NEW Deluxe Workhorse V3 Power Supply w/ Internal Battery and Metered Readouts!

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium-ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD Black Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

Custom Printed Workhorse Face Mask (2 Pack)

• Made of Quilted Thick 3-Ply Fabric
• Elastic Straps - One Size Fits Most
• Two Masks included in each order
• Three Custom Sublimated Design Options
• Washable and Reusable
• Handmade In England not China :)

CDC Information on How to wear a Face Covering - Click Here

Please note: These custom face masks are NOT medical grade masks (which are recommended by the World Health Organization (WHO) as an infection preventative measure, i.e. grade FFP2/N95). So please DO NOT purchase custom face masks with the false understanding they will prevent infection from Coronavirus. They are more about protecting others to reduce spread. Due to the personal hygiene nature of the product, your custom face masks are non-returnable.

***COVID-19 UPDATE: We are shipping daily and have now expanded our requirements to include Medical Professionals. We still do not sell to at home tattooers but gladly sell to any medical professionals that need supplies. You are top priority, thank you for all you do!


Workhorse Finger Switch

No need for a foot switch with our new Workhorse Finger Switch! Simply plug our custom finger switch into the foot pedal outlet on your power supply and easily toggle your power to constant on or off at the flip of a switch.

Made in the USA, with only the finest materials and components.

Occasionally we offer various styles of Hand Poke Tattoo Tools....whether for fun or for personal preference, these are well made useful tools for various types of tattooing.

These fit standard tubes and needles, simply setup like a regular machine and bang away.

Occasionally we offer various styles of Hand Poke Tattoo Tools....whether for fun or for personal preference, these are well made useful tools for various types of tattooing.

These fit standard tubes and needles, simply setup like a regular machine and bang away.

Workhorse Irons Dot Box

Small batch of Workhorse Dot Boxes now available!! After many requests we decided to do another small batch of these. Originally we made Dot Boxes about 10 years ago using Pulse Width Modulation to create intermittent power bursts for dot work. But we stopped making them after a few years when some others copied the design and outsourced overseas to make a cheap knock off version. 

This has been a fun side project we have been working on to help turn any coil machine into a dot machine for making Dotwork Tattoos using controlled intermittent power bursts. The Dot Box is simple and easy to use! It works in-line and plugs directly into your power supply in the clip cord hole and has a range of speed controlled by simply turning the delay knob.

Yes, there are many ways to do dots and if you have a strategy that works well for you already, more power to you! Our Dot Box is just a different approach, and if nothing else, a fun tool to play with, enjoy!

For Best Performance:

• The Dot Box works best with medium or slow, hard hitting liners....or any shader
• Quick and zippy light hitting machines are not as effective
• Best dots are made using Tight Rounds....Loose Rounds seem to blow out a little bit
• Some machines need to be turned up a Volt or two for better results
• Not recommended for use with Rotary machines...use with Rotary machines can damage the motor
• Timing of the tattoo machine when in use with the Dot Box will create various rhythms and patterns, adjust voltage and Dot Box Delay for varying performance and effect
• Match hand speed to the intermittent power bursts to ensure clean dot patterns.... if the Dot Box is at a slow setting you will need to move slower, fast setting move faster (duh).

*this is not a power supply, you will still need a power supply, the dot box simply plugs into your power supply.

Workhorse Irons Umbrella! We have wanted to do these for years and finally pulled the trigger on running some. We had a bunch of these made end of last year as customer appreciation gifts for our top customers and added on some extras to offer this spring/summer. Staying dry has never looked so good. 

• High quality 54" umbrella designed to block rain and or sunshine
• Black with large format Workhorse Logo Print
• Push Button Auto Open with Manual Non-Auto Close
• Curved handle to fit in your hand well and not blow away or fall on the ground
• It is quite large, 54" is the size of most golf umbrellas if that helps
• It is definitely an umbrella, not much more to say. 
  

Highlights:

• Workhorse Olive Green Powdercoat finish
  
• Push Button Constant On 
  
• Infinite Knob with Power Ranging From 1V to 15V
  
• Dual Programmable Clip Cord Options
  
• Will work with all Coil and Rotary Machines
  
• 110 V US electrical plug (220V EU Option Available)
  
• Clean and Consistent Power
  
• Weighing in at a mere 7 ounces
  
• 4.25" X 2.25" X 1.25" Steel Body
  
• 1 Year Warranty

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

Workhorse Model 6 Liner

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Full Size Frame milled in house from a solid block of Ductile Iron
• HD Flat Black Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 8 Wrap 1" Coils with 1/4" Steel Yoke 
• High End Specialty Steel Springs
• Solid Copper Contact with Allen Key Insert
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

Workhorse Model 6 Liner

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Full Size Frame milled in house from a solid block of Ductile Iron
• Kawasaki Green Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Solid Copper Contact with Allen Key Insert
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA