Twin Blade Disposable Razors
- 50 razors per box or 300 per case
- Long Lasting
- Superior Quality
- Disposable
- Clear Plastic Guard
- Unisex

No Spray Bottle (16 oz)

Green Soap (Gallon)
- Effective detergent/cleaner for removal of dried blood and protein soils from skin and scalp
- Effective for cleaning surgical instruments and surgical apparatus before sterilization
- Preferred by most professional tattoo artists
- Great for cleaning instruments and general use

Green Soap Directions:
Mix 1 part green soap to 8 parts distilled water (example; 1 oz. green soap to 8 oz. distilled water,or 16 oz. green soap to 128 oz. / 1 gallon distilled water.) 
Used to rinse, cleanse, and cool down – before, during, and after tattooing. A must have for any tattoo artist. 
Add some green soap to a foaming hand-soap container and shave your clients with green soap foam.

DILUTING SUGGESTIONS: 
For cleaning instruments before sterilization - mix 1 part soap to 16 parts distilled water
For use as a shampoo or hand cleanser - use full strength
. For general use - mix 1 part soap to 8 parts distilled water

6.25" X 7" Dri Loc Pads
Available in a Box of 500 or Case of 2000.

Sterile Alcohol Prep Pads
Sterile alcohol prep pads saturated with 70% isopropyl alcohol
Gamma Sterilized
Latex Free

Marv Lerning Metro Shader

- CNC Cut One-Piece Iron Frame
- Black Oxide Finish
- Antiqued Workhorse Brass Hardware
- Black 1.25" 8 Wrap Coils
- Medium Speed with a Solid Hit
- Great All Around Shader
- Running 100-105 Hz @ 6.5V Unloaded
- Pushing 5's to 9's and Up
- Weighs 8 oz
- Handmade with care in New Zealand

4"x7" Dri Loc Pads
Available in a Box of 500 or Case of 2000.

DETTOL LIQUID FIRST AID ANTISEPTIC
- Proven safe and effective concentrated antiseptic disinfectant.
- Kills bacteria and provides protection against germs which can cause infection and illness.
- Use diluted for antiseptic wound cleansing for cuts, grazes, bites and stings.
- Ingredients: Chloroxylenol 4.8%

Bacitracin Ointment

Helps prevent infection in minor cuts, scrapes, and burns
Box of 144

Vitamin A&D Ointment Available in Foil Packs

- 1 Box of Foil Packs, 5-Gram, 144-Count. $11
- 1 Case, 6 boxes of Foils Packs, 5-Gram, 864 Count. $54

Kit Includes: SOBA’s Pilot frame, Shaders come with 1 pair of 8 wrap 1.25" coils and Liners come with 1 pair of 6 wrap 1.125" coils , appropriate armature bar, front and rear steel binding posts, contact screw, all washers including insulators, black, and magnetic steel shims, all screws, capacitor, cast iron wing nut, Allen wrench, and 2 sets of fully punched springs. Essentially everything needed to assemble a complete machine. Skills and instructions NOT included. MADE IN THE USA.

Marv Lerning Metro Liner

- CNC Cut One-Piece Iron Frame
- Black Oxide Finish
- Antiqued Workhorse Brass Hardware
- Black 1.25" 6 Wrap Coils
- Quick with a Good Hit
- Great All Around Liner
- Running 130-140 Hz @ 6.5V Unloaded
- Pushing 3's to 9's with Ease
- Weighs 7.2 oz
- Handmade with care in New Zealand

Marv Lerning 6 Shader classically inspired by the Waters Model 6 Frame

- CNC Cut One-Piece Iron Frame
- Red Oxide Finish
- Blackened and Antiqued Workhorse Hardware
- 1.25" 8 Wrap Coils with Black Gaffers Tape
- Medium Speed with a Hard Hit
- Great All Around Shader
- Running 100-105 Hz @ 6.5V Unloaded
- Pushing 5's to 13's no problem
- Weighs 7.2 oz
- Handmade with care in New Zealand

Marv Lerning 6 Liner classically inspired by the Waters Model 6 Frame

- CNC Cut One-Piece Iron Frame
- Red Oxide Finish
- Blackened and Antiqued Workhorse Hardware
- 1.25" 6 Wrap Coils with Black Gaffers Tape
- Quick with a Hard Hit
- Great All Around Liner
- Running 140-150 Hz @ 6.5V Unloaded
- Pushing 3's to 9's all day
- Weighs 6.4 oz
- Handmade with care in New Zealand

Limited Run of Seth Ciferri Version 2 Weiner Dog Machine Kits

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Weiner Dog V2 Frame
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar (liner or shader, depends on what you order)
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
- Wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
- Washer Package including all washers needed... (steel, fiber, and shims)

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

and we are proud to say that all parts are made in the USA.

thanks, good luck, and have fun with your new project!

seth c.