• Precision milled high-grade Aerospace Aluminum body
  
• Custom Lime Anodized Parts and Illusion Green Powder Coated Frame, plus Blackened Deluxe Binders and Cast Iron Wingnut
• Custom Cory Rogers Laser Etched Artwork
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Mike Pike x Destroy Troy Jonesy Liner

These are the second special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, originally the Jonesy was going to be their first collaborative machines, but the Teacups jumped in first while we dialed in these Jonesy machines. Now after many frame adjustments, tweaks and updates, they have evolved and improved, and we couldn't be happier with the result. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Lightweight Ice Blue Anodized Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• Black Oxided Extra Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Black Deluxe Hardware
  
• Blackened Destroy Troy Cray Bar
  
• Custom 9 Wrap Purple Coils with Pike x Destroy Troy Washers
  
• Disco Blue x Clear HD Powder Coat Brass Jonesy Upright and Wingnut
  

Specifications:

• Medium Speed with a Solid Hit
• Running 140 Hz Unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Mike Pike Limited Brass Jonesy Liner - Illusion Ice Blue

- HD Illusion Ice Blue Powder Coated CNC Cut Billet Brass Frame with PIKE Stamp
- Deluxe Nickel Plated Hardware plus Solid Silver Contact
- Over Under Rear Binder Setup
- Custom Designed Pike Vise
- Custom 1" 8 Custom Coils
- Quick with a Solid Medium Hit
- Running 145 Hz @ 6.5V Unloaded
- Pushing 3's-9's All Day
- Weighs 8 Ounces
- MADE IN THE USA

New SOBA V2 Mini Clipper Liner! Limited Edition Blue!

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

- CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
- Anodized Satin Galactic Blue Finish
- Heavy Weight Brass Vise and Thumbscrew with a Cosmic Universe Black Powder Coated Finish
- Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder
- 1" 8 Wrap Custom Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 5's to 14's All Day
- Running 130-135 Hz @ 6.5 V Unloaded
- Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
- MADE IN THE USA

Joshua Bowers SC Bobber

Now with a Swing Gate Vise that works great with all tubes!

A Few Words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Specs:

• Precision Machined Aluminum Body with Custom Powder Coat Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord
  
• Weighing in at a mere 4 oz!
• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use

Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram

*NOW WITH SWING GATE VISE! Guaranteed to lock tight on any tube.

SOBA Cast Iron Pilot Liners and Shaders:

After 20+ years of production, numerous machining updates and tuning tweaks, these are the longest running models we sell. With long forgiving geometry, these machines are the tried, true, and consistent Workhorses of tattooing. Built to last a lifetime with little muss or fuss. Great for apprentices figuring out the basics, as well as veterans looking for the feel and performance of an all around solid coil machine.

Liner Specs:
- Sand Cast Ductile Iron Frame
- Custom Textured Purple Finish
- Deluxe Blackened Workhorse Hardware
- Custom 6 Wrap 1.125" Matching Coils
- Long Frame Machine Allowing a Liners Point Gap, with a Long Stroke
- An All Around Outlining Tool....perfect for those long days of knocking out flash tattoos with speed and precision.
- Running 130-135 Hz @ 6.5 Volts Unloaded
- Pushes 3s to 11s Easy
- Weighing in at 7.5 oz
- MADE IN THE USA

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard CAin geometry set up to wrong quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Milled Carved Iron Frames
• Limited HD Matte Olive Green Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

*Spring Sale $75 off Limited Time Only*

Legacy Edition Dan Kubin V3R Sidewinder

*This is a special run of Sidewinders built with the original V3R Armature Bar for an even heavier hit and slightly different feel from the current version V3R.

"Special Legacy Edition Sidewinder with OG V3R Armature Bar and Springs on the newer updated frame with DK Thumbscrew included! These Legacy machines are a little quieter and geared more towards being effortless with a stronger hit off the tip. These Legacy machines are intended for experienced tattooers, their happy place is for 7-14 Liners.

Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• 24k Gold Plated Brass Frame (*Finish may vary)
  
• Black DK Thumbscrew and Blackened Brass OG Armature Bar
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6) **Special note, Legacy Edition machine timing marks are slightly off due to using the OG armature on the newer frames. Down stroke timing mark should sit just outside the timing mark on the high side. If you go much lower you will know as you will make contact with the top of the frame with the armature.
  

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short. Smaller number setting great for small groupings, large numbers large groupings. Machines are tuned and shipped on the 5 setting, some don't ever adjust this, some do, user preference.
  

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

*Completely black oxided.  *please note that the brass will peak though over time where it sees heavy wear, adding to its character.

For more info please watch the V3R Setup and Tuning Video:

Limited Edition Adam Ciferri Pitbull Liner - Sparkle Lilac x Gold

Specifications:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Heavy hit that easily pushes 5's to 11's
- Runs 125-130z @ 6.5 Volts Unloaded
- CNC Cut Iron with the highest precision and care
- HD Lilac Powder Coat with Dark Purple Sparkle Finish
- 24k Gold Plated Hardware and Silver Contact
- 1.125" 8 Wrap Custom matching Coils
- Weighing in at 6.4 ounces
- MADE IN THE USA

A few words from Adam on his history with this machine:
"I think most of you know that I've been making a version of this machine since about 1999, but, I don't know how many of you really know the story of how this machine came to be…

In mid 1999, the first Pitbull outliners were made by chopping down some bulldog shaders. They ran a bit slow and punchy for what I'd call an outliner, but, they definitely did the job. Over the years, there have been a few iterations of this machine, and almost all of them were based on, basically, cutting up a shader and, either making due with the geometry, or adjusting the geometry.

What we have here is the new version I designed for Workhorse Irons. This machine is based on the dedicated geometry that I've wanted for this machine since, just about, day one. It lends itself to a few different liner configurations without needing to apply any hocus-pocus. Small groupings? Sure. Medium groupings? Yes. Big, fat, ig'nunt-ass outlines? Fuck yeah-continually, since 1999! This machine has a great range, but is basically set up to make big fucking outlines, quickly."
Respectfully, Adam C

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Good for Quick Color Packing or B&G Work / Color Blends
• CNC Cut Iron with the highest precision and care
• 1" Custom Keg Coil
• HD Black Powder Coat Finish
• Deluxe Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Shader is tuned for all-day, every-day street shop and/or custom tattooing. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Good for Color Packing or Color Blends
• CNC Cut Iron with the highest precision and care
• 1" Custom White Scale Keg Coil
• Gloss White Gold Glitter Powder Coat Finish
• Deluxe 24k Gold Plated Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Shader is tuned for all-day, every-day street shop and/or custom tattooing. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C

Limited Mike Pike x Destroy Troy Teacup Liner - Black & Gold

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar
  
• Custom 8 Wrap Glitter Gold Fish Scale Coils
  
• Black Anodized Aluminum Frame
• 24k Gold Plated Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• 24k Gold Plated Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of Palleon Panther White with Blackened Motor Cap, Swing Gate Vise, and Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

Limited Magic Mushroom Mike Pike x Destroy Troy Rainbow Black Teacup Liner

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom 8 Wrap Magic Mushroom Coils
  
• Custom Cut Destroy Troy x Mike Pike Rainbow Glitter Coil Washers
• Black Aluminum Frame
• Black Steel Destroy Troy Forward-Weighted Vise Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• 24k Gold Plated Contact Screw and Springs
  

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA