New SOBA V2 Mini Clipper Liner!

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

Highlights:

• CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
  
• Raw Brass Vise and Thumbscrew
  
• Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder 
  
• 1" 8 Wrap Custom SOBA Coils

Specifications:

• Great for Medium to Large Groupings
  
• Medium Speed with a Hard Hit 
  
• Pushing 5's to 14's All Day
  
• Running 130-135 Hz @ 6.5 V Unloaded
  
• Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
  

Made in the USA

NEW Mini Version of Mike Pike's Mean Mugger Liner!

Highlights:

• Black Zinc Finished Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise guaranteed to lock tight on any tube

Specifications:

• Running 135-140 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 3's to 11's all day
• Weighs 7 oz
  

Made in the USA

Juan Puente OG Liner - Black x Black

Highlights:

• CNC Cut Iron Frame
• HD Custom Black Finish
  
• Deluxe Black Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 6 Wrap Standard Electrical Tape Coils

Specifications:

• Medium Speed with a Solid Hit
• 140-145 Hz at 6.5 V Unloaded
  
• Pushing 3-11's Easy
• Weighs 7.2 oz

Made in the USA

SOBA Cast Iron Pilot Liners and Shaders

*NOW WITH SWING GATE VISE! Guaranteed to lock tight on any tube.

After 20+ years of production, numerous machining updates and tuning tweaks, these are the longest running models we sell. With long forgiving geometry, these machines are the tried, true, and consistent Workhorses of tattooing. Built to last a lifetime with little muss or fuss. Great for apprentices figuring out the basics, as well as veterans looking for the feel and performance of an all around solid coil machine.

Highlights:

• Sand Cast Ductile Iron Frame
  
• Workhorse Red Oxide Finish
  
• Standard Workhorse Hardware
  
• 6 Wrap 1.125" Production Coils
  

Specifications:

• An All Around Outlining Tool....perfect for those long days of knocking out flash tattoos with speed and precision.
  
• Long Frame Machine Allowing a Liners Point Gap, with a Long Stroke
• Running 130-135 Hz @ 6.5 Volts Unloaded
  
• Pushes 3s to 11s Easy
  
• Weighs 7.5 oz
  

Made in the USA

Mike Pike Smith & Howard Liner!

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a "Blackie Frame" for its association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

Highlights:

• Mini Pike S&H Frame CNC Cut from Iron Bars
  
• Black zinc frame finish with Deluxe Workhorse Blackened Hardware to match
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
• Long fluted armature speed bar
• Blackened steel binding posts
• 1" 8 Wrap Workhorse Coils

Specifications:

• Medium Speed with a Long Stroke and Hard Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 14s
  
• Weighs 6.4 oz

Made in the USA

Seth Ciferri Micro Jones Liner

Highlights:

• CNC Cut Iron Micro Jones Liner Frame
  
• Black Zinc Finish
  
• Seth Deluxe Blackened Hardware
  
• Seth Side Facing Guillotine Vise
  
• 1" 8 Wrap Workhorse Coils

Specifications:

•  Medium Quick Speed with a Hard Hit
  
• Running 135-140 Hz @ 6 V Unloaded
  
• Pushing 3's to 14's Easy
  
• Weighs 7.2 oz
  

Made in the USA

A few words From Seth about this machine: 
"These are the culmination of everything I've learned in more than 20 years of building machines; from a comfortable clip cord position, purposeful geometry, ease of maintenance, useful tube vise, to good balance, and everything else in between. They have a wide operating range and are capable of pushing the big stuff with ease or backing off for finesse when executing the most detailed and intricate work. I couldn't be happier with how they've turned out."

Seth Ciferri Mini-Flatside Liner

Highlights:

• CNC Cut ALUMINUM Mini-Flatside Liner Frame
  
• Black Anodized Finish
  
• Deluxe Blackened Hardware
  
• Forward Facing Guillotine Vise, Great for Right or Left Handed Use
  
• 1" 8 Wrap Heat Shrink Coils
  

Specifications:

• Medium/Slow Speed with a Heavy Hit
  
• Running 125-130 Hz @ 6 V Unloaded For Steady Single-Pass Heavy Lines
  
• Pushing 7's to 14's Easy, turn up for 18s depending how you tattoo
  
• Weighing in at 5.3 oz

Made in the USA

A few words From Seth about this machine: 
"Woooooo damn these little dudes hit HARD. Weighing a mere 5.3 oz and CNC cut from a solid block of aluminum, they’re built to push the big stuff, from 7 on up. The common shortcomings of aluminum frames have been eliminated, with a steel insert at the clipcord connection, and beefy side plate with nice smooth radii where it meets the base and spring shelf, making this frame just as stiff as iron. 8 layer shorty coils stay nice and cool while pushing those baggy 18 liners all damn day. The guillotine style vise with hold any tube, steel or plastic."

