Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

Highlights:

• High-grade Aluminum body precision milled with a durable Black Anodize Finish
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
  
• Clipcord connection
• Vertical swing gate tube vice that will bite and hold all disposable and stainless tubes 
  
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
  

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
  
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
  
• Lightweight - a mere 4.5 oz
  

Made in the USA

New Mike Pike Smith & Howard Liner!

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a "Blackie Frame" for its association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

Highlights:

• Mini Pike S&H Frame CNC Cut from Iron Bars
  
• Black zinc frame finish with Deluxe Workhorse Blackened Hardware to match
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
• Long fluted armature speed bar
• Blackened steel binding posts
• 1" 8 Wrap Workhorse Coils

Specifications:

• Medium Speed with a Long Stroke and Hard Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 14s
  
• Weighs 6.4 oz

Made in the USA

Mike Pike Bullseye Liner with Swing Gate

Highlights: 

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Taped Coils

Specifications:

• Medium Speed with a Hard Hit
• Running 125 - 135 Hz @ 6.5V unloaded
• Pushing 3's-11's with ease
• Weighs 7.2 oz

Made in the USA

NEW Mini Version of Mike Pike's Mean Mugger Liner!

Highlights:

• Black Zinc Finished Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise guaranteed to lock tight on any tube

Specifications:

• Running 135-140 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 3's to 11's all day
• Weighs 7 oz
  

Made in the USA

NEW Mini Version of Mike Pike's Mean Mugger Shader!

Highlights:

• Black Zinc Finished Iron Frame
• Deluxe Blackened Hardware
• 1" Black Shrink Coils
  
• Swing Gate Vise guaranteed to lock tight on any tube

Specifications:

• Running 110-120 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 5's to 13's all day
• Weighs 7 oz

Made in the USA

Mike Pike Brass Jonesy Liner

Highlights:

• CNC Cut Billet Brass Frame with PIKE Stamp
• Deluxe Blackened Workhorse Hardware
• Over Under Rear Binder Setup
• Custom Designed Pike Vise
• 1" 8 Wrap Gaffers Taped Coils

Specifications

• Quick with a Solid Medium Hit
• Running 150 -160 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 Ounces
  

Made in the USA

Mike Pike Brass Jonesy Shader

Highlights:

• CNC Cut Billet Brass Frame with PIKE Stamp
• Deluxe Blackened Workhorse Hardware
• Over Under Rear Binder Setup
• Custom Designed Pike Vise
• " 8 Wrap Gaffer Taped Coils

Specifications:

• Fast Shader /Slow Liner with a Hard Hit
• Running 125 -130 Hz @ 6.5V Unloaded
• Pushing 5's-11's with Ease
• Weighs 8 Ounces

Made in the USA

Mike Pike Half Cup Liner

Highlights:

• CNC Cut Iron Frame with PIKE Stamp
• Workhorse Red Oxide Finish
• Standard Blackened Workhorse Hardware
• 1" 8 Wrap Black Heat Shrink Mini Coils

Specifications:

• Very Quick with a Medium Hit
• Running 145-155Hz @ 6.5 V unloaded
• Pushing 3's-9's Easy
• Weighs a mere 6.5 oz

Made in the USA

Mike Pike Half Cup Shader

Highlights:

• CNC Cut Iron Frame with PIKE Stamp
• Workhorse Red Oxide Finish
• Standard Blackened Workhorse Hardware
• 1" 8 Wrap Black Heat Shrink Mini Coils

Specifications:

• Shaders are Quick with a Hard Hit
• Running 100-105 Hz @ 6.5V unloaded
• Pushing 7's-15's Easy
• Weighs a mere 6.5 oz

Made in the USA

Mike Pike Clipper Power Liner

Clippers previously built by SOBA are now being built by Mike Pike as part of SOBA's partial machine retirement! Same quality, care, and performance that the Clipper has always possessed, put together by another one of our highly qualified builders.

Highlights:

• Built and Tuned Specifically for Large Grouping Liner Work
• Cast Iron Clipper Frame
• Hand Sanded and Cleaned up with a HD Black Powder Coat Finish
• Deluxe Black Hardware
• Soba 0.50" Wide Power A-bar
• 1.125" 6 Wrap Black Tape Coils

Specifications:

• Slow Speed with a Heavy Hit
• Pushing 7's to 18's Easy
• Running 115-120Hz @ 6.5 V Unloaded
• Weighs 8 oz 
  

Made in the USA

Mike Pike Large Mag Clipper Shader

Clippers previously built by SOBA are now being built by Mike Pike as part of SOBA's partial machine retirement! Same quality, care, and performance that the Clipper has always possessed, put together by another one of our highly qualified builders.

Highlights:

• Built and Tuned Specifically For Large Groupings
• Cast Iron Clipper Frame
• Hand Sanded and Cleaned up with HD Black Powder Coat Finish
• Deluxe Black Hardware
• Soba 0.50" Wide Power A-bar
• 1.25" 8 Wrap Black Taped Coils

Specifications:

• Slow Speed with a Real Heavy Hit
• 95-100 Hz at 6 V unloaded
  
• Pushing 7's to 25's No Problem
  
• Weighs 8 oz

Made in the USA

New Mike Pike x Cory Rogers Linear Rotary!

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Highlights:

• High-grade Aluminum body precision milled
• Available with Clip Cord or RCA connection option
• Custom Green Anodized Parts with Rainbow Glitter Powder Coated Frame, plus 24k Gold Plated Binders and Wingnut
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way

Specifications:

• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with needle on bar or cartridges
• Lightweight weighing in at a mere 4.5 oz
  

Made in the USA

Mike Pike Teacup Liner

Tough and versatile, this liner machine designed by Mike Pike is a true workhorse.

Highlights:

• Black Zinc CNC Cut Iron Frame
• 1 1/8" Deluxe 6 Wrap Coils with Gaffers Tape
• Deluxe Blackened Hardware
• Side Mount Rear Binder

Specifications:

• Running Quick and Steady with a Medium Hit
• 150-155Hz @ 6.5 V unloaded
• Pushing 3's to 9's all day long
  
• Weighs 7.3 oz
  
  

Made in the USA

Mike Pike Teacup Shader

Highlights:

• Black Zinc CNC Cut Iron Frame
  
• Standard Blackened Hex Hardware
• 1.25" Deluxe 8 Wrap Coils with Gaffers Tape

Specifications:

• Smooth with a Solid Hit, running 105-110 Hz @ 6.5 V unloaded
  
• Pushing 5's to 11's with ease
  
• Tough and Versatile, a true Workhorse
  
• Weighs 8.10 oz
  
  

Made in the USA