• High-grade Aluminum body precision milled
• Custom Black Anodized Parts with HD Satin Chalk Pink Powder Coated Frame, plus Blackened Deluxe Binders and Cast WH Wingnut
• Custom Etched Cory Rogers Skulls and Daggers
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of HD Olive Green Powder Coated Bodies with Blackened Motor Cap, Swing Gate Vise, and Polished BRASS Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of Brushed Nickel Plated Aluminum Frames PLUS 24k Gold Plated Motor Cap, Swing Gate Vise, Cam, and Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

• High-grade Aluminum body precision milled
• Custom Blue Anodized Parts with Purple Frame, plus Blackened Deluxe Binders and Cast Iron Wingnut
• Custom Pike Rogers text plus Smiley
  
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

• High-grade Aluminum body precision milled
• Custom Purple Anodized Parts with Blue Frame, plus Blackened Deluxe Binders and Cast Iron Wingnut
• Custom Pike Rogers text plus Smiley
  
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Limited Mike Pike x Destroy Troy Teacup Liner - Kermit the Frog

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Destroy Troy Warp Drive Cray Bar
  
• Custom 8 Wrap Matching Coils
  
• Custom Cut Destroy Troy x Mike Pike Gold Glitter Coil Washers
• Sour Apple Sparkle Green Aluminum Frame
• 24k Gold Plated Destroy Troy Forward-Weighted Vise Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware and Spring Shelf Yoke for Superior Connectivity
• 24k Gold Plated Silver Contact Screw and Springs
  

Specifications:

• Medium Speed with a Solid Hit
• Running  around 130 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

NEW Mini Version of Mike Pike's Mean Mugger Liner! Limited Edition Sour Apple x Black

• HD Illusion Sour Apple Green Powder Coated Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise Guaranteed to Lock Tight on Any Tube
• Running 135-140 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 3's to 11's all day
• Weighs 7 oz
• MADE IN THE USA

NEW Mini Version of Mike Pike's Mean Mugger Shader! Limited Edition Sour Apple x Black

• HD Illusion Sour Apple Green Powder Coated Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise Guaranteed to Lock Tight on Any Tube
• Running 110-120 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 5's to 13's all day
• Weighs 7 oz
• MADE IN THE USA

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

-High-grade Aluminum body precision milled with a durable Black Anodize Finish
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

New Mike Pike x Cory Rogers Linear Rotary!

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• High-grade Aluminum body precision milled
• Custom Green Anodized Parts with Rainbow Glitter Powder Coated Frame, plus 24k Gold Plated Binders and Wingnut
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz
• Available with Clip Cord or RCA connection option

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

NEW Mini Version of Mike Pike's Mean Mugger Liner!

• Black Zinc Finished Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise Guaranteed to Lock Tight on Any Tube
• Running 135-140 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 3's to 11's all day
• Weighs 7 oz
• MADE IN THE USA

NEW Mini Version of Mike Pike's Mean Mugger Shader!

• Black Zinc Finished Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise Guaranteed to Lock Tight on Any Tube
• Running 110-120 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 5's to 13's all day
• Weighs 7 oz
• MADE IN THE USA

New Mike Pike Smith & Howard Liner!

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a Blackie frame for it's association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

• Mini Pike S&H Frame CNC Cut from Iron Bars
• Black Zinc Finish
• Deluxe Workhorse Blackened Hardware
• Long Fluted Armature Speed Bar
• Blackened Steel binding posts
• 1" 8 Wrap Workhorse Coils
• Medium Speed with a Long Stroke and Hard Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 14s
• Made in the USA by Mike Pike
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
• 6.4 ounce weight