Limited Mike Pike Mini Mugger Liner - Wild Style

Workhorse Irons

Limited Mike Pike Mini Mugger Liner - Wild Style

$400.00 USD

Mini Version of Mike Pike's Mean Mugger Liner!

Limited Edition Tri-colorway with fun and funky Die contact!

Highlights:

Blended Hot Pink, Ugly Green, and Orange Powder Coated Iron Frame
Deluxe Blackened and Matching Hardware PLUS Purple Dice Contact
Swing Gate Vise guaranteed to lock tight on any tube
1" Custom Matching Coils

Specifications:

Running 135-140 Hz @ 6.5 V unloaded
Medium Speed with a Solid Hit
Pushing 3's to 11's all day
Weighs 7 oz

Made in the USA

Customer Reviews

Based on 1 review Write a review

Eddy Deutsche V2 Blade Runner Shader - Black x Black

Workhorse Irons

Eddy Deutsche V2 Blade Runner Shader - Black x Black

$450.00 USD

Eddy Deutsche V2 Blade Runner Shader - Black x Black

Limited Eddy Deutsche V2 Blade Runner Shaders now in a more compact frame! Same great power and precision, less weight and bulk.

Highlights:

Precision Machined Iron Frame Designed by Eddy Deutsche
HD Flat Black Powder Coat Finish
Blackened Deluxe Hardware
Pure Copper Contact
Eddy Deutsche Magic
Custom Hand Wound 8 Wrap Coils with Black Tape

Specifications:

Medium / Quick Speed with a Solid Hit
Designed to run like Eddy tattoos
Running around 115-120 Hz Unloaded
Eddy prefers to run these hard at 7-8 Volts, but also work well at lower voltage for a bit less aggressive tattooing
Great for fast color packing with 5s to 13s, turn up for 15s
Weighs 6.5 oz

Made in the USA

Eddy Deutsche V2 Blade Runner Liner - Black x Black

Workhorse Irons

Eddy Deutsche V2 Blade Runner Liner - Black x Black

$450.00 USD

Limited Edition Eddy Deutsche V2 Blade Runner Liner!

Limited Eddy Deutsche V2 Blade Runner Liners now in a more compact frame! Same great power and precision, less weight and bulk.

Highlights:

Precision Machined Iron Frame Designed by Eddy Deutsche
HD Flat Black Powder Coat Finish
Blackened Deluxe Hardware
Pure Copper Contact
Eddy Deutsche Magic
Custom Hand Wound 8 Wrap Coils with Black Tape

Specifications:

Medium Speed with a Solid Hit
Designed to run like Eddy tattoos
Running around 135-140 Hz Unloaded
Eddy prefers to run these hard at 7-8 Volts, but also work well at lower voltage for a bit less aggressive tattooing
Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
Weighs 6.5 oz

Made in the USA

Customer Reviews

Based on 1 review Write a review

Workhorse Model 6 Shader - Kawasaki Green x Black

Workhorse Irons

Workhorse Model 6 Shader - Kawasaki Green x Black

$400.00 USD

Workhorse Model 6 Shader

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Shader inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes.

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

Full Size Frame milled in house from a solid block of Ductile Iron
Kawasaki Green Powder Coat Finish
Deluxe Workhorse Hardware with Black Oxide Finish
Swing Gate Steel Vise
Custom 8 Wrap 1.25" Coils
High End Specialty Steel Springs
Solid Copper Contact with Allen Key Insert
Reverse Rear Binder Setup with frame ground on coil deck
Long Stroke with a solid hit great for 5s to 15s
Medium Speed, running around 105-110 unloaded @ 6.5 Volts
6.5 Ounce Weight
Made in the USA

Workhorse Model 6 Liner - Kawasaki Green x Black

Workhorse Irons

Workhorse Model 6 Liner - Kawasaki Green x Black

$400.00 USD

Workhorse Model 6 Liner

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes.

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

Full Size Frame milled in house from a solid block of Ductile Iron
Kawasaki Green Powder Coat Finish
Deluxe Workhorse Hardware with Black Oxide Finish
Swing Gate Steel Vise
Custom 6 Wrap 1.25" Coils
High End Specialty Steel Springs
Solid Copper Contact with Allen Key Insert
Reverse Rear Binder Setup with frame ground on coil deck
Long Stroke with a solid hit great for 5s to 14s
Medium Speed, running around 135-140 unloaded @ 6.5 Volts
6.5 Ounce Weight
Made in the USA

Dan Kubin Sidewinder v7.5 - Antique Nickel w/ Oak

Workhorse Irons

Dan Kubin Sidewinder v7.5 - Antique Nickel w/ Oak

$1,050.00 USD

Dan Kubin Sidewinder v7.5

The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.

