New Mike Pike Smith & Howard Liner!

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a Blackie frame for it's association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

• Mini Pike S&H Frame CNC Cut from Iron Bars
• Black Zinc Finish
• Deluxe Workhorse Blackened Hardware
• Long Fluted Armature Speed Bar
• Blackened Steel binding posts
• 1" 8 Wrap Workhorse Coils
• Medium Speed with a Long Stroke and Hard Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 14s
• Made in the USA by Mike Pike
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
• 6.4 ounce weight

New DK Swift Tip System!  

This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your work station. 

Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health. 

Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips! 

DK Swift Tips - 11 Mag - Box of 24 Tips (Grip Not Included)

*Must be used with DK Swift Tip Grip

These tips have great visibility and come to a nice point.  The biggest benefit is being able to see more needle even when you don't have a lot of needle hanging out.

The shape of the mag tip allows for mor visibility at the end of the tip.  The side wall is beveled back so there is no excess material on the edges. This allows for getting a more precise "cut in" near lines and tight spaces.

Fits 9 mags.

These tips are hydrophobic and have an antimicrobial additive in them. That said, you may need to check with your local health dept for protocol on single use plastic products used in the tattooing process. (such as ink caps)

*Blister packaged tips coming soon

Made in house at DK Rotary in Kansas City MO, USA

Better tools to make better tattoos.

Deluxe Brass Binding Post Set

Antiqued high quality brass, precision milled to trade standard measurements of 0.625" length and 0.312" diameter. Rear Binder is designed for Horizontal use.

Each set includes the front and rear binder, brass washers, fiber washers, screws, nylon bead, and knurled Copper Contact Screw.

9-3/4" Metalmaster® Compound Action Snips. Cuts straight, left, and right. Non-slip serrated jaws cut spring stock with ease.

Official DK Thumbscrew - 8-32 Thread, Full 5/8" Length, compatible with most Kubin Vise Styles.

DK Offset Cartridge Grip! 

The offset helps put the machine over the top of the user’s hand, making it more ergonomic and easier to keep the machine upright when pulling those large square looking lines.

• TWO Versions Available: 
  
  • Heavy Weight 1.25" BRASS Grip and Stainless Steel backstem (8oz)
  • Feather Weight 1.25" ALUMINUM Grip and Stainless Steel backstem (2.75oz)
• Brass is heavier but absorbs vibration more and offsets the pull of a clip cord and or any ass end tattoo machine weight, balancing more over the hand
• Aluminum is much lighter and pairs well with use of a battery to reduce overall weight. Balance is a bit better with the Brass version, but it is a trade off for weight. 
• Offset for better balance and visibility 
• Made of naturally anti-microbial Brass
• Each Grip Comes with 5 Cartridge Drive Bars
• Please cover with barrier film for extra protection!
• Made in the USA by Dan Kubin 

Better tools to make better tattoos.

NEW Dan Kubin V3/23 Sidewinder!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

Machine Specs:

• Black Brass Frame with Black Hardware(*Finish may vary)
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

New DK Swift Tip System!  

This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your workstation. 

Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health. 

Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips! 

DK Swift Tips - 13 Mag - Box of 24 Tips (Grip Not Included)

*Must be used with DK Swift Tip Grip

These tips have great visibility and come to a nice point.  The biggest benefit is being able to see more needle even when you don't have a lot of needle hanging out.

The shape of the mag tip allows for mor visibility at the end of the tip.  The side wall is beveled back so there is no excess material on the edges. This allows for getting a more precise "cut in" near lines and tight spaces.

Fits 9 mags.

These tips are hydrophobic and have an antimicrobial additive in them. That said, you may need to check with your local health dept for protocol on single use plastic products used in the tattooing process. (such as ink caps)

*Blister packaged tips coming soon

Made in house at DK Rotary in Kansas City MO, USA

Better tools to make better tattoos.

Bowers Clipcord Repair Kit

Every Bowers Repairable Clipcord comes with a repair kit, if you’ve lost yours or need more parts this is for you.

REPAIR KIT COMES WITH ALL THE TOOLS YOU NEED TO REPAIR YOUR BOWERS CORD....including instructions and extra parts.

Some words from Bowers on why he made these clip cords:

"A couple years ago I designed this clip cord and built one for myself. The design came from being frustrated with the options that were on the market. When I designed these clip cords I had a list of demands.
-This cord HAD to be repairable, quickly and easily.
-lightweight
-no-stick, flexible cord
-brass or copper leads
Every part of the the clip cord end can be replaced or repaired quickly and easily. Even comes with the parts and tools to do it! You will not be left struggling with a short in your cord, no backup and rummaging around looking for your best broken cord to finish or do the tattoo.The cord is a matte non stick material that glides smoothly along surfaces, it is NOT a 5 lb clip cord you’re hooking up to 3 oz. machine, the brass leads will not groove your binding posts nearly as fast as the standard steel leads found on most clip cords. I’m excited about this new product and to able to finally share it with all of you."

Eco-responsible clip cord sleeves (100) and machine bags (100) sample pack that are biodegradable / compostable on land AND sea (...or any body of water).

This is a test product we're looking to bring to the tattoo market pending your feedback. PVA was invented in the 1920s by German Scientists, and has mostly been used in medical, embroidery, garment and personal applications since the 1960s, for products such as medicine capsules and laundry detergent pods. PVA bags are widely used in hospitals for laundry bags - the soluble bags help prevent cross contamination from soiled laundry. The PVA bag traps the microorganisms inside and since the medical worker doesn't have to open the bag it reduces the risk of transmission because it can be placed directly into a hospital washing machine. The tensile strength of the bag will only begin to be compromised if it is drenched or submerged in water.

Features:

• Raw Materials: PVA, Starch, Glycerin and Water
• Clip Cord Sleeve: 5.1cm (2 inches) wide x 61cm (24 inches) long
• Machine Bag: 10.5cm (4 inches) wide x 13cm (5 inches) long
• 25 microns thick 
• Eco responsible printing (EEQ tested)

Benefits: