White - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years. If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Matte Olive Powder Coated Brass Frame
• 24k Gold Plated / Black Parts
• 24k Gold Plated Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Juan Puente Springs

Each Spring Set Includes: Fully punched front and rear springs.

Liner Spring Set- Juan Puente Liner (Medium Front, Short Rear)
Shader Spring Set- Juan Puente Shader (Long Front, Short Rear)

Seth Ciferri Mini Fastback Liner

Highlights:

• CNC Cut Iron Mini Fastback Liner Frame
  
• Black Zinc Finish
  
• Black Workhorse Hardware and Coin Thumbscrew
  
• Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
  
• 1" 8 Wrap Workhorse Coils

Specifications:

• Medium Slow Speed with a Medium Hard Hit
  
• Running 125-130 Hz @ 6 V Unloaded
  
• Pushing 5's to 11's No Problem
  
• Weighs 7.2 oz
  

Made in the USA

New Workhorse Irons Long Sleeve T-Shirts designed by Guy Le! 

Quality NAFTA approved Black t-shirt with Guy Le original imagery. Large front chest, plus sleeve prints.

Comfortable fit, not too tight, not too loose. Enjoy.

Seth Ciferri's Middleweight LEFTY Weiner Dog Shader 2.2!

Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power while still keeping the weight under 6 ounces!

Highlights:

• Completely Backwards Iron Frame for Left Handed Use
  
• Workhorse Red Oxide Finish
• Standard Pinch Vise
  
• Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
  
• 1" 8 Wrap Heat Shrink Coils Plus Capacitor Strap

Specifications:

• Medium Speed with a Hard Hit 
  
• Great For Color Packing and Whip Shading
  
• Running 100-105 Hz @ 6 V Unloaded
  
• Pushing 5's-15's All Day
  
• Weighs 5.95 oz
  

Made in the USA

Seth Ciferri Cholomatic™ Liner V2

Updated version of Seth's only machine built and designed as a dedicated single needle liner for fine line work. New updated version includes shorter geometry utilizing his steel slide vise from his Doorbell machines on a very lightweight Aluminum frame. These are by far the best version yet, they are more compact with less weight, plus a chunky steel vise to reduce noise and vibration.

Highlights:

• Black Anodized Aerospace Aluminum Chopped Cholomatic™ Liner Frame
  
• Blackened Steel Slide Vise 
  
• Black Deluxe Hardware
  
• 1.125" 8 Wrap Workhorse Coils

Specifications:

• Quick with a Soft Hit
  
• Perfect for Stippling and Extra Fine Lines
  
• Running 150- 155 Hz @ 6 V Unloaded
  
• Best Pushing 1's to 3's 
  
• Well Balanced 6.4 oz
  

Made in the USA

SOBA V2 Mini Clipper Liner

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

Highlights:

• CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
  
• Raw Brass Vise and Thumbscrew
  
• Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder 
  
• 1" 8 Wrap Custom SOBA Coils

Specifications:

• Great for Medium to Large Groupings
  
• Medium Speed with a Hard Hit 
  
• Pushing 5's to 14's All Day
  
• Running 125-130 Hz @ 6.5 V Unloaded
  
• Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
  

Made in the USA

Poly Sleeves (Bag of 100)

These disposable sleeves are constructed of strong, lightweight polyethylene. Each disposable sleeve offers full arm coverage