SOBA Lovebird Cartridge Liner - Nickel Plated

SOBA IS BACK! After his one year 2020 Sobbatical, BJ is back building a limited amount of custom coil machines, working on new production, and now making rotary machines!

New Lovebird Cartridge Rotary! Built with a minimalist design approach, coupled with functionality and dependability, these rotary machines are plug and play ready to tattoo all day every day right out of the box. Lightweight Aluminum frame, built-in drive bar, clip cord set up, high end motor, 4mm stroke, highly functional pinch vise, and well balanced.

Some words from SOBA himself on this machine:

"The #LoveBirdLiner is my first rotary machine! It was designed to be a good outlining machine for cartridge needles. Aluminum body- only 3.3 ounces! Fixed drive bar with 4mm fixed stroke.

I have noticed that most rotaries for cartridge needles are trying to be a “one machine that does it all” and I understand why that is desirable. However- one machine really can’t do it all, if you want to do it right. Different needle configurations perform differently and we get better results using machines BUILT ON PURPOSE. We get better results when we use the proper tools for the job.

I was not happy with all the machines I own as far as their performance with cartridge liners, so I decided to make one. This is a direct drive rotary machine with all the pieces in places for the purpose of making quality outlines. It was really fun to design and the body shape allows for some really fun laser engraving opportunities. I hope you all think it’s neat. Cheers to another 20 years of making devices for the purpose making tattoos. Thank you all for your support and encouragement!!! 💚🙏🏼💚"

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Seafoam Powder Coated Brass Frames
  
• Black Oxided Hardware
  
• Black Anodized Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

NEW Dan Kubin V3/24 Sidewinder!

The most significant update to the V3/24 Sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

Aside from the added Needle Bar Tensioner, this new version of remastered V3 Sidewinder is dialed in and updated with various improvements to increase machine longevity and consistency. 

The V3/24 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

Machine Specs:

• Black Polished Aluminum Frame with Blackened Hardware
  
• Featherweight Aluminum version provides the same performance weighing in a couple ounces less than the Brass version at about 3.5 ounces
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar:
  • Needle Bar Tensioner - when setting up your needle and tube, position needle tensioner in desired position depending on the amount of tension you want to add to the needle bar. Adjust position by loosening the thumbscrew and then tightening when you reach desired tension. 
  • Rubber Band alternative setup - Loosen / remove thumbscrew to take the needle tensioner off. Then when setting up the machine, wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples. 
    
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

 Limited Edition Black on Black V4 Ghost Dog Liners!

New V4 Adam Ciferri Ghost Dog Liner!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Custom Gloss Black Powder Coat Finish
• Deluxe Workhorse Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

NEW Dan Kubin V3/23 Sidewinder!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

Machine Specs:

• Verdigris Patina Plated Brass Frame with 24k Gold Plated Hardware and Motor Cover (*Finish may vary)
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

NEW Dan Kubin V3/23 Sidewinder!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Machine Specs:

• 24k Gold Plated Brass Frame and Motor Cover with Black Hardware (*Finish may vary)
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

**Do not connect power to the RCA plug and Clip Cord connection at the same time, it may cause damage to your power supply, battery, and or machine. 

Special Edition Birthday Machines for 2-22-22 - Seth Ciferri Supreme Style OG Flastside Walker

In celebration of Seth's Birthday and the once in a lifetime 2/22/22 Twosday, we are releasing these special edition machines at some special pricing! These have been in the works for a while now, from digging up the old pattern, casting frames, various machining tweaks, hand grinding, stamping, polishing, plating, custom coils, silver contacts, assembly and fine tuning....these machines are top notch with no expense spared in their creation.

Technical Specs:

• Cast Iron OG Walker Frame
• Hand Ground, Prepped and Lightly Polished Brushed Nickel Plated Finish
• Deluxe 24k Gold Plated Hardware, Plus Silver Contact
• Hand Brazed Collet Vise, great for use with Disposable and Steel Tubes
• 22 Cent Dime and Penny Washers
  
• 1" 8 Wrap Custom $22 Coils with Specialty Cores
• Medium Quick Speed with a Solid Hit
• Running 135-140 Hz at 6V Unloaded
• Pushing 3's to 9's No Problem, turn up for 11s
  
• Weighing in at ounces about 7 ounces
• Limited Edition Run of 22
• As always, MADE IN THE USA

Sea Foam - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years. If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

Dark Brown - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years.  If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

*Special Edition Black Friday Machine Kit at special pricing! Never before offered Juan Puente Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

Juan Puente OG Shader Machine Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Juan Puente Frame
• Blackened Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 8 Wrap Custom Soldered Coils
• Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screw driver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Liner typical specs:

• Slow Speed with a Solid Hit
• 110-115 Hz at 6 V Unloaded
• Weighs 7.2 Ounces
  
• Pushing up to 13's All Day

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

*NEW Product Alert🚨Something new and a bit different from @sobaone! After years of brainstorming, engineering, and testing, SOBA has created and dialed in a rear spring alternative for coil machines! Consistent and strong, these machines are very versatile with a large range and require little to no maintenance or repair. 💥

New SOBA Whipper Snapper Liner!!

• CNC Precision Cut Ductile Iron Frame
• New Wire Rear Spring with no Spring Shelf eliminating rear spring breaks and reducing machine maintenance
  
• Swing Gate Vise with and Internal Spring for ease of use
• Custom Satin Black Powder Coat Finish
• Custom Deluxe Blackened Hardware
• Custom SOBA Skull Contact
• Deluxe 1" 8 Wrap Electrical Tape coils
  
• Medium Spreed with a Heavy Hit
• Great for Medium to Large Sized Groupings
• Pushing 5's to 11's easy, turn up a little for 14-18's
• Spring Clamp setup makes these machines very versatile, this batch is setup for bigger stuff, but they can be adjusted for smaller quicker work or even color packing as well
• Running 115-125 Hz @ 6.5 V Unloaded
• Weighs 6.8 oz
• MADE IN THE USA

* Limited Release, more available soon, plus Shaders soon as well!

New Eddy Deutsche Liner!

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Black Long Nipple A Bar
  
• Custom Hand Wound 8 Wrap Coils
  
• Custom HD Black Powder Coat
  
• Deluxe Blackened Hardware plus pure Copper Contact
  

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 130-135 Hz Unloaded at 6.5V
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
• Made in the USA