Workhorse Armature Bar Grommets (100)

Offered in 3 different levels of hardness:

• White = Soft
• Black = Medium
• Clear = Hard

All Workhorse armature bars now available!

In the past we have reserved some of these specialty a-bars for only our builders, but per numerous requests we have now decided to open them up for anyone to use.

Precision milled from 1018 Steel; these are the same high quality bars our builders have used for years and continue to use on their Workhorse models as well as their various custom machines. Produced in house with quality and care.

Armature bars are listed in the order they appear in the picture from Left to Right.

Seth Ciferri Springs

Each Spring Set Includes: Fully punched front spring and rear spring

20 Gauge Liner Short Rear- Classic Liner, OG Micro Jones Liner, Modern Classic Liner

Liner - Fastback Liner, Kung Fu Grip Owen Liner

Liner Medium - Weiner Dog Liner V2.0, Weiner Dog Liner V2.1, Belmont Liner, Chopped Micro Jones Liner, Micro Jones Liner

Shader Long Front - Kung Fu Grip Owen Shader, Fastback Shader

Shader Short Rear - Weiner Dog Shader V2.0, Weiner Dog Shader 2.1, Classic Shader, Modern Classic Shader, Micro Jones Shader

Stainless Steel Liner Forked Rear- Seth Ciferri Mini Fastback Liner

Liner Medium Stainless Steel Forked Rear- Belmont, Weiner Dog Liner (2.0, 2.1,2.2), and Micro Jones Liner

Stainless Steel Liner- Supreme Liners

Narrow Stainless Steel Rear Liner- Doorbell Liners

SOBA Springs

Each Spring Set Includes: Fully punched front and rear spring. 

Liner Spring Set - Mini Rusto Liner, Speedballer Liner, Mini Clipper Liner
20 Gauge Short Rear Set - Pilot Liner Standard/Kung Fu, Iron Rusto Power Liner
Shader Short Rear Set - OG Brass B&G Walker Shader
Shader Medium Set - Mini Rusto Shader, Large Mag Clipper Shader, B&G Racehorse Shader
Shader Short Set - Mini Clipper Shader

Shader Long Set - Pilot Shader Standard/Kung Fu

Soldered 8 Wrap Coils

8 layer coils hand wrapped, soldered with 47 uf capacitor and lugs. 

Available as either 1" Mini Coils, 1.125" or 1.25" Full Size Coils

Deluxe Workhorse Armature Bar Fixture Set!

This is a very simple, yet effective tool used by our builders and many others. The perfect tool to easily attach springs to your a-bar while ensuring all parts are kept parallel and straight.

Deluxe Fixture works for 1/2" rear springs. It comes with or without our high-quality alignment tool and comes standard with a hole in the base to hold the tool and use the fixture as a machine stand, freeing up both hands for repairs.

Armature Bar Fixture Specs:

• Hardened Steel Base and Top Brackets to Ensure Years of Use 
• Standard 1/2" Wide Slot for Rear Springs
• Standard 3/8" Wide Slot For Armature Bars
• 1" x 3" Overall Part Dimensions
• Insert Alignment Tool in hole to use as a stand to help hold your machine while working on it

Alignment Tool Specs:

• 5/16" x 3.5" Stainless Bar
• Knurled Grip
• Armature Bar Nipple Slot on the top for alignment use
• Armature Bar Groove inside for tweaking / turning your a-bar if necessary.... we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.

Additionally:

• These are must haves for machine building and machine repair
• As always, all parts made in the USA
• Skills nor machine are included, sorry
  

Mike Pike Springs

Each Spring Set includes fully punched front and rear spring.

Liner Spring Set - S&H Liner, Half Cup Liner, Mean Mugger Liner, Tea Cup Liner
Liner Medium Spring Set - Brass Jonesy Liner
Shader Long Spring Set - Tea Cup Shader
Shader Medium Spring Set - Brass Jonesy Shader.
Shader Short Spring Set - Half Cup Shader, S&H Shader
Shader Short Medium Spring Set - Mean Mugger Shader

Aaron Cain Springs

Each spring set includes fully punched 18 gauge front and rear springs. 

