Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Dan Kubin Mojobox V2.2 - Distressed Light Pink
Workhorse Irons

Dan Kubin Mojobox V2.2 - Distressed Light Pink

$870.00 USD $795.00 USD

 **NEW DK Pricing - Starting October 1st we shifted all Dan Kubin machine pricing lower! Thanks to Dan for some clever engineering and milling updates / investments, we are now able to shift all DK pricing down. Times are tough and tariffs are crazy right now...thankfully we produce all DK machines in the USA and have the ability to pass the savings onto our customers. 

Dan Kubin Mojobox V2.2

Newly remastered, this is the 2nd variant of the 2nd generation of the Mojobox. New spring setup that enhances performance, punch, adjustability, and makes it more cartridge friendly!

Now with more versatility and ease of hit adjustment throughout the tattoo. It is more ergonomic, more reliable, and most of all, more performance focused than its predecessor. It is a punchy coil like machine with the reliability and ergonomics of a rotary.

Highlights:

  • Brass Frame with Distressed Chalk Pink HD Finish
  • Numbered upstroke wheel (same as the V3r). The higher the number, the harder it will hit.  *Please use common sense & not run it on high volts with a high setting on the upstroke wheel.
  • Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive which is the nature of a cartridge.

Specifications:

  • Normal operating range: 5.3 - 6 volts for lining, 4 - 5.5 volts for shading.
  • Excellent for fine line, black and grey, color packing with any size mag.
  • Can drive 14 liners, if you prefer to “set the needle into the skin”
  • Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive, which is the nature of a cartridge.
  • Weight: 5 oz

Made in the USA!

All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.




Customer Reviews

Based on 2 reviews Write a review

You may also like

Save $85.00 USD
PREVIEW
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Workhorse Irons
$1,100.00 USD $1,015.00 USD
Save $75.00 USD
PREVIEW
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
Workhorse Irons
$425.00 USD $350.00 USD
Sold Out
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Workhorse Irons
$500.00 USD $375.00 USD
Sold Out
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Workhorse Irons
$500.00 USD $375.00 USD
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord
Workhorse Irons

Dan Kubin Sidewinder 46er - Verdigris x Gold RCA + Clip Cord

$1,100.00 USD $1,015.00 USD

**NEW DK Pricing - Starting October 1st we shifted all Dan Kubin machine pricing lower! Thanks to Dan for some clever engineering and milling updates / investments, we are now able to shift all DK pricing down. Times are tough and tariffs are crazy right now...thankfully we produce all DK machines in the USA and have the ability to pass the savings onto our customers. 

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord Connection!

New Limited Run of Light Green Verdigris! Much greener than the standard Verdigris. *
* Finish may vary
The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

Highlights:
  • Wider springs for more durability.
  • Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
  • Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
  • Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
  • Smooth, easy clamping tube vice.
  • Forward weight distribution for better ergonomics. 
  • Reliable Mabuchi motor. -because they run forever without losing consistency. 
Specifications:
  • Weights 6oz
  • Recommended voltage range: 4 - 6.5 volts
  • Approximate stroke range: 2 - 4mm (Keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

  • RCA version is wired for the harder hit mode only using RCA connection
  • This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
  • This will also work good with a right-angle RCA cord.
  • Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
  • The position of the battery makes the machine’s balance point much more forward, like a pen.
  • NEW RCA / Clip cord version with straight up battery position 

Made in the USA!

All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Customer Reviews

Based on 2 reviews Write a review
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
SOBA B&G Race Horse Shader - Purple Scale
Workhorse Irons

SOBA B&G Race Horse Shader - Purple Scale

$425.00 USD $350.00 USD

New Limited Run of B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Highlights:

  • Purple Anodized and Laser Etched Featherweight Aluminum Frame
  • Swing Gate Vise guaranteed to lock tight
  • Deluxe Black Hardware
  • 8 Wrap 1" Custom Fish Scale Coils

Specifications:

  • Super Smooth for B&G, Soft and Quick for Building Layers
  • 115-120 Hz at 6.5 V unloaded
  • Weighs 5.4 oz

Made in the USA

Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Eddy Deutsche Blade Runner Shader - Baby Blue x Black
Workhorse Irons

Eddy Deutsche Blade Runner Shader - Baby Blue x Black

$500.00 USD $375.00 USD

Eddy Deutsche Blade Runner Shader!

Highlights:

  • Precision Machined Iron Frame Designed by Eddy Deutsche
  • Black Long Nipple A Bar
  • Custom HD Baby Blue Powder Coat
  • Deluxe Blackened Hardware plus pure Matching Dice Copper Contact
  • Custom Hand Wound 8 Wrap Natural Phenolic Coils

Specifications:

  • Medium Speed with a Solid Hit
  • Designed to run like Eddy tattoos
  • Running around 110-115 Hz Unloaded at 6.5V
  • Great for fast color packing with 5s to 13s, turn up for 15s
  • Weighs about 7 oz

Made in the USA

Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Eddy Deutsche Blade Runner Liner - Baby Blue x Black
Workhorse Irons

Eddy Deutsche Blade Runner Liner - Baby Blue x Black

$500.00 USD $375.00 USD

Eddy Deutsche Blade Runner Liner!

Highlights:

  • Precision Machined Iron Frame Designed by Eddy Deutsche
  • Black Long Nipple A Bar
  • Custom HD Baby Blue Powder Coat
  • Deluxe Blackened Hardware plus pure Matching Dice Copper Contact
  • Custom Hand Wound 8 Wrap Natural Phenolic Coils

Specifications:

  • Medium Speed with a Solid Hit
  • Designed to run like Eddy tattoos
  • Running around 130-135 Hz Unloaded at 6.5V
  • Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
  • Weighs about 7 oz

Made in the USA

Customer Reviews

Based on 1 review Write a review
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Mike Pike x Destroy Troy Teacup Liner- Hell Horse
Workhorse Irons

Mike Pike x Destroy Troy Teacup Liner- Hell Horse

$395.00 USD

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Teacup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

  • Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
  • Etched Destroy Troy Horse + Light-Up Red Eye
  • Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
  • Black Destroy Troy Cray Bar with added weight on the front end
  • Green Anodized and Polished Aluminum Frame
  • Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  • All Black Hardware
  • Stainless Springs
  • Custom 8 Wrap Black Wire 1.125" Coils

Specifications:

  • Medium Speed with a Solid Hit
  • Running around 135 Hz Unloaded at 6.5V
  • Great for use with 3s to 9s, turn up for 11s
  • 7.5 oz Forward Weighted Machine

Made in the USA

Next: Eddy Deutsche Blade Runner Shader - Red x Gold
Back to Tattoo Machines
Next: Eddy Deutsche Blade Runner Shader - Red x Gold

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)