Special Limited Edition Biomech Dan Kubin V3R Sidewinder carved by Aaron Cain!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original hit and performance of the V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

Machine Specs:

• Custom Aaron Cain Hand Carved Bio-Mech Brass Frame, Armature, and Motor Cover with custom patina finish (carving varies a little on each machine)
  
• Limited Edition of 10 
• Cain Chopped Coin Thumbscrew, new Brass Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6) (timing marks on these are a little harder to see with the carving)
  

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to run quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Mill Carved Iron Frames
• Limited HD Gloss Plateau Green Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Custom Purple Money Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to run quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Milled Carved Iron Frames
• Limited HD High Gloss Translucent Candy Orange / Brown Finish
• Deluxe Workhorse Polished Brass Hardware
• 1.125" 10 Wrap Custom Etched Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running around 145 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

Forro atornillado de níquel plateado de edición limitada de Aaron Cain

Esta serie especial de máquinas limitadas está construida sobre la base atornillada de Aaron con placas laterales de níquel plateado cortadas con chorro de agua con un acabado de pátina personalizado. Máquinas de alto rendimiento con la estética icónica de Aaron.

- Base de hierro cortada CNC
- Bobinas de billete de dólar personalizadas Deluxe de 1" con 8 envolturas
- Herrajes ennegrecidos de lujo
- Carpeta trasera vertical
- Velocidad media rápida con un golpe sólido
- 140-145 Hz a 6 V sin carga
- Pasar de 3 a 11 no es problema
- Resistente y versátil, un verdadero caballo de batalla
- Pesa 7.3 oz
- FABRICADO EN EE. UU.

*RCA VERSION

Special Limited Edition Biomech Dan Kubin V3R Sidewinder carved by Aaron Cain!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Machine Specs:

• Bio mech hand carved Brass Frame and Armature with custom patina finish (carving varies a little on each machine)
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6) (timing marks on these are a little harder to see with the carving)
  

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

Holiday Discount! 20% off now until the end of the year. Discount will apply in cart.

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard CAin geometry set up to wrong quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Mill Carved Iron Frames
• Limited HD High Gloss Metallic Gray Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Custom Purple Money Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA