Mike Pike x Destroy Troy Jonesy Transatlántico

¡Estas son las segundas máquinas colaborativas especiales de edición limitada de Mike Pike y Destroy Troy! Esto ha estado en proceso durante bastante tiempo, originalmente Jonesy iba a ser su primera máquina colaborativa, pero Teacups intervino primero mientras marcábamos estas máquinas Jonesy. Ahora, después de muchos ajustes, retoques y actualizaciones de marcos, han evolucionado y mejorado, y no podríamos estar más contentos con el resultado. Con un funcionamiento muy suave, extremadamente bien equilibrado y resistente, estas máquinas con peso hacia adelante están finamente ajustadas y construidas para años de uso sin problemas.

Reflejos:

• Base Jonesy modificada de aluminio chapado en oro de 24 quilates con varias actualizaciones para ayudar con la resistencia general a largo plazo y la reducción de vibraciones
• Tornillo de banco de acero súper grueso chapado en oro de 24 quilates diseñado para mantener más peso sobre su mano para ayudar a equilibrar el tirón de su clipcord y reducir la fatiga de la mano
• Cray Bar Destroy Troy Warp Drive chapado en oro de 24 quilates
• Bobinas de dinero personalizadas de 8 envolturas personalizadas con cinta de pescado reflectante
  
• Jonesy vertical de latón chapado en oro de 24 quilates
  
• Tornillo de banco chapado en oro de 24 quilates y herrajes de lujo

Especificaciones:

• Velocidad media con un golpe sólido
• Funcionamiento 135-140 Hz Descargado a 6V
• Excelente para usar con 3s a 9s, suba durante 11s
• Máquina ponderada hacia adelante de 7.5 oz
• Hecho en los EE. UU.

Kit de forro de Chris Smith Hater de lujo limitado

El kit incluye todas las piezas necesarias para construir una gran máquina de tatuar... pero no incluye las habilidades para construir una gran máquina de tatuar, lo siento, no lo siento :)

• Marco Carnivore de aluminio cortado con CNC
• acabado crudo
• Herrajes ennegrecidos de lujo
• Bobinas soldadas personalizadas de 1 "y 8 envolturas
• Yugo con incrustaciones de 1/8"
• 2 opciones de barra de armazón de revestimiento
• 4 juegos de resortes con cada kit
  
• Todos los tornillos que necesitará MÁS las llaves necesarias (aunque necesitará un destornillador de cabeza plana)
  
• Paquete de arandelas que incluye todas las arandelas necesarias (acero, fibra y calzas)
• Herramienta de alineación incluida (accesorio de armadura opcional*)
  
• pesa 5.6 onzas

Especificaciones típicas del forro:

• Empuja 5's a 11's Easy
• Carrera larga, velocidad media con un golpe pesado
  
• 130-135 Hz a 6,5 ​​V sin carga

*Viene con o sin nuestro accesorio de barra de armadura. Recomendamos elegir uno si no tiene uno, es, con mucho, la mejor manera de ensamblar su barra de armadura y resortes con la alineación y el apriete adecuados.

Hecho en los EE. UU.

Introducing New Guest Builder: Guy Le Tatooer

Guy (/ɡiː/) is a world-renowned tattoo artist celebrated for his powerful, timeless tattoos executed with unparalleled precision, skill, and speed. As a second-generation tattoo artist who grew up in a tattoo shop in New Caledonia, Guy has spent most of his life traveling the globe, drawing inspiration from the diverse cultures he has lived in across Asia, Europe, and the Americas.

Throughout his journey, Guy has specialized in large-scale work, known for his ability to cover substantial areas quickly while minimizing healing time for faster recovery. His unique approach to tattooing led him to modify and build custom machines that run at higher voltages—allowing him to work rapidly while delivering the strength needed for extensive pieces.

In collaboration with Guy, we’ve had the privilege of updating his Om machine, optimizing it for his intense style. By incorporating mini coils and reducing its size and weight, we have maintained the speed and power crucial to Guy's technique, while enhancing efficiency to run the machines in a more reasonable voltage range.

Whether you’re familiar with his work or experiencing it for the first time, Guy Le brings a fresh and formidable approach to tattooing that embodies both artistry and innovation.

Highlights:

• Individual Shader Machine
  
• Precision Machined Iron Frame Designed by Guy Le Tatooer
  
• Seafoam HD Powder Coated Finish
  
• Custom Hand Wound 8 Wrap Coils with Purple Reflective Tape
  
• Polished 24k Gold Plated Deluxe Hardware
  
• Gold Plated Pure Copper Contact

Liner Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Guy tattoos
• Running  around 130 Hz Unloaded
• Guy prefers to run these hard at 8-9 Volts, but they also work well at lower voltage at 6-8 Volts for a bit less aggressive tattooing
  
• Setup with O-ring Spring Setup for more power and consistency with higher voltage use. If O-Ring is removed they will stronger and slower at lower voltage. 
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s to 18s
  
• Made in the USA

*BLACK FRIDAY Special Edition run at special pricing! New V2 GDR Limited Edition Run with Wild Style Powder Coat Finish!

This is the new updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Dan Kubin X Adam Ciferri Ghost Dog Revival V2 Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to easily push 3 to 18 Rounds and up to 49 mag
  
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 8-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• HD Olive x White x Purple x Ugly Green Powder Coat Finish
• Deluxe DK Blackened Hardware and Specialty Spring
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Limited Adam Ciferri Tetris Liner - Nickel x Gold

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• Forward weight Limited Edition with Ghost Coil set up
• Keg Coil for extra power and larger operating range / versatility 
• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough power to push 3's to 14's no problem
• Runs about 130 Hz @ 6.5 Volts Unloaded, crank up to 7-8 Volts for large groupings
  
• 1" Custom Reflective Keg Coil
  
• Deluxe 24k Gold Plated Binders, A-bar, and Thumbscrew
  
• 6.5 ounce weight
  
• MADE IN THE USA

New Limited Run of B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Fishscale
- Anodized and Laser Etched Featherweight Aluminum Frame
- Swing Gate Vise guaranteed to lock tight
- Deluxe Black Hardware
- 8 Wrap 1" Custom Coils
- Super Smooth for B&G, Soft and Quick for Building Layers
- 115-120 Hz at 6.5 V unloaded
- 5.4 oz
- MADE IN THE USA

NEW Dan Kubin V3/23 Sidewinder with RCA!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Machine Specs:

• HD White Powder Coated Brass Frame with 24k Gold Plated Hardware
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website

New Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Machined Iron Frame
  
• Over-sized Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup!
• Blackened Destroy Troy Warp Drive Cray Bar
  
• Custom Hand Wound Coils, 9 Wrap Front and 7 Wrap Rear
  
• Custom Nickel Plated Finish
  
• Deluxe Black Hardware plus pure Copper Contact
  

Specifications:

• Medium Speed with a Solid Hit
• Running  around 130-135 Hz Unloaded at 6.5V
• Great for use with 5s to 11s, turn up for 14s
• 7.5 oz Forward Weighted Machine
• Made in the USA

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to run quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Milled Carved Iron Frames
• HD High Gloss Translucent Burnt Earth Frame
  
• Deluxe Workhorse Polished Brass Hardware
• 1.125" 10 Wrap Custom Etched Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running around 145 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

New Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Milled Iron Frame
  
• Over-sized Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup!
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom Hand Wound Coils with Custom Washers, 10 Wrap front and 8 Wrap Rear
  
• Custom Purple Magic Glossy Powder Coat
  
• Deluxe Gold Plated Hardware
  
• Specialty Stainless Steel Springs that will not corrode
  

Specifications:

• Medium Speed with a Solid Hit
• Running  around 130-135 Hz Unloaded at 6.5V
• Great for use with 5s to 11s, turn up for 14s
• 7.5 oz Forward Weighted Machine
• Made in the USA

New V4 Adam Ciferri Ghost Dog Shader!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit
  
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Custom Gloss Black Powder Coat Finish
• Deluxe Workhorse Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.