Limited SOBA Slingapore B&G SHADER 

Limited Galactic Black Golden Sparkle finish

The Slingapore is SOBA's new "weight forward" model made in the Green Lion workshop!  Welded frame, 2 piece tube vise, custom cast SOBA Skull, hand made coil washers, coils, and shoulder washers...all the bells and whistles on this batch!

Highlights:

• Welded Ductile Iron Frame 
  
• Custom SOBA Upright 
  
• Custom Galactic Black Golden Sparkle Powder Coat Finish
• Two Piece Vise with Green Lion Custom Thumbscrew
• Deluxe Custom Brass Hardware
  
• Custom 1" 8 Wrap Custom Embossed Powder Coated Coils with Custom Hand Made Washers!!
• Limited Edition of 4 Machines

Specifications:

• Super Smooth for B&G Shading 
• Softer Hit and Quicker Speed for Building Layers / Gradations
• 115-120 Hz at 6.5 V unloaded
• Great for Medium to Large Groupings
• Pushing 5's to 11's 
  
• Weighs 6.8 oz
  

Made in the USA

Limited SOBA Slingapore Liner

Limited Galactic Black Golden Sparkle finish

The Slingapore is SOBA's new "weight forward" model made in the Green Lion workshop!  Welded frame, 2 piece tube vise, custom cast SOBA Skull, hand made coil washers, coils, and shoulder washers...all the bells and whistles on this batch!

Highlights:

• Welded Ductile Iron Frame 
  
• Custom SOBA Upright 
  
• Custom Galactic Black Golden Sparkle Powder Coat Finish
• Two Piece Vise with Green Lion Custom Thumbscrew
• Deluxe Custom Brass Hardware
  
• Custom 1" 8 Wrap Custom Embossed Powder Coated Coils with Custom Hand Made Washers!!
• Limited Edition of 4 Machines

Specifications:

• Medium Speed with a Solid Hit 
  
• Great for Medium to Large Groupings
• Pushing 5's to 11's 
• Running 130 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz
  

Made in the USA

Deluxe Al Brodeur Workhorse Clip Cord - LIGHT WEIGHT VERSION

• High-End LW Cord, oxygen free, super flexible 
  
• Jacks are sealed, high quality, internally locking so the cord won't come loose 
  
• High Tension Flex Guaranteed to Hold Tight 
• Small Clips for those tight spaces
• Very low voltage loss 
  
• Clean Consistent Power - Machines run smoother and at lower voltage 
  

One Year Warranty - After a year we will still repair or replace at a minimal cost. 

Made in the USA

NEW Guy Le WAVE Liner and Shader Set 

This is the second model we have done with Guy and after almost a year of designing and dialing in, these WAVE machines are finally ready! First batch is fully done up with all the polishing and plating, fine details, and custom components. Limited Edition of 15 pair hand engraved by Guy with Waves, signed and numbered. 

Guest Builder: Guy Le Tatooer

Guy (/ɡiː/) is a world-renowned tattoo artist celebrated for his powerful, timeless tattoos executed with unparalleled precision, skill, and speed. As a second-generation tattoo artist who grew up in a tattoo shop in New Caledonia, Guy has spent most of his life traveling the globe, drawing inspiration from the diverse cultures he has lived in across Asia, Europe, and the Americas.

Throughout his journey, Guy has specialized in large-scale work, known for his ability to cover substantial areas quickly while minimizing healing time for faster recovery. His unique approach to tattooing led him to modify and build custom machines that run at higher voltages—allowing him to work rapidly while delivering the strength needed for extensive pieces.

Whether you’re familiar with his work or experiencing it for the first time, Guy Le brings a fresh and formidable approach to tattooing that embodies both artistry and innovation.

Highlights:

• Liner and Shader Pair of Machines
• Precision Machined Iron Frame Designed by Guy Le Tatooer
  
• High Polished Nickel Plated Finish
  
• Custom Hand Wound Coils with Laser Etched Coil Washers and Blue Fish-scale Reflective Tape
  
• 24K Gold Plated Deluxe Hardware
  
• One-Off Custom Hand Engraving by Guy Le
  

Liner Specifications:

• Medium Quick Speed with a Solid Hit
• Designed to run like Guy tattoos
• Running  around 140 Hz Unloaded at 7 Volts
• Guy prefers to run these hard at 8-9 Volts, but they also work well at lower voltage at 6-8 Volts for a bit less aggressive tattooing
  
• Great for single pass quick and solid lines for Singles to 11s
• Run good with or without O-ring on the Spring....remove the o-ring for slower speed and more slap (may need to turn contact in a quarter turn)
• Made in the USA

Shader Specifications:

• Quick Speed with a Solid Hit
• Hybrid Shader / Packer / Large Liner
• Designed to run like Guy tattoos
• Running  around 120 Hz Unloaded at 8 Volts
• Guy prefers to run these hard at 8-10 Volts, but they also work well at lower voltage at 6-8 Volts for a bit less aggressive tattooing
  
• Great for fast Color Packing and smooth blends with any grouping, PLUS also great for Large Line Work with 14s and Up!
• Run good with or without O-ring on the Spring....remove the o-ring for slower speed and more slap (may need to turn contact in a quarter turn)
• Made in the USA

NEW Guy Le WAVE Shader- Nickel x Gold

This is the second model we have done with Guy and after almost a year of designing and dialing in, these WAVE machines are finally ready! First batch is fully done up with all the polishing and plating, fine details, and custom components. Limited Edition of 10 Liners 10 Shaders. 

Guest Builder: Guy Le Tatooer

Guy (/ɡiː/) is a world-renowned tattoo artist celebrated for his powerful, timeless tattoos executed with unparalleled precision, skill, and speed. As a second-generation tattoo artist who grew up in a tattoo shop in New Caledonia, Guy has spent most of his life traveling the globe, drawing inspiration from the diverse cultures he has lived in across Asia, Europe, and the Americas.

Throughout his journey, Guy has specialized in large-scale work, known for his ability to cover substantial areas quickly while minimizing healing time for faster recovery. His unique approach to tattooing led him to modify and build custom machines that run at higher voltages—allowing him to work rapidly while delivering the strength needed for extensive pieces.

Whether you’re familiar with his work or experiencing it for the first time, Guy Le brings a fresh and formidable approach to tattooing that embodies both artistry and innovation.

Highlights:

• Liner and Shader Pair of Machines
• Precision Machined Iron Frame Designed by Guy Le Tatooer
  
• High Polished Nickel Plated Finish
  
• Custom Hand Wound Coils with Laser Etched Coil Washers and Blue Fish-scale Reflective Tape
  
• 24K Gold Plated Deluxe Hardware
  
• One-Off Custom Hand Engraving by Guy Le
  

Shader Specifications:

• Quick Speed with a Solid Hit
• Hybrid Shader / Packer / Large Liner
• Designed to run like Guy tattoos
• Running  around 120 Hz Unloaded at 8 Volts
• Guy prefers to run these hard at 8-10 Volts, but they also work well at lower voltage at 6-8 Volts for a bit less aggressive tattooing
  
• Great for fast Color Packing and smooth blends with any grouping, PLUS also great for Large Line Work with 14s and Up!
• Run good with or without O-ring on the Spring....remove the o-ring for slower speed and more slap (may need to turn contact in a quarter turn)
• Made in the USA

NEW Guy Le WAVE Liner 

This is the second model we have done with Guy and after almost a year of designing and dialing in, these WAVE machines are finally ready! First batch is fully done up with all the polishing and plating, fine details, and custom components. Limited Edition of 10 Liners / Shaders. 

Guest Builder: Guy Le Tatooer

Guy (/ɡiː/) is a world-renowned tattoo artist celebrated for his powerful, timeless tattoos executed with unparalleled precision, skill, and speed. As a second-generation tattoo artist who grew up in a tattoo shop in New Caledonia, Guy has spent most of his life traveling the globe, drawing inspiration from the diverse cultures he has lived in across Asia, Europe, and the Americas.

Throughout his journey, Guy has specialized in large-scale work, known for his ability to cover substantial areas quickly while minimizing healing time for faster recovery. His unique approach to tattooing led him to modify and build custom machines that run at higher voltages—allowing him to work rapidly while delivering the strength needed for extensive pieces.

Whether you’re familiar with his work or experiencing it for the first time, Guy Le brings a fresh and formidable approach to tattooing that embodies both artistry and innovation.

Highlights:

• Liner and Shader Pair of Machines
• Precision Machined Iron Frame Designed by Guy Le Tatooer
  
• High Polished Nickel Plated Finish
  
• Custom Hand Wound Coils with Laser Etched Coil Washers and Blue Fish-scale Reflective Tape
  
• 24K Gold Plated Deluxe Hardware
  
• One-Off Custom Hand Engraving by Guy Le
  

Liner Specifications:

• Medium Quick Speed with a Solid Hit
• Designed to run like Guy tattoos
• Running  around 140 Hz Unloaded at 7 Volts
• Guy prefers to run these hard at 8-9 Volts, but they also work well at lower voltage at 6-8 Volts for a bit less aggressive tattooing
  
• Great for single pass quick and solid lines for Singles to 11s
• Run good with or without O-ring on the Spring....remove the o-ring for slower speed and more slap (may need to turn contact in a quarter turn)
• Made in the USA
  

Workhorse x Good Judy ECO Premium Needles on Bar

Tested and trusted, these pre-made Eco Conscious Tattoo Needles on Bar provide outstanding quality from WORKHORSE IRONS & GOOD JUDY INC. Their collaboration ensures a check of sustainability you can count on, certified by internationally-recognized third party organizations.

The packaging for these needles is completely unbleached, PFAS-free, compostable and recyclable, and is another step in our companies' commitment to environmental protection.

With more qc checks and heavier needle bars, this top-notch product is perfectly tailored for tattoo artists by tattoo artists, after 20 years of continuously improving their quality and configurations.

Specs:

• #12 Needles on all Traditional Groupings
• #10 Needles on all Tight Groupings / Bugpins
• Made with High Quality 316L Japanese Steel Needles plus Heavy Duty Thicker Needle Bars for greater stability 
• Easy open slide box
• All packaging is unbleached, PFAS free and compostable...even the needle trays and blister paper!
  

We have invested a year of effort and resources to ensure our needles and packaging meet the compostability standards of excellence. Although costly to create, we are proud of the superior results! We strive to offer more environmentally conscious tattoo products and diminish single use plastic while propelling eco-tattooing into ubiquity. This endeavor is yet another milestone toward our eco-friendly mission.

These new needles on bar are the best premium needles we have ever made. Not only are they eco friendly, they also outperform all needles we have tested!

*please let us know if we don't have any groupings you need and we will add them to the line up

Eddy Deutsche Blade Runner Shader!

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Black Long Nipple A Bar
  
• Custom HD Baby Blue Powder Coat
  
• Deluxe Blackened Hardware plus pure Matching Dice Copper Contact
• Custom Hand Wound 8 Wrap Natural Phenolic Coils
  

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running around 110-115 Hz Unloaded at 6.5V
• Great for fast color packing with 5s to 13s, turn up for 15s
  
• Weighs about 7 oz

Made in the USA

Eddy Deutsche Blade Runner Liner!

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Black Long Nipple A Bar
  
• Custom HD Baby Blue Powder Coat
  
• Deluxe Blackened Hardware plus pure Matching Dice Copper Contact
• Custom Hand Wound 8 Wrap Natural Phenolic Coils

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running around 130-135 Hz Unloaded at 6.5V
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
  
• Weighs about 7 oz

Made in the USA

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Teacup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Etched Destroy Troy Horse + Light-Up Red Eye
• Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• Green Anodized and Polished Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
• All Black Hardware
  
• Stainless Springs
• Custom 8 Wrap Black Wire 1.125" Coils

Specifications:

• Medium Speed with a Solid Hit
• Running around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

NEW Deluxe Workhorse V3 Power Supply w/ Internal Battery and Metered Readouts!

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium-ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD SEAFOAM Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!