New Version 3 Adam Ciferri Ghost Dog Shader Hybrid

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Medium/Light hit that easily pushes 5's to 9's, turn up a bit and push 11s no problem
• Runs 115-120 Hz @ 6.5 Volts Unloaded
• Good for Quick Color Packing or B&G Work / Color Blends
• CNC Cut Iron with the highest precision and care
• Mini-Size frame with 1" 16 Wrap Coils
• Standard Workhorse Red Oxide Finish
• Standard Workhorse Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Limited Edition run of Supreme Style OG Flastside Walkers!

We are very stoked to finally release this special edition run of machines that have been in the works for months. From digging up the old pattern, casting frames, various machining tweaks, hand grinding, stamping, polishing, custom coils, quarters straight from the US mint, silver contacts, assembly and fine tuning....these machines are top notch with no expense spared in their creation.

Technical Specs:

• Cast Brass OG Walker Frame
• Hand Ground, Prepped and Lightly Polished Finish
• Deluxe Brass Hardware, Plus Silver Contact
• Hand Brazed Collet Vise, great for use with Disposable and Steel Tubes
• 2020 Milled Quarter Spring Saddle, Plus Dime Washers
• 1.25" 10 Wrap Square Bottom Custom Coils with Specialty Cores
• Medium Speed with a Long Stroke and Solid Hit
• Running 100-105 Hz at 6V Unloaded
• Pushing 5's to 11's No Problem
• Weighing in at ounces about 7 ounces
• As always, MADE IN THE USA

Aaron Cain Roundback Shader Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- New CNC Cut Iron Frame
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1.25" 8 Wrap Black Heat Shrink Coils
- Long Stroke with a Hard Medium Hit
- Running 100-105 Hz @ 6.5 V unloaded
- Pushing 5's to 13's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

New Aaron Cain Octet Liner and Shader! Classic Aaron Cain styling mixed with his precision building and tuning resulting in a basic Workhorse version of his famed customs and carved machines.

- New CNC Cut Iron Frame
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1.25" 8 Wrap Black Heat Shrink Coils
- Long Stroke with a Hard Medium Hit
- Running 100-105 Hz @ 6.5 V unloaded
- Pushing 5's to 13's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

Seth Ciferri Mini Fastback Shader

- CNC Cut Iron Mini Fastback Shader Frame
- Black Zinc Finish
- Black Workhorse Hardware and Coin Thumbscrew
- Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
- 1" 8 Wrap Workhorse Coils
- Medium Speed with a Hard Hit
- Running 105-110 Hz @ 6 V Unloaded
- Pushing up to 13's Easy
- Weighs 7.2 oz
- MADE IN THE USA

Juan Puente OG Shader

The day has finally come...we now have a Juan Puente Workhorse model! Still built and tuned by Juan, these machines are cnc cut instead of welded and have the standard basic Workhorse finishing touches.

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Hardware
• 1.25" 8 Wrap Standard Heat Shrink Coils
• Swing Gate Vise Guaranteed to lock tight on any tube
• Slow Speed with a Solid Hit
• 100-104 Hz at 6 V Unloaded
• Pushing up to 13's All Day

Cory Rogers Mini Rusto Shader with Swing Gate Vise

After many years and many updates we are excited to release SOBA's newest version of the Mini Rusto, now built by Cory Rogers!

- CNC Cut Ductile Iron Frame
- Drilled Out and Lightened Upright
- Swing Gate Vise with and Internal Spring for ease of use
- Black on Black Finish
- Custom Deluxe Black Hardware
- Deluxe 1" 8 Wrap T-Top Coils
- Medium Quick Speed with a Solid Hit
- Pushing 5's to 13's easy
- Great for Packing in Solid Color, turn down a bit for Color Blends and Whip Shading
- Running 110-115 Hz @ 6.5 V Unloaded
- Weighs 6.8 oz
- MADE IN THE USA

*For those that might be wondering, Mini Rustos are now built by Cory Rogers as part of SOBA's partial machine retirement! Same quality, care, and performance the Mini Rusto has always possessed, just built by another one of our highly qualified builders.

New Seth Ciferri Middleweight Weiner Dog Shader 2.2! Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power but still keeping the weight under 6 ounces!

