December is an expensive month, as a thanks for your continued business and support all items on the Holiday Sale page are 20% OFF the lowest listed price!

20% OFF DISCOUNT APPLIES IN CART!  No Code Needed. Sale goes through the end of the year.

Order by 12 pm Noon December 20th with Next Day Air shipping method to receive by Christmas!

Never before offered Zephyr Combo Tattoo Machine Kits, plus optional armature bar fixture!

Cory Rogers Zephyr Machine Kit - COMBO Kit includes one full size frame with geometry to build and setup the machine as either a Liner or Shader. Kit includes both Liner and Shader Armatures and Springs. 

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Full Size Iron Zephyr Frame
• Blackend Finish
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils plus 1/4" Yoke
  
• Liner and Shader Armature Bar Included 
  
• 2 Liner and Shader Spring Sets
  
• All Screws you'll need PLUS necessary wrenches 
  
• Washer Package including all washers needed (steel, fiber, and shims)

Liner typical specs:

• Medium Fast Speed with a Solid Hit
• Great Liner for Traditional Work
• 135-140Hz. @ 6.5 V unloaded
• Pushes 5s to 11s Easy
• Weighs 6.75 oz

Shader typical specs:

• Slow Speed with a Hard Hit and Long Stroke
  
• Great Shader for Traditional Work
• 100-105 Hz. @ 6.5 V unloaded
• Pushes 5s to 15s Easy
• Weighs 6.75 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit Includes: SOBA’s Pilot frame, Shaders come with 1 pair of 8 wrap 1.25" coils and Liners come with 1 pair of 6 wrap 1.125" coils , appropriate armature bar, front and rear steel binding posts, contact screw, all washers including insulators, black, and magnetic steel shims, all screws, capacitor, cast iron wing nut, Allen wrench, and 2 sets of fully punched springs. Essentially everything needed to assemble a complete machine. Skills and instructions NOT included. MADE IN THE USA.

Limited Run of Seth Ciferri Version 2 Weiner Dog Machine Kits

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Weiner Dog V2 Frame
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar (liner or shader, depends on what you order)
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
- Wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
- Washer Package including all washers needed... (steel, fiber, and shims)

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

and we are proud to say that all parts are made in the USA.

thanks, good luck, and have fun with your new project!

seth c.

The official Seth Ciferri "build it your fucking self" tattoo machine kit.

Includes everything needed to build a nice tattoo machine... (mojo not included)

• new "fastback" walker-style frame in iron - liner or shader. these new castings feature improved geometry, tighter tolerances, a more user-friendly surface finish, and nice big "PDX,OR" (portland oregon, for those who dont know) cast on the interior of the frame upright, to let folks know it's the real deal, and from whence it came...
• coil set with capacitor and lugs - (iron liners come with 1.25" 6 wrap. iron shaders come with 1.25" 8 wrap.)
• armature bar (liner or shader, depends on what you order)
• spring set
• all screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
• insulator package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
• our beautiful new steel binding posts and Chris Smith copper contact screw. (exclusive to us. unavailable from any other builder or supplier)
• washer package - includes all washers needed... (black, fiber, shims, and lock)
• wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
• full guarantee on the quality of all parts

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

we are proud to say that all parts are made in the USA, the majority of which being made right here in Portland, Oregon.

thanks, good luck, and have fun with your new project!

seth c.