Limited Edition Green x Green V4 Ghost Dog Liners!

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

Highlights:

• CNC Cut Iron with the highest precision and care
• Custom Olive Green 1" Keg Coil
• Custom Plateau Green Powder Coat Finish
• Deluxe Workhorse Blackened Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz

Made in the USA

New V4 Adam Ciferri Ghost Dog Shader!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• Custom Olive Green 1" Keg Coil
• Custom Plateau Green Powder Coat Finish
• Deluxe Workhorse Blackened Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit
  
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Weighs 6 oz

Made in the USA

Mike Pike x Destroy Troy Halfcup Liner!

Limited Edition 24k Gold 7075 Frame with Black Parts

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• 24k Gold Plated 7075 Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
• Deluxe Gold Plated and Black Hardware
• Spring Shelf Yoke for Superior Connectivity
• Gold Plated Pure Silver Contact Screw
• Stainless Springs
• Custom 1" 9 Wrap x 7 Wrap forward weight coil combo

Specifications:

• Medium Speed with a Solid Hit
• Running around 130-135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

Limited Mike Pike x Destroy Troy Teacup Liner - BLUCIFER!

Limited edition Blue Anodize frame with Destroy Troy Horse engraving!

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Engraved Destroy Troy Horse + Light-Up Red Eye
• Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• Green Anodized and Polished Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
• All Black Hardware
  
• Stainless Springs
• Custom 6 Wrap 1.125" Matching Coils

Specifications:

• Medium Speed with a Solid Hit
• Running around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

The SC Bobber

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Blood Red Double Powder Coat Finish
  
• Matching Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

The SC Bobber

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body 
• Hand carved, patina’d and rubbed, then sealed up with a satin varnish to give it this incredible finish.. Paired with patina’d brass hardware. The perfect look..
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Milled Iron Frame
  
• Over-sized Hammer Head Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup!
  
• Custom Hand Wound Coils with Black Prism Coil Tape
• Custom Illusion Khaki, Sea-foam Green, and Lilac Powder Coat
  
• Deluxe Hardware
  
• Specialty Stainless Steel Springs that will not corrode
  

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 5s to 11s
• 7.5 oz Forward Weighted Machine
  

Made in the USA

¡ Nuevo delineador SOBA Boomerang!

Versión fresada con CNC del Boomerang para soldar y atornillar de SOBA, aerodinámico en un marco de una sola pieza con un tornillo de banco de puerta batiente muy versátil.

Estos están finamente afinados. Sin carga, la mayoría de ellos funcionan en el rango de 140 Hz. A 6 voltios obtendrá líneas suaves de medianas a finas, piense en 05 y 08 micrones. En 7.5 enterrarán un rotulador completamente nuevo de 9-piense directamente.

- Marco de hierro dúctil cortado por CNC
- Vertical perforado y aligerado
- Tornillo de banco de puerta batiente con resorte interno para facilitar su uso
- Acabado de recubrimiento en polvo de perla de diamante personalizado
- Herrajes de latón envejecido de lujo personalizados
- Deluxe 1" 8 Wrap Black Gaffers T-Top Coils
- Spreed medio rápido con un golpe sólido
- Ideal para agrupaciones de tamaño pequeño a mediano
- Empujar 3's a 9's fácil, subir un poco para 11's
- Funcionamiento 140-145 Hz a 6,5 ​​V sin carga
- Pesa 6.8 onzas
- FABRICADO EN EE. UU.

NEW Mike Pike x Destroy Troy Halfcup Liner!

Limited edition Black x Black

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar with added weight on the front end
• Custom 1" 8 Wrap Coils 
  
• Black Anodized Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe Blackened / Nickel Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• Pure Copper Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

NEW Mike Pike x Destroy Troy Halfcup Liner!

Limited edition Green x Black

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar with added weight on the front end
• Custom 1" 8 Wrap Coils 
  
• Green Anodized Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe Blackened / Nickel Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• Pure Copper Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA