Limited Mike Pike x Destroy Troy Taza de té - Rosa x Negro

¡Máquinas colaborativas especiales de edición limitada de Mike Pike y Destroy Troy! Esto ha estado en proceso durante bastante tiempo, pero después de muchos ajustes de marco, ajustes y actualizaciones, están marcados y listos. Con un funcionamiento muy suave, extremadamente bien equilibrado y resistente, estas máquinas con peso hacia adelante están finamente ajustadas y construidas para años de uso sin problemas.

Reflejos:

• Marco de taza de té de aluminio grueso con varias actualizaciones para ayudar con la resistencia general a largo plazo y la reducción de vibraciones
• Tornillo de banco de acero estilo Jonesy grueso diseñado para mantener más peso sobre su mano para ayudar a equilibrar el tirón de su clipcord y reducir la fatiga de la mano
• Ennegrecido Destroy Troy Warp Drive Cray Bar
  
• Bobinas personalizadas de 1.125" y 7 vueltas
  
• Marco de aluminio con recubrimiento de polvo de oro rosa disco
• Prensa de guillotina de acero ennegrecido Destroy Troy
  
• Herrajes ennegrecidos de lujo
  
• Yugo de estante de resorte ennegrecido para una conectividad superior
• Tornillo de contacto de cobre de lujo
  
• Resortes inoxidables

Especificaciones:

• Velocidad media con un golpe sólido
• Corriendo alrededor de 135 Hz Descargado a 6.5V
• Excelente para usar con 3s a 9s, suba durante 11s
• Máquina ponderada hacia adelante de 7.5 oz
• Hecho en los EE. UU.

Revestimiento de hierro fundido Mike Pike x Ernie Carafa

Marco colaborativo muy especial diseñado y fundido en hierro por Mike Pike y Ernie Carafa hace años, recientemente encontrado y sacado de baldes oxidados, limpiado, fresado CNC con prensas de pinza soldadas y construido por Mike Pike.

• Marco de hierro fundido
  
• Acabado de zinc negro.
• Herrajes ennegrecidos de caballo de batalla de lujo
• Barra de armadura de pezón largo
• Postes de encuadernación de acero ennegrecido
• Bobinas de caballo de batalla de 8 vueltas de 1.125"
• Velocidad lenta con un golpe largo y un golpe sólido
• Funcionamiento 125-130 Hz descargado a 6,5 ​​voltios
• Ideal para usar con 5s a 11s
• Fabricado en los Estados Unidos por Mike Pike.
• Tuerca de mariposa orientada hacia adelante que no montará su mano ni se interpondrá en el camino
• Máquina sólida que pesa alrededor de 8 onzas
  

*BLACK FRIDAY Special Edition run at special pricing!

Dan Kubin V3/23 Sidewinder with RCA!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Machine Specs:

• Distressed HD Red Powder Coated Aluminum Frame with 24k Gold Plated Hardware
  
• Featherweight Aluminum version provides the same performance weighing in a couple ounces less than the Brass version at about 3.5 ounces
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website

 Limited Edition BLACK FRIDAY Special!

Limited Eddy Deutsche V2 Blade Runner Shaders now in a more compact frame! Same great power and precision, less weight and bulk. 

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Distressed Black Powder Coat Finish
  
• Custom Hand Wound 8 Wrap Coils with Purple Reflective Tape
  
• Polished Nickel Plated Deluxe Hardware
  
• Pure Silver Contact
  
• Eddy Deutsche Magic

Specifications:

• Medium / Quick Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 115-120 Hz Unloaded
  
• Eddy prefers to run these hard at 7-8 Volts, but also work well at lower voltage for a bit less aggressive tattooing 
• Great for fast color packing with 5s to 13s, turn up for 15s
• Made in the USA