• Black CNC Cut Ductile Iron Base with Swing Gate Vise
• Custom Matte Grape Anodized Aluminum Frame
  
• Deluxe Blackened Hardware
• Custom 1" 8 Wrap Reflective Coils
• Medium Speed with a Solid Hit
• Pushing 5's to 11's no problem
  
• Running 125 Hz @ 6.5 V Unloaded
• Weighs in at 5.65 oz
• MADE IN THE USA

• Black CNC Cut Ductile Iron Base with Swing Gate Vise
• Custom Green Anodized Aluminum Frame with Laser Etched Pot Leaf Pattern
  
• Deluxe Blackened Hardware
• Custom 1" 8 Wrap Reflective Coils
• Medium Speed with a Solid Hit
• Pushing 5's to 11's no problem
  
• Running 125 Hz @ 6.5 V Unloaded
• Weighs in at 5.65 oz
• MADE IN THE USA

• Black CNC Cut Ductile Iron Base with Swing Gate Vise
• Custom Green Anodized Aluminum Frame with Laser Etched Pot Leaf Pattern
  
• Deluxe Blackened Hardware
• Custom 1" 8 Wrap Reflective Coils
• Medium Speed with a Solid Hit
• Pushing 5's to 9's no problem
  
• Running 135 Hz @ 6.5 V Unloaded
• Weighs in at 5.65 oz
• MADE IN THE USA

Introducing the Steeldriver. After over a year of design and testing the Steeldriver is ready. It has proven to be an incredibly capable liner and shader with cartridges and needle tube setup. The stroke characteristics of the Steeldriver are different than the other Bowers models in that it takes the stroke philosophy and mechanical give to the next level. The Steeldriver is more snappy off the tip than any other Bowers machine, it still has that mechanical give that keeps you from feeling like you’re skating on thin ice when lining but it’s ability to drop in lines and color equally well off the tip, middle and back of the stroke are second to none.

The Steeldriver design builds off the phenomenon of the cam quarters as mentioned in my book “The Right Tool For The Job”. This is where I explain that rotary machines have a tendency to want to push skin away from the needles as they are coming down because the needles are slowing down on that last quarter of the cams rotation. Rather than punching the needles in like a coil machine they ease in to the skin. The SC Bobber and the Micro Bobber have both been successful at engineering around this phenomenon but the Steeldriver goes a few steps further and eliminates that last quarter of the stroke altogether, the needles come to a complete stop at terminal velocity. What that gives you is an incredibly balanced and controlled stroke that is more capable of lining off the tips of the needles with both large and small groupings. As a shader the Steeldriver punches ink in to the skin with great efficiency. Black and gray as well as other softer techniques can be achieved with the Steeldriver through practice as well.

Ultimately I engineered the Steeldriver to incorporate the best aspects of well tuned coil machines and rotaries together. It is more coil like than any of the other Bowers machines besides my Steeldriver coils, which is why it shares their name. The Steeldriver is plug and play, it’s designed for anyone coming from either coils or rotaries to be able to hook it up and be comfortable with the machine with very little adaptation time.

Introducing the Steeldriver. After over a year of design and testing the Steeldriver is ready. It has proven to be an incredibly capable liner and shader with cartridges and needle tube setup. The stroke characteristics of the Steeldriver are different than the other Bowers models in that it takes the stroke philosophy and mechanical give to the next level. The Steeldriver is more snappy off the tip than any other Bowers machine, it still has that mechanical give that keeps you from feeling like you’re skating on thin ice when lining but it’s ability to drop in lines and color equally well off the tip, middle and back of the stroke are second to none.

The Steeldriver is a powerhouse of a machine. It has the most coil like hit of any other model. With it’s adjustable yoke you can have a slow super punchy stroke or a tighter snappy stroke. Great for cartridges and needle tube, designed for both lining and shading, and makes a great stipple shader as well. This machine will pack color and run a large grouping lines effortlessly.

The Steeldriver design builds off the phenomenon of the cam quarters as mentioned in my book “The Right Tool For The Job”. This is where I explain that rotary machines have a tendency to want to push skin away from the needles as they are coming down because the needles are slowing down on that last quarter of the cams rotation. Rather than punching the needles in like a coil machine they ease in to the skin. The SC Bobber and the Micro Bobber have both been successful at engineering around this phenomenon but the Steeldriver goes a few steps further and eliminates that last quarter of the stroke altogether, the needles come to a complete stop at terminal velocity. What that gives you is an incredibly balanced and controlled stroke that is more capable of lining off the tips of the needles with both large and small groupings. As a shader the Steeldriver punches ink in to the skin with great efficiency. Black and gray as well as other softer techniques can be achieved with the Steeldriver through practice as well.

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Chalk Pink Powder Coated Brass Frames
  
• 24k Gold Plated Parts
• 24k Gold Plated Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Limited Mike Pike x Destroy Troy Teacup Liner - Black & Gold

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar
  
• Custom 8 Wrap Glitter Gold Fish Scale Coils
  
• Black Anodized Aluminum Frame
• 24k Gold Plated Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• 24k Gold Plated Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of Palleon Panther White with Blackened Motor Cap, Swing Gate Vise, and Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

Special Limited Edition Biomech Dan Kubin V3R Sidewinder carved by Aaron Cain!!!

Machine Specs:

• Raw Brass Frame (for earned natural patina it will gain over time and use) plus Blackened Hardware
  
• Carved and Finished by Aaron Cain!!
• DK Thumbscrew, Batch 4 weighted Armature Bar, and Stroke Wheel
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin. Also good for shading and color blends if you adjust your stroke and voltage.
  
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Special Limited Edition Biomech Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid carved by Aaron Cain!!!

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Biomech Carved and Finished by Aaron Cain!
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner or a quick shader. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom HD Seafoam Powder Coat Finish
• Deluxe DK Blackened Hardware and Stainless Spring
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.