Keep your workstation organized while charging all of your Critical Universal Batteries with our Critical Universal Battery Docks. The docks are compatible with all Critical Universal, Critical Connect, and Power Wand batteries.
This dock features a no fuss easy battery swap, so you can swap out batteries quickly with just one hand.
Built-in magnetic bottom allows unlimited mounting capabilities for easy access during your tattooing sessions.
Features:
Compatible for both RCA & 3.5mm Critical Universal Batteries, Critical Connect, Power Wand, and Critical Torque V3 Batteries
2 charging slots
Unlimited magnetic mounting capabilities
Batteries fit easily, precisely and will stay in place at most angles
Quick battery swap
Approximately 2-3 hours charge time from depleted to full
Specifications:
Dual Dock Specs: 4" L x 2" W x 1 1/8" H
USB-C Cable
USB-C Wall Plug
Color: Black
Patents:
US Patent Pending
CA Patent Pending
CN Patent Pending
EU Patent No. 008363311-0002
(DOES NOT INCLUDE THE CRITICAL UNIVERSAL BATTERY PACK)
Workhorse Irons
Fuente de alimentación de tatuaje medida Deluxe Workhorse personalizada V2
Precio habitual$400.00 USD
Grouping
Price
Inventory
Quanity
Espuma de mar
$400.00 USD
Agotado
Purple
$400.00 USD
Agotado
Black
$400.00 USD
Agotado
Rojo
$400.00 USD
Agotado
FUNCIÓN LIMITADA DEPERSONALIZADOFuente de alimentación medida Deluxe Workhorse
¡Después de años de investigación y pruebas, estamos muy emocionados de lanzar nuestra nueva y mejorada, mejor que nunca, fuente de alimentación de tatuaje medida de lujo! Industrial y básico por fuera, moderno y de alta tecnología por dentro con todos los componentes adecuados necesarios para una energía limpia y consistente con lecturas de medición precisas.
Especificaciones:
Energía limpia y consistente
Lecturas de voltios, hercios, trabajo y amperios
Opción de encendido constante (simplemente presione el botón plateado en el logotipo)
Interruptor de encendido/apagado en el lateral.
Enchufes hembra resistentes para sujetar de forma segura los cables CC y de interruptor de pie en su lugar.
Funcionará con todas las máquinas rotativas y de bobina.
Enchufe eléctrico de EE. UU. de 110 V o enchufe eléctrico de 220 V de la UE
Viene con 3 potentes imanes de un cuarto de tamaño, pies y soporte de escritorio.
Con un peso de 1 libra
Varios acabados de pintura en polvo
Cuerpo de aluminio de 4,25" x 3,6" x 1,35"
La garantía de 1 año cubre cualquier defecto de fabricación que provoque fallas en el producto. La garantía no cubre abuso o daños excesivos, pero si decide arrojarlo contra la pared del taller y luego golpearlo con un martillo, intentaremos ayudarlo a reparar el suministro por usted.
Opciones de montaje:
Soporte de escritorio: utilice el adhesivo de 3 m incluido para colocar los imanes incluidos en la parte posterior de la fuente de alimentación y, a continuación, fije el suministro al soporte.
Montaje lateral: use el adhesivo de 3 m incluido para unir los imanes en una fila en el lado derecho de la fuente de alimentación, luego el suministro de imanes al costado, al carro o al baúl de herramientas
Montaje plano: use los pies incluidos y colóquelos en la parte inferior de la fuente de alimentación o el adhesivo de 3 m incluido para colocar los imanes en la parte inferior de la fuente de alimentación
No se cortaron esquinas ni se escatimaron gastos, estas fuentes de alimentación están hechas de piezas y componentes de la más alta calidad. Construido para durar y fabricado en los Estados Unidos.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with durable Antique Nickel Plated Finish
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with durable Antique Nickel Plated Finish
24k Gold Plated Hardware
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with durable Black Oxide Finish
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with 24k Gold Plated Frame and Hardware
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI machines go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCIs are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with HD Light Pink Powder Coat Finish
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with durable Rubbed Bronze Plated Finish
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with durable Rubbed Bronze Plated Finish
24k Gold Plated Hardware
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with HD Seafoam Powder Coat Finish
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Recientemente remasterizado después de 6 años desde su encarnación, esta es la segunda generación de Mojobox. Ahora con más versatilidad y facilidad de ajuste de golpes en todo el tatuaje. Además, es más ergonómico, más fiable y, sobre todo, más rendimiento que su predecesor.
Es una máquina tipo bobina impactante con la confiabilidad y ergonomía de una rotativa.
