10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

 Special edition run of Power Supplies at special pricing!

NEW Deluxe Workhorse V3 Power Supply w/ Internal Battery and Metered Readouts!

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium-ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD SEAFOAM Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Workhorse Irons Dot Box

Small batch of Workhorse Dot Boxes now available!! After many requests we decided to do another small batch of these. Originally we made Dot Boxes about 10 years ago using Pulse Width Modulation to create intermittent power bursts for dot work. But we stopped making them after a few years when some others copied the design and outsourced overseas to make a cheap knock off version. 

This has been a fun side project we have been working on to help turn any coil machine into a dot machine for making Dotwork Tattoos using controlled intermittent power bursts. The Dot Box is simple and easy to use! It works in-line and plugs directly into your power supply in the clip cord hole and has a range of speed controlled by simply turning the delay knob.

Yes, there are many ways to do dots and if you have a strategy that works well for you already, more power to you! Our Dot Box is just a different approach, and if nothing else, a fun tool to play with, enjoy!

For Best Performance:

• The Dot Box works best with medium or slow, hard hitting liners....or any shader
• Quick and zippy light hitting machines are not as effective
• Best dots are made using Tight Rounds....Loose Rounds seem to blow out a little bit
• Some machines need to be turned up a Volt or two for better results
• Not recommended for use with Rotary machines...use with Rotary machines can damage the motor
• Timing of the tattoo machine when in use with the Dot Box will create various rhythms and patterns, adjust voltage and Dot Box Delay for varying performance and effect
• Match hand speed to the intermittent power bursts to ensure clean dot patterns.... if the Dot Box is at a slow setting you will need to move slower, fast setting move faster (duh).

*this is not a power supply, you will still need a power supply, the dot box simply plugs into your power supply.

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Workhorse Irons x Sidnaw Company Tattoo Machine Tool Roll!

After many years of discussion, some back and forth, and a few prototypes, our Tattoo Machine Tool Roll is here, and we couldn't be happier with the way they turned out!

Made locally by our friends at Sidnaw Company (formerly Mercy Supply), these Tool Rolls are made for use with the tools most artists use to maintain their tattoo machines. Designed for organization, versatility, and built for durability. Inside there are multiple slots and a large, gusseted pocket with an internal zippered front, plus two smaller button pockets for small parts and hardware. The body is made with 20oz waxed canvas.

Specs:

• Dimensions when closed: 11 x 6.5 x 2in
• 20oz USA 100% Cotton Waxed Canvas
• USA Harness Leather
• Steel Buckles
• Hand Hammered Copper Rivets
• USA YKK Zipper

Available With or Without Tools - if ordered with Tools the roll includes the following:

• Armature Bar Fixture
• Alignment Tool
• Wiss Spring Snips
• Wurth Premium Spring Punch
• Spring Stock (6 feet of 3/4" and 6 feet of 1/2")
• Hex and Torx Key Set (9/64 Allen Key, 5/64 Allen Key, T25 Torx Key, T20 Torx Key, T15 Torx Key)

Care:

• Our waxed canvas is simply a duck canvas with wax-impregnated cotton yarns. This results in a fabric that’s as strong as duck canvas with an added layer of protection against water, wind and agitation.

  Waxed canvas bags and garments can be used for months (even years) without requiring care. When caring for waxed canvas, avoid machine washing and submerging in water. Spot cleaning or hosing off the product is recommended. Hang dry only. Re-wax after prolonged use with an all-natural fabric wax to maintain weather resistance.

Handmade in Michigan.

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Specifications:

• CNC Cut Iron Frame
  
• Designed by Seth Ciferri
  
• Red Oxide Finish
• Geometry for 1" Coils
• Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
  

Made in the USA

Tattoo Nectar Full Spectrum Tattoo Cream 

Description:

The world's most versatile skin cream! Tattoo Nectar can be used during or after a tattoo. Our full spectrum CBD infused tattoo cream is formulated by tattooers to use as a substitute for petroleum based ointments like Vaseline, Aquaphor, and A&D. Our cream is great to layer on a new tattoo and is also a beneficial daily moisturizer that will keep the tattoo vibrant after its healed. Tattoo Nectar is gentle, calming, and soothing. Each of our handmade batches are third party lab-tested to ensure consistency - just scan the QR code included on the inside of our packaging to see for yourself.

INGREDIENTS:
Shea Butter, Hemp Oil, Almond Oil, Coconut Oil, Cetearyl Alcohol, & Full Spectrum CBD Oil.

1 oz tin- 250MG CBD 

1/4 oz tin- 63MG CBD

FDA DISCLOSURE You must be at least 18 years of age to legally purchase any CBD product. This product is for external use only and should be used only as directed on the label. Consult with a physician if you are pregnant or nursing, have a serious medical condition, or are using prescription medications. This product is tested to ensure it contains less than .3% THC.These statements have not been evaluated by the FDA. This product is not intended to diagnose, treat, cure or prevent any disease. By using this site you agree to follow the Privacy Policy and all Terms & Conditions printed on this site. Void Where Prohibited By Law. All trademarks and copyrights are property of their respective owners.

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

The Knuckle Duster model is one of SOBA's newer designs part of his Green Lion machine line and completely made in the Green Lion workshop!  Welded frame, 2 piece tube vise, hand made coil washers and coils!

Highlights:

• Welded Ductile Iron Frame 
  
• Custom SOBA Upright 
  
• Custom Mixed Green Powder Coat Finish
• Two Piece Vise 
• Deluxe Blackened Hardware
  
• Custom 1" 8 Wrap Coils with Custom Washers and Hand Embossed Covers
• Limited Edition Run

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
  
• Weighs 5.4 oz
  

Made in the USA

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Workhorse Model 6 Shader - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• HD Blue x Purple Powder Coat Faded Iron Frame 
• Deluxe 24K Gold Plated Hardware
• Matching 24k Gold Plated Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Gold Plated Silver Contact Screw w/ Matching Dice 
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 15s
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Workhorse Model 6 Liner - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Polished Nickel Frame
• Deluxe Nickel Workhorse Hardware
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Silver Contact Screw
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Workhorse Model 6 Shader - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Polished Nickel Frame
• Deluxe Nickel Workhorse Hardware
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Silver Contact Screw
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 15s
  
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA
  

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Mini Version of Mike Pike's Mean Mugger Liner!

Limited Edition Black Bronze

Highlights:

• Black Antiqued Bronze Plated Iron Frame
• Deluxe Blackened Hardware
• 1" Custom Baby Blue Coils
  
• Swing Gate Vise guaranteed to lock tight on any tube
  

Specifications:

• Medium Speed with a Solid Hit
• Pushing 3's to 11's all day
• Running 135-140 Hz @ 6.5 V unloaded
• Weighs 7 oz

Made in the USA

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Medium speed with enough power to push 3's to 14's no problem
• Tuned for all-day, every-day street shop and/or custom tattooing
• Runs about 130 Hz @ 6.5 Volts Unloaded, crank up to 7-8 Volts for large groupings
  
• 6.5 oz weight
  

Made in the USA

Workhorse Irons Umbrella! We have wanted to do these for years and finally pulled the trigger on running some. We had a bunch of these made end of last year as customer appreciation gifts for our top customers and added on some extras to offer this spring/summer. Staying dry has never looked so good. 

• High quality 54" umbrella designed to block rain and or sunshine
• Black with large format Workhorse Logo Print
• Push Button Auto Open with Manual Non-Auto Close
• Curved handle to fit in your hand well and not blow away or fall on the ground
• It is quite large, 54" is the size of most golf umbrellas if that helps
• It is definitely an umbrella, not much more to say.