs best between 6-7 Volts
• Pushes any grouping with ease
• Weighs 3.65 oz

Made in the USA

A few words from Joshua about this machine:

"This machine is designed, built and tuned to run like a coil machine. The tuning is in the frame geometry and setup so there's no knobs or settings to fall out of adjustment. Ready to tattoo out of the box. Light, but not too light. Very punchy and snappy on the tip of the stroke and backs off slightly in the middle of the stroke. Great for sculpting fine finesse lines ran off the needle tips and also great for burying a large grouping liner and pulling a solid single pass line quickly."
Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Seth Ciferri Mini-Flatside Liner

Highlights:

• CNC Cut ALUMINUM Mini-Flatside Liner Frame
  
• Black Anodized Finish
  
• Deluxe Blackened Hardware
  
• Forward Facing Guillotine Vise, Great for Right or Left Handed Use
  
• 1" 8 Wrap Heat Shrink Coils
  

Specifications:

• Medium/Slow Speed with a Heavy Hit
  
• Running 125-130 Hz @ 6 V Unloaded For Steady Single-Pass Heavy Lines
  
• Pushing 7's to 14's Easy, turn up for 18s depending how you tattoo
  
• Weighing in at 5.3 oz

Made in the USA

A few words From Seth about this machine: 
"Woooooo damn these little dudes hit HARD. Weighing a mere 5.3 oz and CNC cut from a solid block of aluminum, they’re built to push the big stuff, from 7 on up. The common shortcomings of aluminum frames have been eliminated, with a steel insert at the clipcord connection, and beefy side plate with nice smooth radii where it meets the base and spring shelf, making this frame just as stiff as iron. 8 layer shorty coils stay nice and cool while pushing those baggy 18 liners all damn day. The guillotine style vise with hold any tube, steel or plastic."

Mike Pike Bullseye Liner with Swing Gate

Highlights: 

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Taped Coils

Specifications:

• Medium Speed with a Hard Hit
• Running 125 - 135 Hz @ 6.5V unloaded
• Pushing 3's-11's with ease
• Weighs 7.2 oz

Made in the USA

Mike Pike Brass Jonesy Liner

Highlights:

• CNC Cut Billet Brass Frame with PIKE Stamp
• Deluxe Blackened Workhorse Hardware
• Over Under Rear Binder Setup
• Custom Designed Pike Vise
• 1" 8 Wrap Gaffers Taped Coils

Specifications

• Quick with a Solid Medium Hit
• Running 150 -160 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 Ounces
  

Made in the USA