**NOW WITH A SPRING LOADED SWING-GATE VISE

- CNC Machined Iron Frame
- Deluxe Black Finish
- Swing-Gate Vise Guaranteed to Lock Tight on Any Tube
- Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
- 1" 8 Wrap Taped Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit
- Great For Color Packing and Whip Shading
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 5's-15's All Day
- Weighing in at a mere 5.95 oz
- MADE IN THE USA

NEW Seth Ciferri Micro Jones Shader

- CNC Cut Iron Micro Jones Shader Frame
- Black Zinc Finish
- Black Workhorse Hardware
- Seth Ciferri Side Facing Guillotine vise
- 1" 8 Wrap Workhorse Coils
- Medium Slow Speed with a Hard Hit
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 5's to 15's All Day
- MADE IN THE USA

A Few Words From Seth about this machine:
"these are the culmination of everything I've learned in more than 20 years of building machines, from a comfortable clip cord position, purposeful geometry, ease of maintenance, useful tube vise, to good balance, and everything else in between. they have a wide operating range, and are capable of pushing the big stuff with ease, or backing off for finesse when executing the most detailed and intricate work. I couldn't be happier with how they've turned out."

Seth Ciferri Light Weight Weiner Dog Shader 2.1

Extremely Lightened Weiner Dog 2.1 CNC Iron Frame. Shaders weigh a mere 5.5 ounces

- New Improved Geometry providing a very powerful hit from a very small machine
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish
- Black Workhorse Hardware and Coin Thumbscrew
- 1" 8 Wrap Workhorse Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit
- Great For Color Packing and Whip Shading
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 7's-13's All Day
- MADE IN THE USA

Mike Pike Half Cup Shader

- CNC Cut Iron Frame with PIKE Stamp
- Workhorse Red Oxide Finish
- Standard Antiqued Workhorse Hardware
- 1" 8 Wrap Black Heat Shrink Mini Coils
- Shaders are Quick with a Hard Hit
- Running 100-105 Hz @ 6.5V Unloaded
- Pushing 5's-9's Easy
- Weighing a Mere 6.5 Oz
- MADE IN THE USA

Mike Pike Teacup Shader

- Blackened CNC Cut Iron Frame
- 1 1/4" Deluxe 8 Wrap Coils with Gaffers Tape
- Deluxe Antiqued Hardware
- Rear Mount Rear binder
- Smooth with a Solid Hit, running 105-110 Hz @ 6.5 V unloaded
- Pushing 5's to 9's with ease
- Tough and Versatile, a true Workhorse
- Weighs 8.10 oz
- MADE IN THE USA

New model from SOBA! The “Deacon” is a mini version of the Pilot, redesigned by SOBA as a more compact version with all the performance and consistency you would expect. Swing gate vise, fancy hardware, custom coils, and black on black on black finish

Machine Specs:

- Long Frame Machine with a Long Stroke and Slow Hard Punch
- Great All Around Shader
- CNC Machined Frame plus Swing Gate Base / Vise
- Deluxe Black Finish
- Black Deluxe Hardware
- 8 Wrap 1" Black Custom Coils
- Running 100 Hz @ 6.5 Volts Unloaded
- Hard Hit, Slow Speed, Good for 5s to 13s Easy
- Weighing in at 7 oz
- MADE IN THE USA

*For those that might be wondering, Pilot Shaders are now built by Adam Ciferri as part of SOBA's partial machine retirement! These Mini-Pilots are built by SOBA through the end this year, then SOBA will be taking a break from machine building for the entire year of 2020. Get em while you can, otherwise you may be waiting until 2021!

New Seth Ciferri Middleweight LEFTY Weiner Dog Shader 2.2! Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power but still keeping the weight under 6 ounces!

- Completely Backwards Iron Frame for Left Handed Use
- Workhorse Red Oxide Finish
- Standard Pinch Vise
- Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
- 1" 8 Wrap Heat Shrink Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit
- Great For Color Packing and Whip Shading
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 5's-15's All Day
- Weighing in at a mere 5.95 oz
- MADE IN THE USA

Mike Pike Mean Mugger Shader
- Blackened Iron Frame
- Deluxe Hardware
- Custom 1.25" Coils
- Medium Speed with a Solid Hit
- Running 105-110 Hz @ 6.5 V unloaded
- Pushing 5's to 9's with ease
- Weighs 9 oz
- MADE IN THE USA