• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD Black Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared, these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and Desktop Stand
• Weighing in at 1 Pound
• Various Powder-coat finishes
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

Joshua Bowers High-Jack

The High-Jack attaches to your workstation magnetically and plugs in to the "machine" port on your power supply effectively moving your clipcord jack 5 feet into the air. This is the ideal position for your clipcord to hang from to keep it off the floor and free from rubbing, tugging, and snagging as you work.

• No more rolling over your cord with your chair
• Keep your cord off the floor
• Reduces the weight hanging off the back of the machine
• Reduces tugs and snags as you tattoo
• Extends the life of your clipcord

A few words from Joshua about The High-Jack:

"The High-Jack is a product I developed to make my clipcord drape and move more easily. The High-Jack magnetically attaches to your work station and plugs in to the Machine port on your power supply. Your clip cord then plugs in to the High-Jack, effectively lifting the clipcord jack 5 feet in to the air. This allows the cord to drape naturally from above you, doesn’t rub on the floor, doesn’t snag across your lap and it takes weight off of the back of the machine easing hand fatigue greatly.

The High-Jack Switch has all the great features of the basic High-Jack with the great new feature of having a switch box at the end to be able to toggle back and forth between two cords. This is a great feature for people using multiple cord types or just want two cords connected so they don’t have to switch cords back and forth. The toggle move from side to side selecting which cord is powered with off in the middle, so you can run on constant and turn your machine off at the High-Jack.

I have been using this product for over a year now, along with the rest of my shop. We were originally just testing them out but I speak for me and the rest of the shop when I say that we can’t imagine tattooing without them now."