Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse x Sidnaw Company Tattoo Machine Tool Roll
Workhorse Irons

Workhorse x Sidnaw Company Tattoo Machine Tool Roll

$330.00 USD
Grouping Price Inventory Quanity
Tool Roll with Tools $330.00 USD Available
Tool Roll Only (No Tools) $195.00 USD Available

Workhorse Irons x Sidnaw Company Tattoo Machine Tool Roll!

After many years of discussion, some back and forth, and a few prototypes, our Tattoo Machine Tool Roll is here and we couldn't be happier with the way they turned out!

Made locally by our friends at Sidnaw Company (formerly Mercy Supply), these Tool Rolls are made for use with the tools most artists use to maintain their tattoo machines. Designed for organization, versatility, and built for durability. Inside there are multiple slots and a large gusseted pocket with an internal zippered front, plus two smaller button pockets for small parts and hardware. The body is made with 20oz waxed canvas.

Specs:

  • Dimensions when closed: 11 x 6.5 x 2in
  • 20oz USA 100% Cotton Waxed Canvas
  • USA Harness Leather
  • Steel Buckles
  • Hand Hammered Copper Rivets
  • USA YKK Zipper

 

Available With or Without Tools - if ordered with Tools the roll includes the following:

  • Armature Bar Fixture
  • Alignment Tool
  • Wiss Spring Snips
  • Wurth Premium Spring Punch
  • Spring Stock ( 6 feet of 3/4" and 6 feet of 1/2")
  • Hex and Torx Key Set (9/64 Allen Key, 5/64 Allen Key, T25 Torx Key, T20 Torx Key, T15 Torx Key)

Care:

 

  • Our waxed canvas is simply a duck canvas with wax-impregnated cotton yarns. This results in a fabric that’s as strong as duck canvas with an added layer of protection against water, wind and agitation.

    Waxed canvas bags and garments can be used for months (even years) without requiring care. When caring for waxed canvas, avoid machine washing and submerging in water. Spot cleaning or hosing off the product is recommended. Hang dry only. Re-wax after prolonged use with an all-natural fabric wax to maintain weather resistance.

    •  

    Handmade in Michigan.

    You may also like

    Sold Out
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Workhorse Irons
    $105.00 USD
    PREVIEW
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Workhorse Irons
    $65.00 USD
    PREVIEW
    Josh Bowers Weighted Thumbscrew
    Josh Bowers Weighted Thumbscrew
    Workhorse Irons
    $20.00 USD
    PREVIEW
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse Irons
    from $99.00 USD
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Seth Ciferri IRON Mini Flatside Frame
    Workhorse Irons

    Seth Ciferri IRON Mini Flatside Frame

    $105.00 USD

    Seth Ciferri Mini Flatside Frame

    • CNC Cut Iron Liner Frame
    • Designed by Seth Ciferri
    • Black Oxide Finish
    • Geometry for 1" Coils
    • Forward Facing Guillotine Vise
    • Vise Parts Included
    • Weighs 2.9 oz


    Made in the USA

    Customer Reviews

    Based on 1 review Write a review
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Dan Kubin Needle Bar Tensioner - V3R Upgrade
    Workhorse Irons

    Dan Kubin Needle Bar Tensioner - V3R Upgrade

    $65.00 USD

    Dan Kubin Needle Bar Tensioner

    The most significant update to the V3/24 Sidewinder is the added (and optional) Needle Bar Tensioner. This added Tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. 

    The V3/24 Tensioner can be used on all versions of Dan Kubin V3Rs, 2019 to 2024. 

    Needle Bar Tensioner Specifications:

    • Lightweight Aerospace Aluminum Arm with precision made custom bearing
    • Creates necessary needle bar tension for stability, eliminating the need to use a Rubber Band
    • Moves forward and backwards, in and out of position easily by loosening and tightening the thumbscrew
    • When setting up your needle and tube, position Needle Tensioner in desired position depending on the amount of tension you want to add to the needle bar. 
    • Adjust position by loosening the thumbscrew, pull arm back and then tighten when you reach desired tension. 

    Upgrade Step by Step: 

    1. Loosen and remove the thumbscrew
    2. Insert thumbscrew into hole in Needle Bar Tensioner
    3. Re-insert thumbscrew into frame with Tensioner bearing facing inwards (see picture)
    4. Ensure Vise Slide is in correct position so the thumbscrew easily threads into Slide
    5. Tighten with Needle Bar Tensioner in desired position

    **OG V3R and V3/23 SPECIAL NOTE - Use of this Tensioner instead of Rubber Bands will noticeably increase the strength of your machine. If it is hitting too hard using the Needle Bar Tensioner, simply adjust your voltage and turn the machine down and adjust stroke wheel setting as needed to accomplish desired speed / hit. 

     

    Josh Bowers Weighted Thumbscrew
    Josh Bowers Weighted Thumbscrew
    Josh Bowers Weighted Thumbscrew
    Josh Bowers Weighted Thumbscrew
    Workhorse Irons

    Josh Bowers Weighted Thumbscrew

    $20.00 USD

    These turned and knurled brass thumb screws add weight to the front of your machine helping with balance, vibration and needle penetration. Drilled and tapped 8-32 on the edge and through the center to give you two mounting options, they will replace most standard wing nuts. Adding weight to the front of the machine allows the needle to push against that mass as it drives down to the skin, giving you an advantage for more solid, stable lines and allowing you to not have to hold your machine so tight.

    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse A1 Slideback Tattoo Machine Frame
    Workhorse Irons

    Workhorse A1 Slideback Tattoo Machine Frame

    $99.00 USD
    Grouping Price Inventory Quanity
    Single Frame $99.00 USD Available
    10 Pack $915.00 USD Available

    Workhorse A1 Slideback Tattoo Machine Frame

    • CNC Cut Iron Frame
    • Designed by Mike Pike, modeled off a classic A1 Tattoo Machine
    • Raw Finish ready for paint, powder coat, plating or oxide
    • Geometry for 1.25" Coil Liner or Shader
    • Swing Gate Vise with extra screws to work with 1.25" coils or with a yoke and 1" coils
    • Weighs 2.8 oz

    Frame and Swing Gate Vise parts only, no other parts or tools included.


    Made in the USA

    Customer Reviews

    Based on 1 review Write a review
    Model 6 Liner Frame
    Model 6 Liner Frame
    Model 6 Liner Frame
    Model 6 Liner Frame
    Workhorse Irons

    Model 6 Liner Frame

    $92.00 USD
    Grouping Price Inventory Quanity
    Single Frame $92.00 USD Sold Out
    10 Pack $850.00 USD Sold Out

    Model 6 Liner Frame

    • CNC Cut Iron Liner Frame
    • Designed by Marv Lerning, inspired by the classic Waters Model 6
    • Black Zinc Finish
    • Geometry for 1.25" Coils
    • Standard Pinch Vise
    • Weighs 2.9 oz

    Made in the USA

    Customer Reviews

    Based on 1 review Write a review
    Next: Dan Kubin Weighted Impact Screw Kit
    Back to Tattoo Hardware Parts
    Next: Dan Kubin Weighted Impact Screw Kit

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    C
    Charles Balch
    Good old fashioned quality tools.

    Your kid’s kids could be cutting springs and tuning tattoo machines with these tools if properly cared for. Tool roll is well thought out and quality built. My only gripe is the Allen keys being loose individual pieces, could use a key ring or something to keep them all together.

    T
    Tyler Morales

    Sick