Holiday Discount! 20% off now until the end of the year. Discount will apply in cart.

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard CAin geometry set up to wrong quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Mill Carved Iron Frames
• Limited HD High Gloss Metallic Gray Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Custom Purple Money Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

Holiday Discount! 20% off now until the end of the year. Discount will apply in cart.

New SOBA V2 Mini Clipper Liner

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

- CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
- Reflective Black Powder Coated Finish
- Heavy Weight Brass Vise and Thumbscrew
- Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder
- 1" 8 Wrap Custom Reflective Fish Scale Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 5's to 14's All Day
- Running 130-135 Hz @ 6.5 V Unloaded
- Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
- MADE IN THE USA

NEW Dan Kubin V3/23 Sidewinder with RCA!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Machine Specs:

• HD Seafoam Powder Coated Brass Frame with 24k Gold Plated Hardware
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website

**Do not connect power to the RCA plug and Clip Cord connection at the same time, it may cause damage to your power supply, battery, and or machine. 

Holiday Discount! 20% off now until the end of the year. Discount will apply in cart.

New Limited Run of B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Fishscale
- Anodized and Laser Etched Featherweight Aluminum Frame
- Swing Gate Vise guaranteed to lock tight
- Deluxe Black Hardware
- 8 Wrap 1" Custom Coils
- Super Smooth for B&G, Soft and Quick for Building Layers
- 115-120 Hz at 6.5 V unloaded
- 5.4 oz
- MADE IN THE USA

New Workhorse x Death Cloak Hoody!

Custom Death Cloak artwork screen printed with care on high quality heavy weight black pull over hoodies. Workhorse x Death Cloak left chest horse head, mirrored flail sleeve prints, and oversized skull back print.

Handcrafted sweatshop free / ethical sweatshirts made from premium ring spun cotton 3-end fleece to achieve a smooth and stable fabric surface for printing. This premium heavyweight garment has a generous fit and is completed with a fleece lined hood, heavy gauge round drawcord, nickel eyelets, and 1x1 ribbing at cuffs and waistband.

Sweatshirts are WRAP Gold certified as well as OEKO-TEX Standard 100 Certified ensuring lawful, humane, and ethical manufacturing conditions.

NEW Dan Kubin V3/23 Sidewinder!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Machine Specs:

• Verdigris Patina Plated Brass Frame with matching Verdigris Motor Cover (*Finish may vary)
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

**Do not connect power to the RCA plug and Clip Cord connection at the same time, it may cause damage to your power supply, battery, and or machine. 

- CNC Cut Iron Frame
- HD Palleon Sex Panther Powder Coat Finish
- Matching Swing Gate Vise with and Internal Spring for ease of use
- Black Deluxe Hardware
- 1" 8 Wrap Custom matching SOBA Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 7's to 14's All Day
- Running 130-140 Hz @ 6.5 V Unloaded
- Weighs 7.2 ounces
- MADE IN THE USA

Limited Workhorse Hammers

This is a special edition run of custom mini sledge hammers we ran as year end gifts for our team of Workhorse builders. We ran a handful of extra hammers in case any issues arose with the builder gifts, but they all came out great and we decided to offer them to anyone interested. Only difference between these and the builder hammers is the exclusion of the builder names/logos on the handle.

We have lots of work into these and they are quite limited so we had to price them high. From milling custom heads, sanding, torching, and lasering handles, to antiquing, buffing, and clear coating....this project was fun but also very time consuming and involved.

These are heavy duty, fully functional, and will get the job done. They also look great on display hanging in your work station just in case the need for it's use arises.

Specs:

• Solid Brass Head with WHI Milled on both sides
  
• Antiqued, Sanded, Buffed, and Clear Coated to Maintain Head Finish
• Hand Sanded, Lasered, Torched, and Lightly Clear Coated Hickory Hard Wood Handle
  
• Overall Length is about 12 Inches
  
• Head is about 1.5" x 1.5" x 3.5"
• 2 Pound Mini Sledge Head, 2.5 Pound Overall Weight
  
• Made in the USA

*Workhorse disclaims and excludes all liability for any use or misuse resulting in consequential, incidental, direct, indirect, or any other damage or injury to self or to others.

Limited Eddy Deutsche Blade Runner Liners!

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Antique Nickel Plated Finish
  
• Custom Hand Wound 8 Wrap Coils with Purple Reflective Tape
  
• Black Deluxe Hardware
  
• Nickel Plated Copper Contact
  
• Eddy Deutsche Magic

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 130-135 Hz Unloaded at 6.5 - 7.5 Volts
  
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
• Made in the USA

Limited Eddy Deutsche Blade Runner Shaders!

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Antique Nickel Plated Finish
  
• Custom Hand Wound 8 Wrap Coils with Purple Reflective Tape
  
• Black Deluxe Hardware
  
• Nickel Plated Copper Contact
  
• Eddy Deutsche Magic

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 110-115 Hz Unloaded at 6.5 - 7.5 V
• Great for fast color packing with 5s to 13s, turn up for 15s
• Made in the USA

New Workhorse x Death Cloak Snapback Hats!

Custom Death Cloak artwork embroidered with care on high quality heavy weight black snapback hats. Workhorse x Death Cloak front panel horse head, Workhorse side text, WHI rear tag, plus inner printed banding and tag.

Handcrafted sweatshop free / ethical hats made from premium ring spun cotton to achieve a smooth and durable surface to withstand everyday wear and tear.

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Pink Anodized Components and Purple Frame, plus 24k Gold Plated Binders and Cast Iron Wingnut
• Custom Cory Rogers Laser Etched Artwork
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Olive Green Anodized Components and Ugly Green Powder Coated Frame, plus Polished Brass Binders and Cast Iron Wingnut
• Custom Smiley Guy Laser Etched Artwork Plus Pot Leaf
  
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

New Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Milled Iron Frame
  
• Over-sized Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup!
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom Hand Wound Coils with Custom Washers, 10 Wrap front and 8 Wrap Rear
  
• Custom Purple Magic Glossy Powder Coat
  
• Deluxe Gold Plated Hardware
  
• Specialty Stainless Steel Springs that will not corrode
  

Specifications:

• Medium Speed with a Solid Hit
• Running  around 130-135 Hz Unloaded at 6.5V
• Great for use with 5s to 11s, turn up for 14s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Limited Eddy Deutsche Blade Runner Liners!

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Lime Green Powder Coat Finish
  
• Custom Hand Wound 8 Wrap Coils
  
• Nickel Plated Deluxe Hardware
  
• Pure Silver Contact
  
• Eddy Deutsche Magic

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 130-135 Hz Unloaded at 6.5 - 7.5 Volts
  
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
• Made in the USA