Shim Pack

Pack of 25

Available in 10 Shims or 5 Shims

Hex and Torx Key Set

Includes 1 of each of the following: 

9/64 Allen Key

5/64 Allen Key

1/16" Allen Key

T20 Torx Key

T15 Torx Key

1.55 MM Allen Key

Hex L Key .5"

Dan Kubin Replacement Accessory Kit

Components:

• 1.5MM Allen Key
• 5/64" Hex Key
• Taper Pin (used to open up/ensure your needle bar loop is the correct size)
  
• Dan Kubin Universal Sidewinder Spring
• 20 Dan Kubin Perfect Nipples

Workhorse Standard Rebuild Kit

With enough hardware to rebuild 2 machines, this kit includes: 

• 1 Pair 8 Wrap Coils 
  
• 1 Pair Mini 8 Wrap Coils 
  
• 2 Coil Kits 
  
• 2 Binding Post Sets 
  
• 1 Liner Medium A-Bar (1 5/8" Bar, 1/4" Nipple, 11 grams) 
  
• 1 Shader Short A-Bar (1 1/2" Bar, 1/4" Nipple, 13 grams) 
  
• 1 Replacement Tube Vise 
  
• 2 Screw Kits 
  
• 20 Black Washers 
  
• 10 Nylon Beads 
  
• 2 Soba Shader Spring Sets 
  
• 2 Soba Liner Spring Sets 
  
• 1 Hardware Storage Box

Coil Kit

Includes capacitor, 5 10 shims, 2 3/8" screws, wire insulation and solder lugs.

Deluxe Rebuild Kit includes:
- 2 Pair of Workhorse 8 Wrap 1.25" Coils
- 2 Pair of Workhorse Mini 8 Wrap 1" Coils
- 2 Replacement Tube Vices
- 4 Binding Post Sets
- 40 Black Washers
- 20 Nylon Beads
- 4 Screw Kits (16 - 1/2", 8 - 1/4", 4 - 1", 4 Antiqued Wing Nuts, 1 - 9/64" Allen Wrench)
- 1 Deluxe Spring Set: 9 Rears (3 0.015, 3 0.018, 3 0.02) plus 18 Fronts - 6 Short, 6 Medium, and 6 Long (2 0.015, 2 0.018, 2 0.02 of each length)
- 2 Workhorse Shader Short Armature Bars (1 1/2" Bar, 1/4" Nipple)
- 2 Workhorse Liner Medium Armature Bars (1 5/8" Bar, 1/4" Nipple)
- 4 Coil Kits (4 Capacitors, 20 Shims, 8 - 3/8" Screws, 8 Solder Lugs, 4 feet of Wire Insulator)
- 1 Organizer Box

Discount price saves you $60 in hardware.

Workhorse A1 Slideback Tattoo Machine Frame

Components:

• CNC Cut Iron Frame
  
• Designed by Mike Pike, modeled off a classic A1 Tattoo Machine
  
• Raw Finish ready for paint, powder coat, plating or oxide
  
• Geometry for 1.25" Coil Liner or Shader
  
• Swing Gate Vise with extra screws to work with 1.25" coils or with a yoke and 1" coils
  
• Weighs 2.8 oz

*Frame and Swing Gate Vise parts only, no other parts or tools included.

Made in the USA