Dan Kubin V3R Sidewinder

"¡Ahora, con un tornillo de impacto ponderado actualizado! Descubrí que ayuda con la estabilidad del golpe y mejoró el rendimiento general. Además, tenga en cuenta que la posición de la banda elástica es otro elemento de ajuste simple. Para operaciones de menor voltaje o golpe más fuerte, la posición la banda apuntando ligeramente hacia arriba. Esto reducirá la tensión del resorte de retorno, lo que hará que opere mejor a velocidades más lentas y disminuya la cantidad de elasticidad. La bonificación es menos tensión en la banda de goma.

Las actualizaciones anteriores del V3R incluyen agregar el codiciado tornillo de mariposa DK, mover el tornillo de impacto (el elemento de ajuste más crucial e incomprendido) al extremo frontal de la barra de armadura y agregar un pasador de impacto de acero endurecido para que la máquina sea más fácil de reiniciar, y mantendrá su tono mucho más tiempo. También usé algunos trucos del V7 para reducir las salpicaduras y hacer que golpee un poco más rígido en el extremo inferior y también agregué los resortes de respaldo para evitar la rotura del resorte.

Estas actualizaciones se suman a la versión actualizada de 2019, que aún tiene la misma geometría confiable y probada que la v3 original, pero ahora revisada y remasterizada con diferencias sutiles para mejorar el rendimiento general. Este es el Sidewinder más fácil de usar hasta ahora. Las diferencias, además de la estética, son la rueda de carrera numerada, una marca de sincronización del tornillo de impacto en la leva y el marco (como el v5-6). Además, hice una nueva configuración de bloqueo de tornillo de banco con resorte que sujeta el tubo sin esfuerzo. La rueda de carrera está indexada en 10 posiciones y numerada en consecuencia".

Gracias por mirar - Dan.

Especificaciones de la máquina:

• Marco de latón de óxido negro con herrajes negros (*El acabado puede variar)
  
• Tornillo de mariposa DK, nueva barra de armadura y rueda de carrera actualizada para mejorar el rendimiento
• El renombrado forro rotativo. Hunde sin esfuerzo líneas de cualquier tamaño con solo rozar la piel.
• El motor es el mismo que el Sidewinder V2-V4, que ha probado la prueba del tiempo. Ha sido uno de los favoritos de los coleccionistas de Sidewinder desde hace mucho tiempo.
• Vice-Lock que se aprieta fácilmente en casi cualquier tubo
• Ideal para todas las variedades de Line Work o como Fast Shader/Packer
  
• Marca de sincronización en la leva y el marco para ajustar el tornillo de impacto. (Al igual que el V5 y V6)

• Dial de trazo numerado para que puedas jugar fácilmente con el trazo sin temor a perder ese punto óptimo. No puedes hacerlo demasiado largo o demasiado corto

Configuración de la máquina:

• Aguja estándar en la barra: envuelva una banda elástica gruesa alrededor de la tapa del motor y en la parte delantera de la máquina para aumentar la tensión de la barra de agujas. Se recomienda utilizar bandas elásticas gruesas y pezones perfectos de Dan.
  
• Cartuchos: envuelva una banda elástica alrededor de la tapa del motor y sobre la parte superior de la barra de la armadura para contrarrestar la tensión hacia arriba del cartucho. Tanto las bandas de goma gruesas como las estándar funcionan, solo dependerá de la tensión de la membrana o la banda del cartucho para determinar si la banda de goma proporciona la contrarresistencia adecuada.
  

*Totalmente oxidado en negro. *Tenga en cuenta que el latón alcanzará su punto máximo con el tiempo donde se ve muy desgastado, lo que se suma a su carácter.

Para obtener más información, mire el video de configuración y ajuste de V3R:

¡ Nuevo delineador SOBA Boomerang!

Versión fresada con CNC del Boomerang para soldar y atornillar de SOBA, aerodinámico en un marco de una sola pieza con un tornillo de banco de puerta batiente muy versátil.

Estos están finamente afinados. Sin carga, la mayoría de ellos funcionan en el rango de 140 Hz. A 6 voltios obtendrá líneas suaves de medianas a finas, piense en 05 y 08 micrones. En 7.5 enterrarán un rotulador completamente nuevo de 9-piense directamente.