Cory Rogers Cracker Liner

Highlights:

• CNC Cut Iron Mini Liner Frame
  
• Blackened Finish
  
• Blackened Workhorse Hardware
  
• 8 Wrap 1" Workhorse Coils

Specifications:

• Medium Speed with a Hard Hit
  
• Great Liner for Traditional Work
  
• 130-135 Hz. @ 6 V unloaded
  
• Pushes 5s to 11s with Ease
  

Made in the USA

Seth Ciferri's Middleweight Weiner Dog Liner 2.2!

Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power but still keeping the weight under 6 ounces!

NOW WITH A SPRING LOADED SWING-GATE VISE

Highlights:

• CNC Machined Iron Frame 
  
• Deluxe Black Zinc Finish
  
• Swing-Gate Vise Guaranteed to Lock Tight on Any Tube
  
• Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
  
• 1" 8 Wrap Taped Coils Plus Capacitor Strap

Specifications:

• Medium Speed with a Hard Hit To push Larger Groupings
  
• Running 130-135 Hz @ 6 V Unloaded
  
• Pushing Loose 5's to 14's Easy
  
• Weighs 5.95 oz
  

Made in the USA

Seth Ciferri Light Weight Weiner Dog Liner 2.1

Highlights:

• CNC Iron Frame
• New Improved Geometry providing a very powerful hit from a very small machine
  
• Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry 
  
• Standard Workhorse Red Oxide Finish
  
• Black Workhorse Hardware and Coin Thumbscrew
• 1" 8 Wrap Workhorse Coils Plus Capacitor Strap

Specifications:

• Medium Speed with a Hard Hit To push Larger Groupings
  
• Running 130-135 Hz @ 6 V Unloaded
  
• Pushing Loose 5's to Loose 11's Easy
• Weighs 5.5 oz
  

Made in the USA

Mike Pike Bullseye Liner with Swing Gate

Highlights: 

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Taped Coils

Specifications:

• Medium Speed with a Hard Hit
• Running 125 - 135 Hz @ 6.5V unloaded
• Pushing 3's-11's with ease
• Weighs 7.2 oz

Made in the USA

Seth Ciferri's Middleweight LEFTY Weiner Dog Liner 2.2!

Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power while still keeping the weight under 6 ounces. Additionally, this iron frame is positioned completely backwards for left-handed use.

Highlights:

• Completely Backwards Iron Frame for Left-Handed Use
  
• Workhorse Red Oxide Finish
  
• Standard Pinch Vise
  
• Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
  
• 1" 8 Wrap Heat Shrink Coils Plus Capacitor Strap

Specifications:

• Medium Speed with a Hard Hit To push Larger Groupings
  
• Running 130-135 Hz @ 6 V Unloaded
  
• Pushing Loose 5's to 14's Easy
  
• Weighing in at a mere 5.95 oz
  

Made in the USA

Cory Rogers Rex Liner

Highlights:

• CNC Cut Iron Frame
  
• Antiqued Workhorse Hardware
  
• 8 Wrap Phenolic 1" Coils

Specifications:

• Medium Speed with a Solid Hit
  
• Great Liner for Traditional Work
  
• 125-135 Hz. @ 6 V unloaded
• Pushes 5s to 11s No Problem
• Weighs 7.3 oz
  

Made in the USA

Cory Rogers Zephyr Liner

Highlights:

• CNC Cut Iron Mini Liner Frame
  
• Blackened Finish
  
• Black Workhorse Hardware
  
• 8 Wrap 1" Black Tape Coils

Specifications:

• Medium Fast Speed with a Solid Hit
  
• Great Liner for Traditional Work
  
• 135-140Hz. @ 6.5 V unloaded
  
• Pushes 5s to 11s Easy
  
• Weighs 6.75 oz

Made in the USA

Seth Ciferri Mini-Flatside Liner

Highlights:

• CNC Cut ALUMINUM Mini-Flatside Liner Frame
  
• Distressed Pink Powder Coat Finish
  
• Deluxe Blackened Hardware
  
• Forward Facing Guillotine Vise, Great for Right or Left Handed Use
  
• 1" 8 Wrap Custom Coils

Specifications:

• Medium/Slow Speed with a Heavy Hit
• Running 125-130 Hz @ 6 V Unloaded For Steady Single-Pass Heavy Lines
• Pushing 5's to 11's Easy, turn up for 14s depending how you tattoo
• Weighs 5.3 oz

Made in the USA