NEW Dan Kubin V3/23 Sidewinder!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

Machine Specs:

• 24k Gold Plated ALUMINUM Frame and Motor Cover with 24k Gold Plated Hardware (*Finish may vary)
• Featherweight Aluminum version provides the same performance weighing in a couple ounces less than the Brass version at about 3.9 ounces
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

Cory Rogers Custom One-Off Liner

• Custom Welded Frame
  
• Dated 2022, brand new, just sat in our storefront since last year
• Raw Torched Heat Blue Finish
  
• Matching and Brass Deluxe Hardware
• 8 Wrap 1.125" Custom Coils
  
• Slow Speed with a Solid Hit and Long Stroke
  
• Great Shader for Color Packing Traditional Work
  
• 105 Hz @ 6.5 V unloaded
• Pushes 5s to 11s all day
  
• MADE IN THE USA

Cory Rogers Custom One-Off Liner

• Custom Welded Frame with Engraved Spider Web
  
• Raw Torched Heat Blue Finish
  
• Matching and Brass Deluxe Hardware
• 8 Wrap 1.125" Custom Coils
  
• Slow Speed with a Solid Hit and Long Stroke
  
• Great Shader for Color Packing Traditional Work
  
• 100 Hz @ 6.5 V unloaded
• Pushes 5s to 13s all day
  
• MADE IN THE USA

Cory Rogers Custom One-Off Liner

• Custom Welded Frame
  
• Baby Blue Finish with Royal Blue Burst
  
• Matching and Brass Deluxe Hardware
• 8 Wrap 1" Custom Coils
  
• Medium Speed with a Solid Hit
• Great Liner for Traditional Work
  
• 135 Hz @ 6.5 V unloaded
• Pushes 5s to 11s with Ease
• MADE IN THE USA

Cory Rogers Custom One-Off Liner

• CNC Cut Iron Frame with custom Welded Support
  
• Custom Chartreuse and Red Finish
  
• Matching and Brass Deluxe Hardware
• 8 Wrap 1" Custom Coils
  
• Medium Quick Speed with a Solid Hit
• Great Liner for Traditional Work
  
• 140 Hz @ 6 V unloaded
• Pushes 5s to 11s with Ease
• MADE IN THE USA

Limited Edition Cory Rogers Metro Liner

• CNC Cut Iron Marv Lerning Metro Liner Frame
  
• Custom SeafoamPowder Coat with Black Burst (finishes vary)
  
• Laser Etched Custom Cory Roger Skull
• Blackened Deluxe Workhorse Hardware
• 6 Wrap 1.25" Custom Coils with Custom Cut Cory Rogers Coil Washers
  
• Medium Speed with a Solid Hit
• Great Liner for Traditional Work with 3s to 9s
• 130-135 Hz @ 6 V unloaded
• Pushes 5s to 14s with Ease
• MADE IN THE USA

Limited Edition Cory Rogers Metro Liner

• CNC Cut Iron Marv Lerning Metro Liner Frame
  
• Custom Ugly Green Powder Coat with Hot Pink Burst (finishes vary)
  
• Laser Etched Custom Cory Roger Skull
• Blackened Deluxe Workhorse Hardware
• 6 Wrap 1.25" Custom Coils with Custom Cut Cory Rogers Coil Washers
  
• Medium Speed with a Solid Hit
• Great Liner for Traditional Work with 3s to 9s
• 130-135 Hz @ 6 V unloaded
• Pushes 5s to 14s with Ease
• MADE IN THE USA

Limited Mike Pike x Destroy Troy Teacup Liner - Hasbulla ("Mini Khabib")

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Destroy Troy Warp Drive Cray Bar
  
• Custom Matching Fish Scale Coils
  
• Custom Cut Destroy Troy x Mike Pike Coil Washers
• Sour Apple Powder Coated Aluminum Frame
• 24k Gold Plated Destroy Troy Forward-Weighted Vise Guillotine Vise
  
• Deluxe Gold Plated and Blackened Hardware and Spring Shelf Yoke for Superior Connectivity

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

New SOBA V2 Mini Clipper Liner! Limited Edition Lime Green x 24k Gold

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

- CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
- Anodized Satin Lime Green Finish
- Heavy Weight Brass Vise and Thumbscrew with 24k Gold Plated Finish
- Matching 24k Gold Hardware plus Custom Drop Down Rear Binder
- 1" 8 Wrap Custom Matching Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 5's to 14's All Day
- Running 130-135 Hz @ 6.5 V Unloaded
- Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
- MADE IN THE USA

New SOBA V2 Mini Clipper Liner! Limited Edition Olive Green x Ugly Green

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

- CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
- Anodized Satin Olive Green Finish
- Heavy Weight Brass Vise and Thumbscrew with Ugly Green Powder Coated Finish
- Matching Ugly Green Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder
- 1" 8 Wrap Custom Matching Powder Coated Embossed Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 5's to 14's All Day
- Running 130-135 Hz @ 6.5 V Unloaded
- Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
- MADE IN THE USA

Limited Eddy Deutsche Blade Runner Shaders!

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Magic Purple Powder Coat Finish
  
• Custom Hand Wound 8 Wrap Coils with Custom Eddy D 222 Coil Washers
  
• Nickel Plated Deluxe Hardware
  
• Pure Silver Contact
  
• Eddy Deutsche Magic

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 110-115 Hz Unloaded at 6.5 - 7.5 V
• Great for fast color packing with 5s to 13s, turn up for 15s
• Made in the USA

Limited Eddy Deutsche Blade Runner Liners!

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Magic Purple Powder Coat Finish
  
• Custom Hand Wound 6 Wrap Coils with Custom Eddy D 222 Coil Washers
  
• Nickel Plated Deluxe Hardware
  
• Pure Silver Contact
  
• Eddy Deutsche Magic

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 130-135 Hz Unloaded at 6.5 - 7.5 Volts
  
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
• Made in the USA

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Rubbed Bronze Plated Finish
• Deluxe DK Black Hardware and Stainless Spring
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Nickel Plated Finish
• Deluxe DK Nickel Plated Hardware and Stainless Spring
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

*New V3 Pitbull Liner! New vise and new color, nothing else to update, these machines are great! Long stoke, medium speed with a heavy hit to push anything easily. Now with swing gate vise guaranteed to lock down tight on any and every tube. 

Adam Ciferri Pitbull Liner

Specifications:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Heavy hit that easily pushes 5's to 11's
- Runs 125-130z @ 6.5 Volts Unloaded
- CNC Milled Iron Frame with Swing Gate Vise
- Custom HD Black Finish
- Workhorse Blackened Hardware
- 1.125" 8 Wrap Coils with Black Heat Shrink
- Weighing in at 6.4 ounces
- MADE IN THE USA

A few words from Adam on his history with this machine:
"I think most of you know that I've been making a version of this machine since about 1999, but, I don't know how many of you really know the story of how this machine came to be…

In mid 1999, the first Pitbull outliners were made by chopping down some bulldog shaders. They ran a bit slow and punchy for what I'd call an outliner, but, they definitely did the job. Over the years, there have been a few iterations of this machine, and almost all of them were based on, basically, cutting up a shader and, either making due with the geometry, or adjusting the geometry.

What we have here is the new version I designed for Workhorse Irons. This machine is based on the dedicated geometry that I've wanted for this machine since, just about, day one. It lends itself to a few different liner configurations without needing to apply any hocus-pocus. Small groupings? Sure. Medium groupings? Yes. Big, fat, ig'nunt-ass outlines? Fuck yeah-continually, since 1999! This machine has a great range, but is basically set up to make big fucking outlines, quickly."
Respectfully, Adam C