Highlights:

Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
More prominent timing marks on the side plate for the impact pin. (for advanced tuning/stroke adjustment, this helps with being more intuitive)
Cleaner sound/better acoustics.
Side locking screw is positioned to secure the impact screw most effectively

Specifications:

Forward, low and balanced weight of 6.2 oz
Recommended voltage range: 4 - 6.5
Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length. You can simply adjust the return spring tension on the fly throughout the tattoo.

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder v7.5 - Rubbed Bronze w/ Black

Workhorse Irons

Dan Kubin Sidewinder v7.5 - Rubbed Bronze w/ Black

$1,050.00 USD

Dan Kubin Sidewinder v7.5

The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.

Highlights:

Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
More prominent timing marks on the side plate for the impact pin. (for advanced tuning/stroke adjustment, this helps with being more intuitive)
Cleaner sound/better acoustics.
Side locking screw is positioned to secure the impact screw most effectively

Specifications:

Forward, low and balanced weight of 6.2 oz
Recommended voltage range: 4 - 6.5
Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length. You can simply adjust the return spring tension on the fly throughout the tattoo.

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Mojobox go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Mojobox are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

.

Customer Reviews

Based on 2 reviews Write a review

Limited Joshua Bowers SC Bobber - Blue Rust Sparkle Chameleon

Workhorse Irons

Limited Joshua Bowers SC Bobber - Blue Rust Sparkle Chameleon

$460.00 USD

Joshua Bowers SC Bobber

Now with a Swing Gate Vise that works great with all tubes!

Highlights:

Precision Machined Aluminum Body with Custom Sparkle Chameleon Blue Rust Powder Coat Finish
Blackened Steel Swing Gate Vise that works great with all tubes!
Deluxe Brass Hardware
Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

Operating Range between 4-7 Volts
Snappy Stroke
Pushes any grouping with ease
Great for Lining and Shading
Needle on Bar or Cartridge Use
Weighs 4 oz

Made in the USA

A few words from Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.
Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Customer Reviews

Based on 1 review Write a review

Mike Pike Limited Jonesy Liner - Magic Purple x Gold

Workhorse Irons

Mike Pike Limited Jonesy Liner - Magic Purple x Gold

$450.00 USD

Mike Pike Limited Brass Jonesy Liner

Limited Magic Purple x Gold colorway!

Highlights:

Magic Purple Powder Coated CNC Cut Billet Brass Frame with PIKE Stamp
Over Under Rear Binder Setup
24k Gold Plated Deluxe Hardware plus Solid Silver Contact
Custom 1" 8 Custom Coils

Specifications:

Quick with a Solid Medium Hit
Running 145 Hz @ 6.5V Unloaded
Pushing 3's-9's All Day
Weighs 8 oz (Brass weights a little more, but naturally reduces vibration)'

Made in the USA

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Seafoam x Black Aluminum RCA + Clip Cord

Workhorse Irons

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Seafoam x Black Aluminum RCA + Clip Cord

$935.00 USD

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

Highlights:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Specifications:

Weighs 4.4 oz! This Featherweight model has about the perfect amount of mass, where it is light and agile, but not so light that it wants to jump out of your hand or feel shakey.
Recommended voltage range: 4 - 6.5 volts
Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
The position of the battery makes the machine’s balance point much more forward, like a pen.
NEW RCA / Clip cord version with straight up battery position

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Mojobox go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Mojobox are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - Bronze x Black

Workhorse Irons

Dan Kubin Sidewinder 46er - Bronze x Black

$930.00 USD

Dan Kubin's Newest Sidewinder, the V46er!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

Highlights:

Bronze Plated Frame with Black Motor Cover and Hardware🖤
Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Specifications:

Weighs 6 oz
Recommended voltage range: 4 - 6.5 volts
Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)
Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners. Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine lines

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Mojobox go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Mojobox are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Seafoam x Gold Aluminum RCA + Clip Cord

Workhorse Irons

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Seafoam x Gold Aluminum RCA + Clip Cord

$990.00 USD

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. It's number one purpose is as a strong, precise, off the tip liner; though It has proven to be much more capable.

Highlights:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Specifications:

Weighs 4.4 oz. This Featherweight model has about the perfect amount of mass, where it is light and agile, but not so light that it wants to jump out of your hand or feel shakey.
Recommended voltage range: 4 - 6.5 volts
Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
The position of the battery makes the machine’s balance point much more forward, like a pen.
NEW RCA / Clip cord version with straight up battery position

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Olive x Olive Aluminum RCA + Clip Cord

Workhorse Irons

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Olive x Olive Aluminum RCA + Clip Cord

$935.00 USD

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. It's number one purpose is as a strong, precise, off the tip liner; though It has proven to be much more capable.