Aaron Cain Liner Spring Set: All Aaron Cain Liners
Aaron Cain Shader Spring Set: All Aaron Cain Shaders
Aaron Cain 5brid Spring Set: Aaron Cain 5brid Liner/Shader

Workhorse Thumbscrews

Here they are, all of our available thumbscrews that our builders typically use on Workhorse machines and customs.

Black Thumbscrews are laser cut steel welded on 8-32 blackened precision screws and each include two black steel washers.

Workhorse Coin Thumbscrews are made from custom stamped brass Workhorse coins welded on 8-32 blackened precision screws and each include two black steel washers. 

Key Thumbscrews are made from old brass keys that we cut and then weld on 8-32 blackened precision screws and include two black steel washers. *May vary from picture, each key is different, no two thumbscrews are the same.

Small O-Rings

Ideal for use as spacers on Armature Bar nipples. Also applicable for use on Dan Kubin Sidewinder Armatures to silence them. Softer than standard Buna-N O-rings for a better seal in low-pressure applications, these are also resilient and offer excellent tear resistance. They resist hydraulic oils and motor oil. These O-rings have a round profile and are suitable for a wide range of static and dynamic sealing applications.

5/64 ID, 13/64 OD. 50A Soft Durometer.

Available in 10 packs or 100 packs.

Adam Ciferri Springs

Each spring set includes fully punched 18 gauge front and rear springs. 

Adam Ciferri Liner Spring Set: Pitbull Liner, Ghost Dog Liner
Adam Ciferri Shader Spring Set: Bulldog Shader, Ghost Dog Shader

Ghost Dog Revival Spring - For the Dan Kubin X Adam Ciferri Ghost Dog Revival

Dan Kubin Springs

Stainless Steel V3r "23 / 24" Sidewinder Spring- New stainless steel main spring for all "23" and "24" model sidewinders. 

Stainless Steel V3r Sidewinder Spring - Updated spring used on 2020 to 2022 sidewinders. Slightly different shape with a flat rear end of the spring. Also used on V7 Sidewinders under the armature bar to catch the impact pin at top end of up stroke. 

OG Sidewinder Spring - From the original V3R sidewinder (2019-2020). Used for both the pivoting and rear stoke spring.  Also can be used for v3, v4, and v5. Original rounded rear end of the spring.

Ghost Dog Revival Spring - For the Dan Kubin X Adam Ciferri Ghost Dog Revival. Stainless steel front and backer spring included.

The official Seth Ciferri "build it your fucking self" tattoo machine kit.

Includes everything needed to build a nice tattoo machine... (mojo not included)

Components:

• New "fastback" walker-style frame in iron - liner or shader. these new castings feature improved geometry, tighter tolerances, a more user-friendly surface finish, and nice big "PDX,OR" (Portland Oregon, for those who don't know) cast on the interior of the frame upright; to let folks know it's the real deal, and from whence it came... 
  
• Coil set with capacitor and lugs - (iron liners come with 1.25" 6 wrap. iron shaders come with 1.25" 8 wrap.) 
  
• Armature bar (liner or shader, depends on what you order) 
  
• Spring set 
  
• All screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
  
• Insulator package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
  
• Our beautiful new steel binding posts and Chris Smith copper contact screw. (exclusive to us. unavailable from any other builder or supplier) 
  
• Washer package - includes all washers needed... (black, fiber, shims, and lock) 
  
• Wrenches (since the kit utilizes TORX screws, including the T25 and T15 wrenches needed to handle them.) 
  
• Full guarantee on the quality of all parts

NOTE: I cannot and will not be available to offer ANY building or tuning advice for these kits. These include all of the same parts I use to build my production machines, and the quality is above and beyond anything I've used or offered in the past.

We are proud to say that all parts are made in the USA.
Thanks, good luck, and have fun with your new project!
Seth C.

Spring Stock - 6 Feet

6 Feet of Blue Tempered Spring Steel. 1/2" or 3/4" wide by .018 thick