NEW Mike Pike x Destroy Troy Halfcup Liner!

Limited edition Green x Black

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar with added weight on the front end
• Custom 1" 8 Wrap Coils 
  
• Green Anodized Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe Blackened / Nickel Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• Pure Copper Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

NEW Mike Pike x Destroy Troy Halfcup Liner!

Limited edition Black x Black

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar with added weight on the front end
• Custom 1" 8 Wrap Coils 
  
• Black Anodized Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe Blackened / Nickel Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• Pure Copper Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

¡ Nuevo delineador SOBA Boomerang!

Versión fresada con CNC del Boomerang para soldar y atornillar de SOBA, aerodinámico en un marco de una sola pieza con un tornillo de banco de puerta batiente muy versátil.

Estos están finamente afinados. Sin carga, la mayoría de ellos funcionan en el rango de 140 Hz. A 6 voltios obtendrá líneas suaves de medianas a finas, piense en 05 y 08 micrones. En 7.5 enterrarán un rotulador completamente nuevo de 9-piense directamente.

- Marco de hierro dúctil cortado por CNC
- Vertical perforado y aligerado
- Tornillo de banco de puerta batiente con resorte interno para facilitar su uso
- Acabado de recubrimiento en polvo de perla de diamante personalizado
- Herrajes de latón envejecido de lujo personalizados
- Deluxe 1" 8 Wrap Black Gaffers T-Top Coils
- Spreed medio rápido con un golpe sólido
- Ideal para agrupaciones de tamaño pequeño a mediano
- Empujar 3's a 9's fácil, subir un poco para 11's
- Funcionamiento 140-145 Hz a 6,5 ​​V sin carga
- Pesa 6.8 onzas
- FABRICADO EN EE. UU.

Limited Mike Pike x Cory Rogers Linear Rotary!

Special Edition Raspberry Pink with GOOD OMEN COBRA artwork by Julia Campione of Good Omen Tattoo!

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use. 

Highlights:

• Raw precision milled high-grade Aerospace Aluminum body 
  
• Custom Pink Hard Anodized Components 
• Custom Good Omen Cobra Etching by Julia Campione
• Blackened Deluxe Hardware
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way

Specifications:

• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA

Thanks and enjoy,
Mike & Cory

Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Milled Iron Frame
  
• Over-sized Hammer Head Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup!
  
• Custom Hand Wound Coils with Black Prism Coil Tape
• Custom Illusion Khaki, Sea-foam Green, and Lilac Powder Coat
  
• Deluxe Hardware
  
• Specialty Stainless Steel Springs that will not corrode
  

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 5s to 11s
• 7.5 oz Forward Weighted Machine
  

Made in the USA

Description

Features

Benefits

Compostability / Biodegradability

Certifications

¡El forro de perro Weiner de peso mediano de Seth Ciferri 2.2! ¡Misma geometría y tamaño que la versión liviana, pero con una base más robusta y un estante de resorte que proporciona más potencia pero mantiene el peso por debajo de las 6 onzas!

**AHORA CON UN TORNILLO DE PUERTA ABATIBLE CON CARGA DE RESORTE

- Marco de hierro mecanizado CNC
- Acabado de zinc negro de lujo.
- Tornillo de banco de compuerta batiente garantizado para bloquear firmemente en cualquier tubo
- Herrajes Deluxe Black Seth y tornillo de mano para monedas Workhorse
- Bobinas selladas de 1" y 8 vueltas más correa de condensador
- Velocidad media con un golpe duro para empujar agrupaciones más grandes
- Funcionamiento 130-135 Hz a 6 V sin carga
- Empujando Loose 5's a 14's Easy
- Con un peso de tan solo 5,95 oz.
- FABRICADO EN EE. UU.

SOBA B&G Race Horse Shader

New Limited Run of B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Highlights:

• BLUE Anodized and Laser Etched Featherweight Aluminum Frame
  
• Swing Gate Vise guaranteed to lock tight
  
• Deluxe Black Hardware
  
• 8 Wrap 1" Custom Fish Scale Coils

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
  
• Weighs 5.4 oz
  

Made in the USA

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• CNC Cut Iron with the highest precision and care for superior conductivity
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Rubbed Bronze Plated Frame
• Deluxe DK 24k Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• CNC Cut Iron with the highest precision and care for superior conductivity
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Antique Nickel Plated Frame
• Deluxe DK 24k Gold Plated DK Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

The SC Bobber

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body 
• Hand carved, patina’d and rubbed, then sealed up with a satin varnish to give it this incredible finish.. Paired with patina’d brass hardware. The perfect look..
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

The SC Bobber

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Blood Red Double Powder Coat Finish
  
• Matching Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

NEW Guy Le WAVE Shader- Distressed Aqua Blue

This is the second model we have done with Guy and after almost a year of designing and dialing in, these WAVE machines are finally ready! 

Guest Builder: Guy Le Tatooer

Guy (/ɡiː/) is a world-renowned tattoo artist celebrated for his powerful, timeless tattoos executed with unparalleled precision, skill, and speed. As a second-generation tattoo artist who grew up in a tattoo shop in New Caledonia, Guy has spent most of his life traveling the globe, drawing inspiration from the diverse cultures he has lived in across Asia, Europe, and the Americas.

Throughout his journey, Guy has specialized in large-scale work, known for his ability to cover substantial areas quickly while minimizing healing time for faster recovery. His unique approach to tattooing led him to modify and build custom machines that run at higher voltages—allowing him to work rapidly while delivering the strength needed for extensive pieces.

Whether you’re familiar with his work or experiencing it for the first time, Guy Le brings a fresh and formidable approach to tattooing that embodies both artistry and innovation.

Highlights:

• Precision Machined Iron Frame Designed by Guy Le Tatooer
  
• Distressed Aqua Blue Powder Coated Finish
  
• Custom Hand Wound Coils with Laser Etched Coil Washers and Silver Fish-scale Reflective Tape
  
• Lightly Polished Raw Deluxe Hardware
  

Shader Specifications:

• Power Shader
• Medium/Quick Speed with a Solid Hit
• Designed to run like Guy tattoos
• Running  around 115 Hz Unloaded
  
• Guy prefers to run these hard at 8-9 Volts, but they also work well at lower voltage at 6-8 Volts for a bit less aggressive tattooing.
  
• Setup with O-ring Spring Setup for more power and consistency with higher voltage use. If O-Ring is removed they will be less aggressive and slower at lower voltage. 
• Great for fast color packing or gradation with 5s to 13s, turn up for 15s+
• Made in the USA