Highlights:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Specifications:

Weighs 4.4 oz! This Featherweight model has about the perfect amount of mass, where it is light and agile, but not so light that it wants to jump out of your hand or feel shakey.
Recommended voltage range: 4 - 6.5 volts
Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
The position of the battery makes the machine’s balance point much more forward, like a pen.
NEW RCA / Clip cord version with straight up battery position

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Customer Reviews

Based on 2 reviews Write a review

Tattoo Nectar Full Spectrum CBD Tattoo Cream

Tattoo Nectar

Tattoo Nectar Full Spectrum CBD Tattoo Cream

$35.00 USD $25.00 USD

Grouping	Price	Inventory	Quanity
1 oz tin- 250MG CBD	$25.00 USD	Available
1/4 oz tin- 63MG CBD	$8.00 USD	Available

Tattoo Nectar Full Spectrum Tattoo Cream

Description:

The world's most versatile skin cream! Tattoo Nectar can be used during or after a tattoo. Our full spectrum CBD infused tattoo cream is formulated by tattooers to use as a substitute for petroleum based ointments like Vaseline, Aquaphor, and A&D. Our cream is great to layer on a new tattoo and is also a beneficial daily moisturizer that will keep the tattoo vibrant after its healed. Tattoo Nectar is gentle, calming, and soothing. Each of our handmade batches are third party lab-tested to ensure consistency - just scan the QR code included on the inside of our packaging to see for yourself.

WITH RESPECT TO YOUR BODY...

Tattoo Nectar was created by tattooers with the vision of a cleaner and more versatile ointment. In this pursuit we’ve come up with the only full spectrum CBD infused topical for the tattoo community.

"THE MOST VERSATILE OF SKIN CREAMS"

Tattoo Nectar can be used during tattoo application, while the tattoo is healing and after healing to keep tattoos looking vibrant. Tattoo Nectar is the only skin cream you will need for complete care of your tattoo from start to finish. Our versatile topical is for all aspects of tattooing but we are sure you will find an array of uses beyond this. Give your tattoos the essential care they deserve by using Tattoo Nectar in your tattoo healing process.

REDUCES REDNESS & INFLAMMATION

Our Co-Founder Julian Bast uses the cream during the tattoo application process as an alternative to the petroleum ointment, Vaseline. This helps to reduce the redness you see when the tattoo is finished - making it easy to take great photos of new work. It also helps to reduce the inflammation that can occur afterwards when the tattoo is wrapped. We recommend applying our Nectar to a fresh tattoo immediately after the session and just before wrapping the tattoo.

SUPERIOR INGREDIENTS

Tattoo Nectar sources only the highest quality of ingredients for our specially formulated topical. Our base of shea butter is 100% unrefined and organic. We use organic inputs only and the highest quality CBD extracted from organically grown Michigan hemp. Added last in our blend are the cleanest and most essential oils for skin repair and remedy. Our Full Spectrum tattoo cream contains 5 times the amount of CBD than other brands. Our product is Vegan and our packaging is fully recyclable. And absolutely NO testing on animals.

LAB TESTED BY BATCH

Each of our batches are third party lab tested by PSI Labs.org Access each batch's certificate of analysis by scanning the QR code on your product packaging. You can always view our latest C.O.A. on our test results page.

INGREDIENTS:
Shea Butter, Hemp Oil, Almond Oil, Coconut Oil, Cetearyl Alcohol, & Full Spectrum CBD Oil.

1 oz tin- 250MG CBD

1/4 oz tin- 63MG CBD

FDA DISCLOSURE You must be at least 18 years of age to legally purchase any CBD product. This product is for external use only and should be used only as directed on the label. Consult with a physician if you are pregnant or nursing, have a serious medical condition, or are using prescription medications. This product is tested to ensure it contains less than .3% THC.These statements have not been evaluated by the FDA. This product is not intended to diagnose, treat, cure or prevent any disease. By using this site you agree to follow the Privacy Policy and all Terms & Conditions printed on this site. Void Where Prohibited By Law. All trademarks and copyrights are property of their respective owners.

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Pink x Pink Aluminum RCA + Clip Cord

Workhorse Irons

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Pink x Pink Aluminum RCA + Clip Cord

$935.00 USD

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

Highlights:

Durable anodized finish that helps prevent corrosion.
Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Specifications:

Weighs 4.4 oz. This Featherweight model has about the perfect amount of mass, where it is light and agile, but not so light that it wants to jump out of your hand or feel shakey.
Recommended voltage range: 4 - 6.5 volts
Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
The position of the battery makes the machine’s balance point much more forward, like a pen.
NEW RCA / Clip cord version with straight up battery position

Made in the USA!

All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Customer Reviews

Based on 2 reviews Write a review