- Marco de hierro dúctil cortado por CNC
- Vertical perforado y aligerado
- Tornillo de banco de puerta batiente con resorte interno para facilitar su uso
- Acabado de recubrimiento en polvo de perla de diamante personalizado
- Herrajes de latón envejecido de lujo personalizados
- Deluxe 1" 8 Wrap Black Gaffers T-Top Coils
- Spreed medio rápido con un golpe sólido
- Ideal para agrupaciones de tamaño pequeño a mediano
- Empujar 3's a 9's fácil, subir un poco para 11's
- Funcionamiento 140-145 Hz a 6,5 ​​V sin carga
- Pesa 6.8 onzas
- FABRICADO EN EE. UU.

Black Friday x Black November Mike Pike PMA Direct Drive Rotary! Special edition run of machines at special pricing!

Limited Edition Raspberry x Gold

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time. 

Highlights:

• Limited Edition Run of Transparent Raspberry Powder Coat. 24k Gold Plated Motor Cap, Swing Gate Vise, and Hardware
• High-grade Aluminum body precision milled frames and components
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Clip cord connection
• Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem
• Great with needle on bar or cartridges
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
• Lightweight at a mere 4.5 oz

Made in the USA

Black Friday x Black November Adam Ciferri Tetris Liner! Special edition run of machines at special pricing!

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Medium speed with enough power to push 3's to 14's no problem
• Tuned for all-day, every-day street shop and/or custom tattooing
• Runs about 130 Hz @ 6.5 Volts Unloaded, crank up to 7-8 Volts for large groupings
  
• 6.5 oz weight
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Mike Pike x Destroy Troy Halfcup Liner! Special edition run of machines at special pricing!

Limited Edition Black x Black with black and pink coils 

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• HD Matte Black Powder Coated Aluminum Frame
• Steel Destroy Troy Forward-Weighted Guillotine Vise
• All Black Hardware
  
• Stainless Springs
• Custom 1" 9 Wrap x 7 Wrap forward weight coil black and pink combo

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

BLACK FRIDAY x BLACK NOVEMBER Joshua Bowers SC Bobber in Seafoam! Special edition run of machines at special pricing!

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Seafoam Powder Coat Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

Black Friday x Black November Adam Ciferri Tetris Shader! Special edition run of machines at special pricing!

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's... also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Weighs 6.5 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Mike Pike x Destroy Troy Teacup Liner! Special edition run of machines at special pricing!

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Teacup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• Light Pink x Neon Yellow Powder Coated Aluminum Frame
• Matching Steel Destroy Troy Forward-Weighted Guillotine Vise
• All Black Hardware
  
• Stainless Springs
• Custom Matching 1.125" Coils

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Ghost Dog Liner! Special edition run of machines at special pricing!

Limited Sparkle Red x Gold

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Custom Keg Coil
• Custom Fractured Red Powder Coat Finish
• Deluxe 24K Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Ghost Dog Shader! Special edition run of machines at special pricing!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Custom Fractured Red Powder Coat Finish
• Deluxe 24K Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Made in the USA

BLACK FRIDAY X BLACK NOVEMBER Pike x Rogers Plateau Green x Gold rotary! Special edition run of machines at special pricing!

Special Edition Green x Gold GOOD OMEN COBRA with artwork by Julia Campione of Good Omen Tattoo!

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Highlights:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Green Hard Anodized Frame and Gold Hard Anodized Components
• Custom Good Omen Cobra Etching by Julia Campione
  
• Blackened Deluxe Hardware 
• Matching Gold Fish Scale Motor Cover 
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way

Specifications:

• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with needle on bar or cartridges
• Lightweight at a mere 4.5 oz
  

Made in the USA

NUEVO Seth Ciferri Mini-Flatside Liner

- Marco de revestimiento Mini-Flatside de ALUMINIO cortado con CNC
- Acabado con recubrimiento en polvo rosa desgastado
- Herrajes ennegrecidos de lujo
- Tornillo de banco de guillotina orientado hacia adelante, ideal para uso con la mano derecha o izquierda
- Bobinas personalizadas de 1" y 8 vueltas
- Velocidad media/lenta con un golpe fuerte
- Funcionamiento de 125 a 130 Hz a 6 V sin carga para líneas pesadas estables de un solo paso
- Empujando 5's a 11's Easy, suba durante 14 segundos dependiendo de cómo tatúe
- Con un peso de 5,3 onzas
- FABRICADO EN EE. UU.

BLACK FRIDAY x BLACK NOVEMBER Joshua Bowers SC Bobber with Olive Sparkle Finish! Special edition run of machines at special pricing!

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Sparkle Gold Dark Olive Powder Coat Finish
  
• Matching Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram