Special Limited Edition Biomech Dan Kubin V3R Sidewinder carved by Aaron Cain!!!

Machine Specs:

• Raw Brass Frame (for earned natural patina it will gain over time and use) plus Blackened Hardware
  
• Carved and Finished by Aaron Cain!!
• DK Thumbscrew, Batch 4 weighted Armature Bar, and Stroke Wheel
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin. Also good for shading and color blends if you adjust your stroke and voltage.
  
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid

Special Limited Edition Biomech Carving by Aaron Cain

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Biomech Carved and Finished by Aaron Cain!
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom HD Seafoam Powder Coat Finish
• Deluxe DK Blackened Hardware and Stainless Spring
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner or a quick shader. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

Joshua Bowers SC Bobber

Now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Durable Black Anodize Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord
  

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Designed for use with cartridges but is equally effective running needle and tube setup.
• Weighs 4 oz

Made in the USA

A few words from Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

Dan Kubin X Adam Ciferri Ghost Dog Revival POSTER:

18x24" Black Light poster designed by the incredibly talented and handsome Adam Hathorn

Blackwork Nitrile Gloves

Made from a non-latex nitrile formula, these new Blackwork medical grade exam gloves offer all of the benefits of natural rubber latex with none of the allergen problems associated with latex. Blackwork gloves were specially formulated / designed to reduce hand fatigue during long tattoo sessions. Using their patented formula, they've created a glove with almost zero resistance while maintaining comfort, elasticity, and strength. Textured finish for wet and dry gripping ability.

• 100ct. per box, 10 box/case
• Patented Ultra Elastic Black Nitrile Formula
• Near Zero Resistance, reduced hand fatigue over long hours
• Textured surface for greater grip and tactile sensitivity
• Smaller box size reduces shipping cost
• Extreme elasticity

Their new patented Black Nitrile formula is the most scientifically advanced glove in the Tattoo Industry. Unrivaled protection, Zero resistance, Incredible comfort, and a textured surface with unbelievable tactile sensitivity. 

Seth Ciferri Mini-Flatside Liner

Highlights:

• CNC Cut ALUMINUM Mini-Flatside Liner Frame
  
• Distressed Pink Powder Coat Finish
  
• Deluxe Blackened Hardware
  
• Forward Facing Guillotine Vise, Great for Right or Left Handed Use
  
• 1" 8 Wrap Custom Coils

Specifications:

• Medium/Slow Speed with a Heavy Hit
• Running 125-130 Hz @ 6 V Unloaded For Steady Single-Pass Heavy Lines
• Pushing 5's to 11's Easy, turn up for 14s depending how you tattoo
• Weighs 5.3 oz

Made in the USA

Rear Springs - Individual

High Quality US Made blue tempered spring steel, precision cut in two lengths with slotted rear for universal fit.

Available in either 18 or 20 Gauge thickness.

Specs:

• Short : 0.50" width x 1.45" length
  
• Long : 0.50" width x 1.69" length
  

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Matte Olive Powder Coated Brass Frame
• 24k Gold Plated / Black Parts
• 24k Gold Plated Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Seth Ciferri Mini-Flatside Liner

Highlights:

• CNC Cut ALUMINUM Mini-Flatside Liner Frame
  
• Black Anodized Finish
  
• Deluxe Blackened Hardware
  
• Forward Facing Guillotine Vise, Great for Right or Left Handed Use
  
• 1" 8 Wrap Heat Shrink Coils
  

Specifications:

• Medium/Slow Speed with a Heavy Hit
  
• Running 125-130 Hz @ 6 V Unloaded For Steady Single-Pass Heavy Lines
  
• Pushing 7's to 14's Easy, turn up for 18s depending how you tattoo
  
• Weighing in at 5.3 oz

Made in the USA

A few words From Seth about this machine: 
"Woooooo damn these little dudes hit HARD. Weighing a mere 5.3 oz and CNC cut from a solid block of aluminum, they’re built to push the big stuff, from 7 on up. The common shortcomings of aluminum frames have been eliminated, with a steel insert at the clipcord connection, and beefy side plate with nice smooth radii where it meets the base and spring shelf, making this frame just as stiff as iron. 8 layer shorty coils stay nice and cool while pushing those baggy 18 liners all damn day. The guillotine style vise with hold any tube, steel or plastic."

*WE ARE DISCOUNTING THESE AND PLAN TO NO LONGER CARRY THEM. WE STARTED CARRYING THEM DURING COVID WHEN ADENNA NIGHT ANGELS WERE NOT AVAILABLE. NIGHT ANGELS ARE NOW BACK IN STOCK AND PRICING IS SLOWLY GETTING BETTER.

ProWorks® Small Black Nitrile Examination Gloves

• Textured fingers
• Standard length; beaded cuff
• Latex free
• Powder Free
• 3 mil
• Non-sterile
• Standard: Meets ASTM D6319
• Meets FDA CFR Title 21 Indirect Food Additive Regulations Part 174-178

NEW Mini Version of Mike Pike's Mean Mugger Shader!

Highlights:

• Black Zinc Finished Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise guaranteed to lock tight on any tube

Specifications:

• Running 110-120 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 5's to 13's all day
• Weighs 7 oz

Made in the USA

Dan Kubin Replacement Accessory Kit

Components:

• 1.5MM Allen Key
• 5/64" Hex Key
• Taper Pin (used to open up/ensure your needle bar loop is the correct size)
  
• Dan Kubin Universal Sidewinder Spring
• 20 Dan Kubin Perfect Nipples