New SOBA V2 Mini Clipper Liner!

Limited Edition Intergalactic Blue 

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

Highlights:

• CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
  
• Anodized Intergalactic Blue Green Finish
  
• Heavy Weight Brass Vise and Thumbscrew 
• Custom Black Hardware plus Custom Drop Down Rear Binder 
  
• 1" 8 Wrap Custom Matching Coils

Specifications:

• Great for Medium to Large Groupings
  
• Medium Speed with a Hard Hit 
  
• Pushing 5's to 14's All Day
  
• Running 130-135 Hz @ 6.5 V Unloaded
  
• Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
  

Made in the USA

New SOBA V2 Mini Clipper Liner!

Limited Edition Reluctant Red

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

Highlights:

• CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
  
• Anodized Red Finish
  
• Heavy Weight Brass Vise and Thumbscrew 
• Custom Black Hardware plus Custom Drop Down Rear Binder 
  
• 1" 8 Wrap Custom Matching Coils

Specifications:

• Great for Medium to Large Groupings
  
• Medium Speed with a Hard Hit 
  
• Pushing 5's to 14's All Day
  
• Running 130-135 Hz @ 6.5 V Unloaded
  
• Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
  

Made in the USA

The SC Bobber

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Blood Red Double Powder Coat Finish
  
• Matching Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

The SC Bobber

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body 
• Hand carved, patina’d and rubbed, then sealed up with a satin varnish to give it this incredible finish.. Paired with patina’d brass hardware. The perfect look..
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• CNC Cut Iron with the highest precision and care for superior conductivity
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Antique Nickel Plated Frame
• Deluxe DK 24k Gold Plated DK Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• CNC Cut Iron with the highest precision and care for superior conductivity
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Rubbed Bronze Plated Frame
• Deluxe DK 24k Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.