Hustle Butter Tattoo Aftercare Wrap, 7.9 IN X 8.8 YDS
Hustle Butter Tattoo Aftercare Wrap is FINALLY HERE. Artists, this is for you. This expertly-designed protective wrap is the PERFECT addition to your station. Use this professional grade tattoo aftercare wrap to keep the newly tattooed area clean, promoting a healthy environment for your masterpiece. This ensures a more convenient heal for your client, as our wrap helps form an effective barrier to contain weeping from the new tattoo. Be sure to instruct your client on how to use this easy-to-remove wrap and advise on the timeline per application.
Hustle Butter Tattoo Aftercare Wrap is a VITAL STEP in your post-process regimen. With almost 9 yards of wrap, you will be covered for tattoos of all shapes and sizes. Our cleverly designed box allows you to measure and cut only what you need, while keeping the rest of the unused roll sanitary. Your art deserves to look its best today, tomorrow, forever, and starting off with the right wrap sets your client on the journey to fresh-looking artwork for life. So, what are you waiting for?
Before First Use:
Upon receiving the box, be prepared with two sets of clean, unused gloves.
Put on the first set and carefully tear the perforated strip in the center of the box. Remove the plastic surrounding the wrap inside the box.
With a new set of clean gloves (be sure to change once you are touching the wrap itself) remove the colored tape and put the wrap back inside the box.
Thread the wrap through the perforated slit.
How To Use:
Before application, with clean gloves, clean, rinse and dry the tattoo area thoroughly.Be sure there is no remaining soap, ink or other residue before applying the wrap.
With a new set of clean gloves, measure the amount of wrap needed (unrolling the wrap as required) and cut accordingly. Be sure the film is measured to exceed the perimeter of the tattoo by 1.5 inches. If needed, more than one piece can be used to provide complete coverage.
Peel the film’s papers and gently apply the adhesive side to the area being protected. Using light pressure, smooth from the middle out to limit any air pockets.
Remove the film’s top layer.
To remove, peel film from the edges, using warm water in small amounts to help loosen as needed.
Please Note:
If applying a wrap to the same area more than once, gently clean, rinse and pat dry the area between applications.
Do not reuse the same piece of wrap, each application is designedfor single use only.
Do not wear any one piece of wrap for longer than 5 days. For larger pieces, it is recommended to change the wrap after the first 24 hours, depending on the level of seepage. It is normal for fluids to collect under the wrap as the tattoo heals. Always instruct your clients on the best course for their particular tattoo.
If you recently got a tattoo and have any questions, it is always best to reach out to your artist for your unique instructions.
Warnings:
Use only as directed.
For external use only.
May cause allergic reactions in persons with adhesive allergies. Discontinue use and consult a medical professional if reaction occurs.
Only apply to clean, rinsed and dry skin and be sure to thoroughly wash off any residue prior to use. Product residue left on skin prior to application can cause a reaction with the adhesive.
Dan Kubin Mojobox V2.2 - Black x Gold Featherweight
Regular price$850.00 USD
Dan Kubin Mojobox V2.2
Newly remastered, this is the 2nd variant of the 2nd generation of the Mojobox. New spring setup that enhances performance, punch, adjustability, and makes it more cartridge friendly!
Now with more versatility and ease of hit adjustment throughout the tattoo. It is more ergonomic, more reliable, and most of all, more performance focused than its predecessor. It is a punchy coil like machine with the reliability and ergonomics of a rotary.
Highlights:
Featherweight Aluminum Frame with Black HD Anodized Finish
24k Gold Plated Parts
Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot. You can’t make it too long or too short
Specifications:
Normal operating range: 5.3 - 6 volts for lining, 4 - 5.5 volts for shading.
Excellent for fine line, black and grey, color packing with any size mag.
Can drive 14 liners, if you prefer to “set the needle into the skin”
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive, which is the nature of a cartridge.
Weight: 2.95 oz
Made in the USA!
All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Mike Pike x Destroy Troy Teacup Liner - GOLD x BLK 7075
Regular price$575.00 USD
NEW Mike Pike x Destroy Troy Halfcup Liner!
Limited Edition 24k Gold 7075 Frame with Black Parts
Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.
Highlights:
Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
Black Destroy Troy Cray Bar with added weight on the front end
Dan Kubin Sidewinder 46er - Pink x Gold RCA + Clip Cord
Regular price$1,030.00 USD
Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord Connection!
New Limited Run of HD Pink Powder Coated Brass V46er with 24k Gold Plated Hardware and RCA + Clip Cord connection for all the options!
The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.
Highlights:
Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Reliable Mabuchi motor. -because they run forever without losing consistency.
Specifications:
Weights 6oz
Recommended voltage range: 4 - 6.5 volts
Approximate stroke range: 2 - 4mm (Keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)
RCA Specifications:
RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
The position of the battery makes the machine’s balance point much more forward, like a pen.
NEW RCA / Clip cord version with straight up battery position
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website..
Each Spring Set Includes: Fully punched front and rear springs.
Liner Spring Set- Eddy Deutsche Liner (Medium Front, Short Rear) Shader Spring Set- Eddy Deutsche Shader (Long Front, Short Rear)
Workhorse Irons
Adam Ciferri V4 Ghost Dog Shader - Green x Green
Regular price$425.00 USD
New V4 Adam Ciferri Ghost Dog Shader!
Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.
A few words from Adam about this machine: "The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine" -Respectfully, Adam C.
Highlights:
CNC Cut Iron with the highest precision and care
Custom Olive Green 1" Keg Coil
Custom Plateau Green Powder Coat Finish
Deluxe Workhorse Blackened Hardware
Specifications:
Tuned for all-day, every-day street shop and/or custom tattooing
Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit