Limited Workhorse Hammers

This is a special edition run of custom mini sledge hammers we ran as year end gifts for our team of Workhorse builders. We ran a handful of extra hammers in case any issues arose with the builder gifts, but they all came out great and we decided to offer them to anyone interested. Only difference between these and the builder hammers is the exclusion of the builder names/logos on the handle.

We have lots of work into these and they are quite limited so we had to price them high. From milling custom heads, sanding, torching, and lasering handles, to antiquing, buffing, and clear coating....this project was fun but also very time consuming and involved.

These are heavy duty, fully functional, and will get the job done. They also look great on display hanging in your work station just in case the need for it's use arises.

Specs:

• Solid Brass Head with WHI Milled on both sides
  
• Antiqued, Sanded, Buffed, and Clear Coated to Maintain Head Finish
• Hand Sanded, Lasered, Torched, and Lightly Clear Coated Hickory Hard Wood Handle
  
• Overall Length is about 12 Inches
  
• Head is about 1.5" x 1.5" x 3.5"
• 2 Pound Mini Sledge Head, 2.5 Pound Overall Weight
  
• Made in the USA

 

*Workhorse disclaims and excludes all liability for any use or misuse resulting in consequential, incidental, direct, indirect, or any other damage or injury to self or to others.

Workhorse Irons x Sidnaw Company Tattoo Machine Tool Roll!

After many years of discussion, some back and forth, and a few prototypes, our Tattoo Machine Tool Roll is here and we couldn't be happier with the way they turned out!

Made locally by our friends at Sidnaw Company (formerly Mercy Supply), these Tool Rolls are made for use with the tools most artists use to maintain their tattoo machines. Designed for organization, versatility, and built for durability. Inside there are multiple slots and a large gusseted pocket with an internal zippered front, plus two smaller button pockets for small parts and hardware. The body is made with 20oz waxed canvas.

Specs:

• Dimensions when closed: 11 x 6.5 x 2in
• 20oz USA 100% Cotton Waxed Canvas
• USA Harness Leather
• Steel Buckles
• Hand Hammered Copper Rivets
• USA YKK Zipper

 

Available With or Without Tools - if ordered with Tools the roll includes the following:

• Armature Bar Fixture
• Alignment Tool
• Wiss Spring Snips
• Wurth Premium Spring Punch
• Spring Stock ( 6 feet of 3/4" and 6 feet of 1/2")
• Hex and Torx Key Set (9/64 Allen Key, 5/64 Allen Key, T25 Torx Key, T20 Torx Key, T15 Torx Key)

Care:

 

Our waxed canvas is simply a duck canvas with wax-impregnated cotton yarns. This results in a fabric that’s as strong as duck canvas with an added layer of protection against water, wind and agitation.

Waxed canvas bags and garments can be used for months (even years) without requiring care. When caring for waxed canvas, avoid machine washing and submerging in water. Spot cleaning or hosing off the product is recommended. Hang dry only. Re-wax after prolonged use with an all-natural fabric wax to maintain weather resistance.

 

Handmade in Michigan.

Deluxe Workhorse Tool Set

These are all very simple, yet effective tools used by our builders and many others. Deluxe tool set includes a Wurth Spring Punch, Wiss Snips, Deluxe Armature Bar Fixture, Alignment Tool, Hex and Torx Key Set,  as well as 6 feet of 1/2" and 3/4" spring stock. All at a discounted price.

Armature Bar Fixture Specs:

• Hardened Steel Base and Top Brackets to Ensure Years of Use 
• Standard 1/2" Wide Slot for Rear Springs
• Standard 3/8" Wide Slot For Armature Bars
• 1" x 3" Overall Part Dimensions
• Insert Alignment Tool in hole to use as a stand to help hold your machine while working on it

Alignment Tool Specs:

• 5/16" x 3.5" Stainless Bar
• Knurled Grip
• Armature Bar Nipple Slot on the top for alignment use
• Armature Bar Groove in side for tweaking / turning your abar if necessary....we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.

Wurth Premium Spring Punch:

• Punches holes for #8 screw size
• A must have for machine building and machine repair
• Made in Germany

Wiss Snips:

• 9-3/4" Metalmaster® Compound Action Snips
• Cuts straight, left, and right
• Non-slip serrated jaws cut spring stock with ease

Spring Stock:

• 6 Feet of Blue Tempered Spring Steel
• 1/2" and 3/4" wide by .018 thick

Hex and Torx Key Set includes 1 of each of the following:

• 9/64 Allen Key
• 5/64 Allen Key
• T25 Torx Key
• T20 Torx Key
• T15 Torx Key

Deluxe Workhorse Armature Bar Fixture Set!

This is a very simple, yet effective tool used by our builders and many others. The perfect tool to easily attach springs to your a-bar while ensuring all parts are kept parallel and straight.

Deluxe Fixture works for 1/2" rear springs. It comes with or without our high quality alignment tool and comes standard with a hole in the base to hold the tool and use the fixture as a machine stand, freeing up both hands for repairs.

Armature Bar Fixture Specs:

• Hardened Steel Base and Top Brackets to Ensure Years of Use 
• Standard 1/2" Wide Slot for Rear Springs
• Standard 3/8" Wide Slot For Armature Bars
• 1" x 3" Overall Part Dimensions
• Insert Alignment Tool in hole to use as a stand to help hold your machine while working on it

Alignment Tool Specs:

• 5/16" x 3.5" Stainless Bar
• Knurled Grip
• Armature Bar Nipple Slot on the top for alignment use
• Armature Bar Groove in side for tweaking / turning your abar if necessary....we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.

Also:

• These are must haves for machine building and machine repair
• As always all parts made in the USA
• Skills not included, sorry
  
  *machine obviously not included

Workhorse Alignment Tool!

Designed by SOBA, this is the best tool possible to perfectly align your abar with your tube vise and coils, plus turn it sideways and it features a slot you can slide your abar into to tweak it if your frame is a little out of whack.

- 5/16" x 3.5" Stainless Bar
- Knurled Grip
- Armature Bar Nipple Slot on the top for alignment use
- Armature Bar Groove in side for tweaking / turning your abar if necessary....we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.
- A must have for machine building and machine repair
- Skills not included, sorry

*machine obviously not included