El enfoque de su diseño es parecerse más a un sombreador/empaquetador que también puede delinear bien, mientras que el Sidewinder es más un delineador que puede sombrear. Si prefiere más golpe a una velocidad más lenta o media, esta es una gran opción. Excelente para línea fina, negro y gris, embalaje de color con cualquier tamaño de mag. Puede impulsar 14 revestimientos, si prefiere "colocar la aguja en la piel", mientras que Sidewinder prefiere que la aguja flote sobre la piel. El Mojobox remasterizado tiene una rueda de carrera ascendente numerada (igual que el V3r) que permite una amplia gama de versatilidad a lo largo del golpe una vez en los rangos de voltaje 5.3 y superiores. Diseñado para agujas estándar. -para cartuchos, puede usar una banda elástica para negar la tensión, aunque no funcionará tan bien como con una aguja estándar. Rango de operación típico: 4 - 6 voltios Peso: 5 onzas
Newly remastered, this is the 2nd variant of the 2nd generation of the Mojobox. New spring setup that enhances performance, punch, adjustability, and makes it more cartridge friendly!
Now with more versatility and ease of hit adjustment throughout the tattoo. It is more ergonomic, more reliable, and most of all, more performance focused than its predecessor. It is a punchy coil like machine with the reliability and ergonomics of a rotary.
Highlights:
Brass Frame with Polished Nickel Finish
Numbered upstroke wheel (same as the V3r). The higher the number, the harder it will hit. *Please use common sense & not run it on high volts with a high setting on the upstroke wheel.
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive which is the nature of a cartridge.
Specifications:
Normal operating range: 5.3 - 6 volts for lining, 4 - 5.5 volts for shading.
Excellent for fine line, black and grey, color packing with any size mag.
Can drive 14 liners, if you prefer to “set the needle into the skin”
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive, which is the nature of a cartridge.
Weight: 5 oz
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Mojobox go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Mojobox are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Newly remastered, this is the 2nd variant of the 2nd generation of the Mojobox. New spring setup that enhances performance, punch, adjustability, and makes it more cartridge friendly!
Now with more versatility and ease of hit adjustment throughout the tattoo. It is more ergonomic, more reliable, and most of all, more performance focused than its predecessor. It is a punchy coil like machine with the reliability and ergonomics of a rotary.
Highlights:
Aluminum Frame with Baby Blue Finish
Numbered upstroke wheel (same as the V3r). The higher the number, the harder it will hit. *Please use common sense & not run it on high volts with a high setting on the upstroke wheel.
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive which is the nature of a cartridge.
Specifications:
Normal operating range: 5.3 - 6 volts for lining, 4 - 5.5 volts for shading.
Excellent for fine line, black and grey, color packing with any size mag.
Can drive 14 liners, if you prefer to “set the needle into the skin”
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive, which is the nature of a cartridge.
Weight: 2.95 oz
Made in the USA!
All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Mojoboxes go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current mojoboxes are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Recientemente remasterizado después de 6 años desde su encarnación, esta es la segunda generación de Mojobox. Ahora con más versatilidad y facilidad de ajuste de golpes en todo el tatuaje. Además, es más ergonómico, más fiable y, sobre todo, más rendimiento que su predecesor.
Es una máquina tipo bobina impactante con la confiabilidad y ergonomía de una rotativa.
El enfoque de su diseño es parecerse más a un sombreador/empaquetador que también puede delinear bien, mientras que el Sidewinder es más un delineador que puede sombrear. Si prefiere más golpe a una velocidad más lenta o media, esta es una gran opción. Excelente para línea fina, negro y gris, embalaje de color con cualquier tamaño de mag. Puede impulsar 14 revestimientos, si prefiere "colocar la aguja en la piel", mientras que Sidewinder prefiere que la aguja flote sobre la piel. El Mojobox remasterizado tiene una rueda de carrera ascendente numerada (igual que el V3r) que permite una amplia gama de versatilidad a lo largo del golpe una vez en los rangos de voltaje 5.3 y superiores. Diseñado para agujas estándar. -para cartuchos, puede usar una banda elástica para negar la tensión, aunque no funcionará tan bien como con una aguja estándar. Rango de operación típico: 4 - 6 voltios Peso: 2.95 oz Versión de aluminio de peso pluma
Newly remastered, this is the 2nd variant of the 2nd generation of the Mojobox. New spring setup that enhances performance, punch, adjustability, and makes it more cartridge friendly!
Now with more versatility and ease of hit adjustment throughout the tattoo. It is more ergonomic, more reliable, and most of all, more performance focused than its predecessor. It is a punchy coil like machine with the reliability and ergonomics of a rotary.
Highlights:
Aluminum Frame with Black HD Finish
Numbered upstroke wheel (same as the V3r). The higher the number, the harder it will hit. *Please use common sense & not run it on high volts with a high setting on the upstroke wheel.
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive which is the nature of a cartridge.
Specifications:
Normal operating range: 5.3 - 6 volts for lining, 4 - 5.5 volts for shading.
Excellent for fine line, black and grey, color packing with any size mag.
Can drive 14 liners, if you prefer to “set the needle into the skin”
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive, which is the nature of a cartridge.
Weight: 2.95 oz
Made in the USA!
All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
