Dan Kubin Sidewinder 46er - FEATHERWEIGHT Black Aluminum RCA

Workhorse Irons

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Black Aluminum RCA

$1,010.00 USD

Dan Kubin's Newest Sidewinder, the V46er!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. It's number one purpose is as a strong, precise, off the tip liner; though It has proven to be much more capable.

Features include:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Weight:

Standard (brass frame construction): 6oz
Featherweight (7075 aluminum frame): 4.4 oz

Durable anodized finish that helps prevent corrosion.

This Featherweight model has about the perfect amount of mass, where it is light and agile, but not so light that it wants to jump out of your hand or feel shakey. (4.4 oz -about 1 oz heavier than other Featherweights, and 1.5 oz lighter than the normal brass machines.)

Recommended voltage range: 4 - 6.5 volts

Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
RCA only version, no clip cord & RCA combo like the V3/24 Sidewinder
The position of the battery makes the machine’s balance point much more forward, like a pen.

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - Black x Gold RCA

Workhorse Irons

Dan Kubin Sidewinder 46er - Black x Gold RCA

$1,050.00 USD

Dan Kubin's Newest Sidewinder, the V46er!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. It's number one purpose is as a strong, precise, off the tip liner; though It has proven to be much more capable.

Features include:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

HD Powder Coated Black Brass Frame with 24k Gold Plated Hardware

Weight:

Standard (brass frame construction): 6oz
Featherweight (7075 aluminum frame): 4.4 oz

Recommended voltage range: 4 - 6.5 volts

Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners

Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine line

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - Bronze x Gold RCA

Workhorse Irons

Dan Kubin Sidewinder 46er - Bronze x Gold RCA

$1,050.00 USD

Dan Kubin's Newest Sidewinder, the V46er!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. It's number one purpose is as a strong, precise, off the tip liner; though It has proven to be much more capable.

Rustic beauty at its finest! Verde patina copper with a durable baked-on lacquer protective coating.

Features include:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Weight:

Standard (brass frame construction): 6oz
Featherweight (7075 aluminum frame): 4.4 oz

Rubbed Bronze Plated Brass Frame for balance and less vibration.

Recommended voltage range: 4 - 6.5 volts

Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
RCA only version, no clip cord & RCA combo like the V3/24 Sidewinder
The position of the battery makes the machine’s balance point much more forward, like a pen.

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Black x Gold w/ RCA

Workhorse Irons

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Black x Gold w/ RCA

$1,050.00 USD

Dan Kubin's Newest Sidewinder, the V46er!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. It's number one purpose is as a strong, precise, off the tip liner; though It has proven to be much more capable.

Features include:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Black Aluminum Frame with 24k Gold Plated Hardware.

Weight:

Standard (brass frame construction): 6oz
Featherweight (7075 aluminum frame): 4.4 oz

Durable anodized finish that helps prevent corrosion.

This Featherweight model has about the perfect amount of mass, where it is light and agile, but not so light that it wants to jump out of your hand or feel shakey. (4.4 oz -about 1 oz heavier than other Featherweights, and 1.5 oz lighter than the normal brass machines.)

Recommended voltage range: 4 - 6.5 volts

Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

RCA Specifications:

RCA version is wired for the harder hit mode only using RCA connection
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
RCA only version, no clip cord & RCA combo like the V3/24 Sidewinder
The position of the battery makes the machine’s balance point much more forward, like a pen.

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - White x Gold

Workhorse Irons

Dan Kubin Sidewinder 46er - White x Gold

$1,015.00 USD

Dan Kubin's Newest Sidewinder, the V46er!

The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.

This machine is very strong off the tip with a great follow-through. It's number one purpose is as a strong, precise, off the tip liner; though It has proven to be much more capable.

HD White Powder Coat Finish

24k Gold Plated Gold Parts and Hardware

Features include:

Wider springs for more durability.
Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
Smooth, easy clamping tube vice.
Forward weight distribution for better ergonomics.
24k Gold Plated Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.
O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
Reliable Mabuchi motor. -because they run forever without losing consistency.

Weight:

Standard (brass frame construction): 6oz
Featherweight (7075 aluminum frame): 4.4 oz

Recommended voltage range: 4 - 6.5 volts

Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs. The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners

Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine line

Customer Reviews

Based on 2 reviews Write a review

Dan Kubin Sidewinder 46er - Featherweight Mint

Customer Reviews

You may also like

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Black Aluminum RCA

Customer Reviews

Dan Kubin Sidewinder 46er - Black x Gold RCA

Customer Reviews

Dan Kubin Sidewinder 46er - Bronze x Gold RCA

Customer Reviews

Dan Kubin Sidewinder 46er - FEATHERWEIGHT Black x Gold w/ RCA

Customer Reviews

Dan Kubin Sidewinder 46er - White x Gold

Customer Reviews