Dan Kubin's Newest Sidewinder, the V46er! 

• Beautiful 24k Gold plated frame and parts!
• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics.
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan.  All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Dan Kubin's Newest Sidewinder, the V46er! 

• BLACK HD POWDER COATED FINISH 🖤
• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics.
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

• Recommended voltage range: 4 - 6.5 volts
• Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)
• Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners. Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine line
• Weighs 6 oz

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord!

• Durable anodized finish that helps prevent corrosion.
• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics.
• Beautiful brass armature bar, perfectly balanced for a strong, confident, and  consistent hit.  
• O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

Dan Kubin's Newest Sidewinder, the V46er! 

• New Limited Run of Light Green Verdigris! Much more green than the standard Verdigris. Rustic beauty at its finest!  Verde patina copper with a durable baked-on lacquer protective coating. Finish may vary.
• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics.
• Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
• O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

Dan Kubin's Newest Sidewinder, the V46er with RCA + Clip Cord!

• Wider springs for more durability.
• Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
• Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
• Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
• Smooth, easy clamping tube vice.
• Forward weight distribution for better ergonomics.
• Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
• O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
• Reliable Mabuchi motor. -because they run forever without losing consistency. 

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.