Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord!

• Durable anodized finish that helps prevent corrosion.
• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics.
• Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
• O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

• Recommended voltage range: 4 - 6.5 volts
• Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

Made in the USA!

All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Dan Kubin Sidewinder v7.5

24k gold plated frame and parts with a black side plate.

Once you understand how these run, it’s simple.

Set your stroke. Set your voltage.
Then use the rear knob to adjust your hit — softer or harder, on the fly.

That’s it.

Designed for linework — though some run them for shading and color packing as well.

Highlights:

• 24k Gold Plated Frame and Hardware with Light Pink Side Plate.
• Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
• Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
• Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
• More prominent timing marks on the side plate for the impact pin.  (for advanced tuning/stroke adjustment, this helps with being more intuitive)
• Cleaner sound/better acoustics.
• Side locking screw is positioned to secure the impact screw most effectively

Specifications:

• Forward, low and balanced weight of 6.2 oz
• Recommended voltage range: 4 - 6.5
• Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
• It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length.  You can simply adjust the return spring tension on the fly throughout the tattoo.  

Made in the USA!

All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Dan Kubin's Newest Sidewinder, the V46er! 

• Antique Nickel Plated Frame and Matching Motor Cover with Blackened Deluxe DK Components.
• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics.
• Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
• O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

• Weighs 6 oz
  
• Recommended voltage range: 4 - 6.5 volts
• Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord Connection!

* Finish may vary

• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics. 
  
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

• Weights 6oz
• Recommended voltage range: 4 - 6.5 volts
• Approximate stroke range: 2 - 4mm (Keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)